• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.7
• /
• pp.265-274
• /
• 2019

The reliability test performed when developing the weapon system software is classified into static test and dynamic test. In static test, checking the coding rules, vulnerabilities and source code metric are performed without executing the software. In dynamic test, its functions are verified by executing the actual software based on requirements and the code coverage is measured. The purpose of this static/dynamic test is to find out defects that exist in the software. However, there still exist defects that can't be detected only by the current reliability test on the weapon system software. In this paper, whether defects that may occur in the software can be detected by static test and dynamic test of the current reliability test on the weapon system is analyzed through experiments. As a result, we provide guidance on improving the reliability test of weapon system software, especially the dynamic test.

• Journal of Applied Reliability
• /
• v.10 no.1
• /
• pp.1-9
• /
• 2010

In general, the performance of a component degrades as time goes by and failure of a component occurs when the performance degradation reaches a pre-specified level. It is difficult to obtain the failure time distribution data or the necessary number of failure data especially for the metal or machine part. Thus, a design of reliability qualification test based on performance distribution is more effective than failure time distribution. In this study, a performance-based reliability qualification test is developed and a numerical example is provided to illustrate the use of the developed reliability qualification test. This approach could be applied to many kinds of metal or machine part whose magnitude of strength could not be evaluated during at any random points but judgement can be made by only failure of the part. Besides, it is also possible that any parts which have a similar failure characteristics could be applicable to the developed reliability qualification test.

• Journal of the Korean Society for Railway
• /
• v.11 no.3
• /
• pp.233-239
• /
• 2008

It is very important to set a reliability target and verify the requirement when procuring the rolling stock in the aspect of safety, availability and LCC. While there are a few different methods to verify the reliability target, it is required that the most appropriate method should be used considering the characteristics of rolling stock itself and the operation environment. Even though recently the quantitative reliability requirements are widely adopted in domestic market, there is no substantial contents in the various standards and guidelines. In this study we investigate the various reliability demonstration test plans and evaluate them for rolling stock application. And three test plans among them were applied to the real operation data.

• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.578-583
• /
• 2021

This paper describes acceleration tests for reliability of semiconductors. It also describes AEC-Q100, international test standard for reliability of automotive semiconductors. Semiconductors can be used for dozens of years. So acceleration tests are essential to test potential problems over whole period of product where test time is minimized by applying intensive stresses. AEC-Q100 is a typical acceleration test in automotive semiconductors, and it is designed to find various failures in semiconductors and to analyze their causes of occurance. So it finds many problems in design and fabrication as well as it predicts lifetime and reliability of semiconductors. AEC-Q100 consists of 7 test groups such as accelerated environmental stress tests, accelerated lifetime simulation tests, package assembly integrity tests, die fabrication reliability tests, electrical verification tests, defect screening tests, and cavity package integrity tests. It has 4 grades from grade 0 to grade 3 based on operational temperature. AEC-Q101, Q102, Q103, Q104, and Q200 are applied to discrete semiconductors, optoelectronic semiconductors, sensors, multichip modules, and passive components, respectively.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.04a
• /
• pp.419-432
• /
• 2011

제품의 신뢰성에 대한 소비자의 인식이 높아짐에 따라 기업에서는 높은 품질과 신뢰성 있는 제품을 만들기 위해 많은 노력을 하고 있다. 신뢰성은 기기, 부품, 재료 등 시스템이 규정된 조건하에서, 의도하는 기간 동안 규정된 기능을 고장 없이 수행할 수 있는 성질로 규정된다. 높은 신뢰성의 확보를 위한 제품의 신뢰성 시험은 많은 시간과 비용이 소모되기 때문에 현대의 빠른 시장 흐름에 따라가지 못한다. 특히, 최근 기술발전 속도가 빨라지고 제품 수명주기(Life Cycle)와 개발 기간이 짧아지고 있는 추세에 있으므로 이에 대응할 수 있는 신속한 시험방법의 실시가 반드시 필요한 시점이다. 위와 같은 신뢰성을 갖는 제품의 시험의 한계를 극복하고 시험시간을 단축하기 위한 여러 가지 방법이 연구되어 왔고, 그 중 가속 시험(Accelerated Test)에 대한 필요성과 요구가 계속 증가하고 있는 추세다. 본 연구에서는 단순부품과 재료의 신뢰도 정보를 신속하게 얻는데 매우 유용한 신뢰성 시험방법 중에 하나인 가속시험의 연구동향과 적용 현황을 분석하고 이의 효과적인 적용과 활용방안을 모색 하고자 한다.

• Journal of Advanced Engineering and Technology
• /
• v.11 no.4
• /
• pp.259-265
• /
• 2018

In this paper, we propose a test method to evaluate the reliability of the recliner sofa in the early stage of production. In order to develop the test method, we analyzed the failure mechanism occurring in the field and designed the performance test, environmental test, accelerated life test methods based on the analysis of failure mechanism. The failure mechanism is reproduced by applying the designed test. The reliability of the recliner sofa can be verified at the production stage through the proposed test method.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.9
• /
• pp.11-18
• /
• 2017

Numerical analysis method for prediction of pile behaviour characteristics has widely been used in detail design process before construction because field static loading test requires high cost. However, the reliability verification of numerical analysis of result is not permitted compare with field test. In this study, to verify the numerical analysis results, pile behaviour prediction was compared with field static loading test results. For exact analysis of interaction between pile and ground, soil investigation and in-situ test such as boring, SPT and bore-hole shear test were performed before pile static loading test. During the static loading test, pile behaviour characteristics were analyzed under every loading condition. After static pile loading test, numerical analysis was carried out under same condition with static pile loading test. In the numerical analysis, to apply same loading condition with each loading condition in the field test and to compare with between the results of numerical analysis, the field test results for reliability were verified with the results of numerical analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.261-268
• /
• 2018

The use of electric cable was limited due to the installation time and large space as the increase of power demand and load quantity in side line. In order to solve these problems, the application of busway system which can supply the large current was increasing. But it was lack of methods of performance tests to evaluate the reliability and results of test for busway system. In this paper, we presented items to evaluate the reliability test for epoxy coated busway system with reference to IEC 61349-6. In addition, we proposed items to evaluate the reliability and long term life cycle test for the epoxy coated busway system. The combined acceleration deterioration test that reflects actual conditions of the survey as much as possible was conducted considering both thermal and electrical stresses. The deterioration condition was selected to satisfy fifty years life expectation and the insulation performance verification test of the busway system confirmed the long term life prediction. Furthermore, as test items for reliability assessment of compliance with the environment for the use of temperature, humidity and load current where busway system was installed, thermal overload test, water immersion test, cold shock temperature test and thermal cycle test were performed. And we examined changes in characteristics and abnormality after tests. From results, the test items presented to evaluate performance and reliability of the epoxy insulated busway system were confirmed to be appropriate in this paper, and the performance of the product was also confirmed to be excellent for reliability tests.

• Journal of Applied Reliability
• /
• v.12 no.3
• /
• pp.131-138
• /
• 2012

A design of reliability qualification test based on performance distribution is developed. In general, the performance of an item degrades as the time goes by and the failure of an item occurs when the performance degradation reaches the pre-determined critical level. This article considers the reliability qualification test based on a more tightened critical value at the earlier stage to reduce the evaluation testing time and cost. A numerical example is provided to illustrate how to use the developed reliability qualification test.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.12
• /
• pp.151-159
• /
• 2022

In this paper, we propose the standardization architecture and weapon-sensor simulator for efficient reliability test in combat system. To reduce man-month of reliability test, application with high dependency on other module is selected and apply FORM. The proposed standardization architecture extracts common, variable elements and design patterns, S.O.L.I.D principles were applied. The proposed weapon-sensor simulator implements essential functions by identifying highly dependent element of other modules and the information from equipment can be directly received without processing by using communication middleware. As a result, it can replace actual ship-mounted equipment. In addition, it is possible to reduce the consumption rate of human resources when perform reliability test and modification time can be shorted.