• The Journal of the Korea Contents Association
• /
• v.18 no.3
• /
• pp.52-61
• /
• 2018

This research suggested the traffic signal timing calculation model for signal intersections based on sectional travel time. A detection system that collects sectional travel time data such as Urban Transport Information System(UTIS) is applied. This research developed the model to calculate saturation flow rate and demand volume from travel time information using a deterministic delay model. Moreover, this model could determine the traffic signal timings to minimize a delay based on Webster model using traffic demand volume. In micro simulation analysis using VISSIM and its API ComInterface, it checked the saturation conditions and determined the traffic signal timings to minimize the intersection delay. Recently, sectional vehicle detection systems are being installed in various projects, such as Urban Transportation Information System(UTIS) and Advanced Transportation Management System(ATMS) in Korea. This research has important contribution to apply the traffic information system to traffic signal operation sector.

• Journal of Korean Society of Transportation
• /
• v.23 no.1
• /
• pp.67-80
• /
• 2005

In this paper, the primary objective of the research are to review the methods currently avaliable for estimating the delay incurred by vehicles at signalized intersections. The paper compares the delay estimates from a deterministic queueing model, a model based on shock wave theory , the steady-state Webster model, the queue-based models defined in the 1994 and 2001 version of the High way Capacity Manual, in addition to the delays estimated from the TRANSYT-7F macroscopic simulation and NETSIM microscopic simulation. More especially, this paper is to compare the delay estimates obtained using macroscopic and microscopic simulation tools against state-of-the practice analytical models that are derived from deterministic queueing and shock wave analysis theory. The results of the comparisons indicate that all delay models produce relatively similar results for signalized intersections with low traffic demand, but that increasing differences occur as the traffic demand approaches saturation. In particular, when the TRANSYT-7F and NETSIM are compared, it is highly differences as approach for traffic condition to over-saturation. Also, the NETSIM microscopic simulation is the lowest estimates among the various models.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.131-139
• /
• 1999

The quality of progression at signalized intersection has the largest potential effect. TRANSYT-7F is widely used to estimate the signal progression delay, but the progress of collecting and executing the compute program appears to be rather cumbersome. The research is to develop the analytical and progressing platoon delay model that is as simple as the methodology of HCM and familiar with the output of simulation model. The general approach to this research was conducted to examine the Rouphail and NCHRP 339 methodology together with the existing progression delay model (TRANSYT-7F. HCM). The scope is contained to be applicable only to cycles with no overflow queue and to obtain a comprehensive evaluation of the effects of changes in the quality of traffic signal progression on stopped delay and to be analyzed a simple mathematical method. The principle assumption for this model is that secondary flows is dispersed and partly mixed with average flow of the primary progressed flow. A second assumption is that through flow is consisted with the part of saturation flow at the front of it and the part of average flow at the rear of it. The delay equations vary for two arrival. The conclusion of this study could be summarized as 1)The evaluation of this model was consistently similar to that of TRANSYT-7F, 2) Platoon pattern has the real traffic flow characteristics. 3) The computing process of progression delay is made to have simple logic and easy calculation by integration, 4) This model could be estimated to be applied in almost all case.

• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.105-114
• /
• 1998

Roundabout의 교통운영 특성에 대한 연구에서는 5거리 도로체계의 올바른 분석과 로타리에서 일어나는 진입로의 교통량, 회전교통량, 속도, 거부gap, 수락gap, 추종간격, 기하구조등을 조사 분석하여 수락간격 모형을 바탕으로 비신호교차로의 용량산정과 지체시간을 산정하기 위한 모형을 구축하는데 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3D
• /
• pp.295-306
• /
• 2008

The Intersection is inner traffic facilities and the space where the roads are intersected and connected. And also, the Intersection is the decision-making section for drivers to select the route according to the geometric structure and operation method. However decision-making section cause to raise car accidents rate because it imposes a heavy burden on drivers. In that reason, many countries such as Europe use the Roundabouts to reduce the numbers of decision making and collision. In Korea, the kinds of method are just introduced and it is using now but there are no exact standards. Hence, this study suggests the process to evaluate and determine the types of Intersection which are based on the traffic flow (congestion) and traffic safety (accidents). Firstly, this study presents the number of accident at each Intersection which is depended on the traffic volume. Secondly, this study calculates and analysis the accident at signalized Intersection, non-signalized Intersection and Roundabout by TSIS-NETSIM program. Thirdly, this study concludes the best suitable Intersection type through the materials which are mentioned before.

• Journal of Korean Society of Transportation
• /
• v.32 no.4
• /
• pp.410-420
• /
• 2014

This research suggests a new tram signal priority model which determines signal timings and tram intersection waiting time using analytical method. This model can calculate the signal timings for Early Green and Green Extension among the active tram signal priority techniques by tram detection time of upstream detector. Moreover, it can determine the tram intersection waiting time that means tram intersection travel time delay from a vantage point of tram travel. Under the active tram signal priority condition, priority phases can bring additional green time from variable green time of non-priority phases. In this study, the signal timing and tram intersection waiting time calculation model was set up using analytical methods. In case studies using an isolated intersection, this study checks tram intersection waiting time ranged 12.7 to 29.4 seconds when variable green times of non-priority phases are 44 to 10 seconds under 120 seconds of cycle length.

• Journal of Korean Society of Transportation
• /
• v.30 no.6
• /
• pp.71-80
• /
• 2012

This research suggested a real-time traffic signal control algorithm using individual vehicle travel times on an isolated signal intersection. To collect IDs and passing times from individual vehicles, space-based surveillance systems such as DSRC were adopted. This research developed models to estimate arrival flow rates, delays, and the change rate in delay, by using individual vehicle's travel time data. This real-time signal control algorithm could determine optimal traffic signal timings that minimize intersection delay, based on a linear programming. A micro simulation analysis using CORSIM and RUN TIME EXTENSION verified saturated intersection conditions, and determined the optimal traffic signal timings that minimize intersection delay. In addition, the performance of algorithm varying according to market penetration was examined. In spite of limited results from a specific scenario, this algorithm turned out to be effective as long as the probe rate exceeds 40 percent. Recently, space-based traffic surveillance systems are being installed by various projects, such as Hi-pass, Advanced Transportation Management System (ATMS) and Urban Transportation Information System (UTIS) in Korea. This research has an important significance in that the propose algorithm is a new methodology that accepts the space-based traffic surveillance system in real-time signal operations.

• Journal of Korean Society of Transportation
• /
• v.26 no.2
• /
• pp.89-100
• /
• 2008

In an urban network controlled by traffic signals, there is an interaction between the signal timing and the routes chosen by individual road users. This study develops a bi level programming model for traffic signal optimization in networks with path based traffic assignment. In the bi level programming model, genetic algorithm approach has been proposed to solve upper level problem for a signalized road network. Path based traffic assignment using column generation technique which is proposed by M.H. Xu, is applied at the lower-level. Genetic Algorithm provieds a feasible set of signal timings within specified lower and upper bounds signal timing variables and feeds into lower level problem. The performance of this model is investigated in numerical experiment in a sample network. In result, optimal signal settings and user equilibrium flows are made.

• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.123-134
• /
• 2002

감응식 신호운영변수 설계에 관한 연구는 정주기식 신호운영변수 설계의 그것보다 그 수준이 현저히 미비하며 이는 감응식 신호운영 특성을 반영한 평가방법의 부재로 감응식 운영변수의 평가가 불가능하였기 때문이다. 본 논문은 최근에 소개된 평균 감응현시 녹색시간 추정 수리모형을 이용하여 Highway Capacity Manual (HCM) 지체도를 최소화하는 최대녹색시간의 설계방안을 제시한다. - '최소녹색시간'과 '단위연장시간'은 보행자 횡단시간 및 차량 차두시간 등 지역별 운전자/보행자의 특성과 관련이 있어 일반적인 최적화 설계 수리모형의 적용에 무리가 있어 제외한다. 제안된 설계방안은 감응식 운영논리를 토대로 감응현시 군의 평균녹색시간과 평균주기를 산정하며, HCM 지체도를 평가하고, 가능한 대안 중 지체를 최소화하는 최대녹색시간 운영변수 군을 '혼혈 유전자 알고리즘'으로 도출한다. 현장실험을 통해 도출이 불가능한 실제 최적치를 Corridor Simulation(CORSIM)모형을 이용하여 추정하였고 이를 제안된 설계방안으로 도출된 최대녹색시간 운영변수' 값들과 비교하였다. 비교결과 교차로 v/c 비율이 1.0 보다 낮을 시는 제안된 방법을 통해 설계된 최대녹색시간 운영변수 군이 최소 CORSIM 지체도를 산출하는 최대녹색시간 운영변수 군과 동일한 것으로, v/c비율이 1.0보다 높을 시는 다른 것으로 결과되었다. v/c비율이 1.0 보다 높은 경우는 정주기식 교차로 운영에 효율적이라 감응식 운영의 필요를 벗어나므로 제안된 최대녹색시간 설계방안은 감응식 신호운영 필요범위 내에서 효율적이다. 기존의 최대녹색시간 설계는 정수기식 최적녹색시간을 기준으로 최대녹색시간을 추정하며, 그러한 과정을 돕기 위하여 추정범위(설계자가 범위 내에서 임의로 선택함)를 제시하는 것이 기존의 연구임을 비교하면 본 연구에서 제안하고 있는 설계방법의 의미가 크다.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.471-478
• /
• 2003

In the Signalized Intersection, the capacity analysis is conducted with a large amount of input data such as road way, traffic and signal condition. but the level of service(LOS) is determined by delay estimated as a measure of effectiveness (MOE) based on this procedure. However, It is under the circumstances which are not considered for the errors caused by the uncertainty of input data in the field(the turing volumes, lane geometry, signal timing, grade of approach lane, percentage heavy vehicles, peak hour factor and arrival type etc.) as become the bases in the determination of the capacity and LOS. It includes the problem of reliability which is not verified for the capacity and LOS estimated. So, this study is to suggest the minimization of their influences by examining whether the uncertainty of input data such as the traffic volume, percentage of heavy vehicles and roadway geometry on the approach lane in the intersection under the study affects the capacity analysis and LOS determination.