DOI QR코드

DOI QR Code

Reliability Verification of Numerical Prediction Method on Pile Behaviour Characteristics using Field Static Loading Test

현장정재하시험을 이용한 말뚝 거동특성 수치해석 예측기법의 신뢰성 검증

  • Received : 2017.07.24
  • Accepted : 2017.08.25
  • Published : 2017.09.01

Abstract

Numerical analysis method for prediction of pile behaviour characteristics has widely been used in detail design process before construction because field static loading test requires high cost. However, the reliability verification of numerical analysis of result is not permitted compare with field test. In this study, to verify the numerical analysis results, pile behaviour prediction was compared with field static loading test results. For exact analysis of interaction between pile and ground, soil investigation and in-situ test such as boring, SPT and bore-hole shear test were performed before pile static loading test. During the static loading test, pile behaviour characteristics were analyzed under every loading condition. After static pile loading test, numerical analysis was carried out under same condition with static pile loading test. In the numerical analysis, to apply same loading condition with each loading condition in the field test and to compare with between the results of numerical analysis, the field test results for reliability were verified with the results of numerical analysis.

수치해석기법을 이용한 말뚝의 거동특성 예측방법은 정재하시험비가 고가이기 때문에 공사 전 말뚝의 거동을 예측할 수 있다는 장점으로 설계단계에서 널리 이용되고 있지만 그 신뢰성에 대한 연구는 부족한 실정이다. 본 연구에서는 실제 현장에서 말뚝의 거동과 수치해석으로 예측한 말뚝의 거동을 비교함으로써 수치해석 기법의 신뢰성을 검증하였다. 지반과 말뚝의 상호작용에 의한 말뚝의 거동을 정확하게 파악하기 위하여 정재하시험이 수행되는 지반에서 시추조사, 현장원위치시험 등을 통해 지반특성을 확인하였고, 실규모 정재하시험을 수행하여 말뚝의 거동특성을 분석하였다. 정재하시험이 수행된 방식과 동일하게 수치해석을 모사하여 재하시험과 동일한 하중단계에서 말뚝의 거동을 수치해석으로 모사하여 현장시험 결과와 비교함으로써 수치해석 기법의 신뢰성을 검증하였다.

Keywords

References

  1. Choi, Y. K., O'Neill, M. W., Nam, M. S. and Chung, C. K. (2002), Pullout behaviors for battered large diameter reaction piles during static pile load tests for large diameter piles, International Deep Foundations Congress 2002 : An International Perspective on Theory, Design, Construction, and Performance, pp. 793-806.
  2. Kim, H. T., Lee, M. J., Park, J. W., Yoon, S. J. and Han, Y. J. (2011), Verification of applicability of hybrid CFFT pile for numerical analysis, Journal of Korean Geo-Environmental Society Vol. 12, No. 8, pp. 59-67 (in Korean).
  3. Kim, J. H. and Yea, G. (2013), Case study of comparative analysis between static and dynamic loading test of PHC pile, Journal of Korean Geo-Environmental Society, Vol. 14, No. 11, pp. 13-23 (in Korean). https://doi.org/10.14481/jkges.2013.14.12.013
  4. Lee, J. M., Lee, J. H. and Lee, Y. J. (2012), Pile behaviour on interface properties-comparison between field pile-load test and numerical analysis, Annual Conference of Korean Society of Civil Engineers, pp. 1074-1077 (in Korean).
  5. Muhannad, T. S., Anne, R., Timothy, W. P., William, J. K III. and Mary, R. (2010), Measured soil-pile interaction pressures for small-diameter laterally loaded pile in loose sand, GeoFlorida 2010: Advances in Analysis, Modeling & Design, pp. 1498-1506.
  6. Nam, H. S. (2015), A study on the irrigation facility rehabilitating direction and KRC guideline and standard establishment, Research Report, Rural Research Institute Korea Rural Community Corporation, pp. 98-100 (in Korean).
  7. Serhii, L. and Evhen, Z. (2012), Plaxis simulation of static pile tests and determination of reaction piles influence, Scientific and Technical Journal: New Technologies in Construction, NDIBV, Kyiv, 23-24(1-2), pp. 68-73.