• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.52-52
• /
• 2020

영상을 이용하여 하천유속과 유량을 측정하는 방법은 신속하고 간결하게 유속을 측정할 수 있는 방법으로 주목을 받고 있다. 또한 새로운 기술인 드론을 활용하여 하천의 유속과 유량을 측정하는 방법도 다양하게 시도되고 있다. 본 연구는 드론을 정지영상과 동영상을 이용하여 별도의 측량이나 복잡한 과정없이도 하천의 유속분포를 추정할 수 있는 방안을 제시하였다. 이 때, 중소하천의 유속 측정에 보다 쉽게 활용할 수 있도록 카메라 보정을 통한 카메라 내부변수 획득과 정지영상에 수록된 드론의 위치와 자세에 대한 EXIF 자료를 이용하는 방안, 약간의 흔들림이 있는 영상에서도 유속을 추정하는 방안을 제안하였다. 먼저, 드론의 카메라 보정을 위한 프로그램을 작성하고, 카메라의 내부 변수를 추정하였다. 드론의 위치와 자세에 대한 정보는 정지영상(JPG 파일)에 수록된 EXIF 정보를 이용하여 드론의 위치(GPS)와 자세(자이로스코프)를 알아내었다. 이를 이용하여 현장의 참조점에 대한 위치 정보를 확인하고, 또 수면촬영을 위한 정지비행시의 카메라의 대략의 위치와 자세 정보를 확인하였다. 이 자료들은 실제 유속측정에 이용하는 동영상에서 나타나는 참조점의 위치 정보를 결정하기 위한 것이다. 그리고 연이어 촬영된 동영상에서 시공간영상분석법으로 측정 단면의 유속분포를 분석하였다. 이 때, 동영상 내에 있는 약간의 흔들림은 FFT 분석으로 적절히 보완할 수 있다. 개발된 방법을 밀양강의 단장천 대리 수위표 지점 인근에서 시험한 결과 기존의 유속계로 측정한 방법과 상당히 근사한 결과를 얻을 수 있었다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.1
• /
• pp.70-79
• /
• 2024

This paper describes the results of the development of the the unmanned aerial vehicle system integration laboratory(UAV SIL) for the integrated verification. This UAV SIL is designed to test the robustness of the UAV system including the operational logics and the flight control system behaviors under many abnormal and emergency conditions such as data-link losses, airborne subsystem failures, engine shut down conditions, and ground control station faults. This paper presents how to build the UAV SIL and how to verify the in-development UAV system through the UAV SIL.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.2
• /
• pp.127-134
• /
• 2020

High supersonic aircraft are exposed to high temperature environments by aerodynamic heating during supersonic flight. Thermal protection system structures such as double-panel structures are used on the skin of the fuselage and wings to prevent the transfer of high heat into the interior of an aircraft. The thin-walled double-panel skin can be exposed to acoustic loads by supersonic aircraft's high power engine noise and jet flow noise, which can cause sonic fatigue damage. Therefore, it is necessary to examine the behavior of supersonic aircraft skin structure under thermal-acoustic load and to predict fatigue life. In this paper, we designed and fabricated thermal-acoustic test equipment to simulate thermal-acoustic load. Thermal-acoustic testing of the titanium specimen under thermal-acoustic load was performed. The analytical model was verified by comparing the thermal-acoustic test results with the finite element analysis results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1085-1097
• /
• 2009

We present a structure and design method of the D8PSK modem compatible with the VDL mode-2 standard and performance test results of the developed modem. In VDL mode-2, the raised cosine filter is used only in the transmitter and a general low pass filter is used in the receiver. Consequently, we can not achieve ISI reduction but can have better spectrum characteristics. Although there is 1~2 dB performance degradation with an un-matched filter compared to that with a matched filter, it is more important to minimize adjacent channel interference in narrow band communications. The transmit signal is generated digitally to avoid the problems(I/Q imbalance and DC offset etc.) of analog modulators. In addition the digital down converter using digital IF sampling technique is adopted for the receiver. This paper contains the overall configuration, design method and simulation results based in part on the previously proposed structures and algorithms. It is confirmed that the modem transmits and receives messages successfully at a speed of max. 870 km/h over ranges of up to 310 km through the ground and in-flight communication tests.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.6
• /
• pp.545-557
• /
• 2017

The study is about the efficient alternative to concrete surface in the field of visual inspection technology for deteriorated infrastructure. By combining industrial drones and deep learning based image analysis techniques with traditional visual inspection and research, we tried to reduce manpowers, time requirements and costs, and to overcome the height and dome structures. On board device mounted on drones is consisting of a high resolution camera for detecting cracks of more than 0.3 mm, a lidar sensor and a embeded image processor module. It was mounted on an industrial drones, took sample images of damage from the site specimen through automatic flight navigation. In addition, the damege parts of the site specimen was used to measure not only the width and length of cracks but white rust also, and tried up compare them with the final image analysis detected results. Using the image analysis techniques, the damages of 54ea sample images were analyzed by the segmentation - feature extraction - decision making process, and extracted the analysis parameters using supervised mode of the deep learning platform. The image analysis of newly added non-supervised 60ea image samples was performed based on the extracted parameters. The result presented in 90.5 % of the damage detection rate.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.2
• /
• pp.131-138
• /
• 2013

The precision aerial application of small farms, such as paddy, upland and orchard fields using agricultural unmanned helicopters became a new paradigm. The objective of this study was to evaluate the performance of a GPS module and algorithm, controlling drift of agricultural helicopter by the crosswind and maintaining the position for emergency landing. Purpose of the drift control, of which an algorithm works while hovering is related with the emergency sequence that coping with abnormal conditions of rotorcraft system. However, the inertial attitude control cannot detect a drifting motion of fuselage moving at the constant velocity, thus the crosswind takes the helicopter away from the landing position. Performance of the drift control module, based on the GPS that a hovering position did not deviate within 5m in diameter, were tested and evaluated. Initially, the reaction against a disturbing gust wind was sensitive, soon the helicopter maintained its locking position and azimuth within 5m in diameter. It was, however, difficult for the helicopter to recognize the swaying and nodding, the some deviation was expected due to the discrepancy characteristics of the GPS signal. The performance of the drift control proved the effectiveness of the module to maintain the position against an unintended drift during the emergency landing or hovering.

• Journal of Broadcast Engineering
• /
• v.19 no.3
• /
• pp.372-384
• /
• 2014

DTV field tests have been performed to measure field strength and to check reception ratio on indoor and outdoor sites. They use an antenna of 9m to measure DTV signal in case of outdoor measurement on the road. Modern skyscrapers require the analysis of vertical-directional wave propagation by measuring vertical-directional DTV signal. Even if the field strength is above the reception threshold of $43dB{\mu}V/m$, the reception is impossible in case of strong multi-path or high impulse noise. So, vertical-directional field measurement is essential in environment of tall buildings. In this paper, we developed an octo type multi-copter to measure vertical-directional DTV signal level. A compact and portable DTV signal level meter, an antenna, a microwave transmitter for data transmission, and a recording equipment are equipped in the multi-copter. Three different sites are selected to test the measurement system. Developed measurement system using the multi-copter is very useful in measuring vertical-directional DTV signal, especially in apartments, non-accessible area by vehicles, and forbidden areas.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.1
• /
• pp.18-31
• /
• 2018

Rotorcrafts have more severe crashworthiness conditions than fixed wing aircraft owing to VTOL and hovering. Recently, with the increasing demand for highly efficient transportation system, application of composite materials to aircraft structures is increasing. However, due to the characteristics of composite materials that are susceptible to impact and crash, demand to prove the crashworthiness of composite structures is also increasing. The purpose of present study is to derive the structural concept of composite subfloor for rotorcrafts and verify it. In order to design a crashworthy composite subfloor, the conceptual design of the testbed helicopter for the demonstration and the derivation of energy absorbing requirement were carried out, and the composite energy absorber was designed and verified. Finally, the testbed for the demonstration of a crashworthy composite structure was fabricated, and performed free drop test. It was confirmed that the test results meet the criteria for ensuring occupant survivability.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.8
• /
• pp.597-609
• /
• 2020

These days, the coaxial rotor system is used for various purposes like UAVs, Mars exploration helicopters, and the next-generation high-speed rotorcraft. A number of research projects on aerodynamic performance of rotor systems, including the coaxial configuration have been made previously. On the contrary, research on rotor blade deformation has been mainly carried out regarding the single rotor system, where such effort has not been enough on the coaxial system. Nonetheless, in case of the coaxial system, blade deformation analysis is much more important because of the complex air flow around the rotors, and that the distance between the two rotors is a key factor affects aerodynamic performance of the entire system. For these reasons, an experimental study on rotor blade deformation of the coaxial system was conducted using the Stereo Pattern Recognition(SPR) technique, one of the state-of-the-art of photogrammetry method. In this research, a small-scale coaxial rotor test stand designed by Korea Aerospace Research Institute(KARI) was used. With the same test stand, performance of the coaxial configuration had been studied before the experimental study on blade deformation, in order to find the relation between performance and blade deformation of the rotor system. Results of the performance test and the deformation study are presented in this article.

• The Korean Journal of Air & Space Law and Policy
• /
• v.26 no.1
• /
• pp.215-239
• /
• 2011

We are now entering the era of Commercial Space Transportation with the rapid commercialization of space. Commercial Space Tourism will be realized first of all in the commercial space transportation and the spacecraft is developing for it led by private enterprise such as Virgin Galatic and XCOR Aerospace. The spacecraft for space tourism is developed as Reusable Launch Vehicle(RLV). RLV Spaceship I & II manufactured by the Scaled Composites for Virgin Galatic had completed experimental flight successfully and is going to put to the operation for space travel around the year 2012. In our country, Yecheon Astro-Space Center located in Yecheon, Kyungbuk Province, signed a binding-MOU with XCOR Aerospace and going to start space travel in the year 2013 with the spacecraft LYNX MARK-II. Thus, now space travel has become a reality to us. But it is also reality that there's no study by legal basis preparing for the space tourism domestically and internationally. In this regards, this thesis dealt with legal issues related to space tourism. These are as follows : (1) the applicabe law issue that is which law between air law and space law will apply, (2) the status of space tourist issue that is space tourist can be considered as personnel of a spacecraft and/or space flight participant and has the duty to obey the order of the captain of spacecraft, (3) the responsibility of the government for the non-governmental entities such as private enterprise which involved in space tourism in case space accident occurs during the space travel, (4) license permit and supervision issue by the government (In this point, for activating the market of the space tourism, I think it is essential to guarantee the safety of the spacecraft by the government authority, though U. S. government declared that it has not certified the launch vehicle as safe for carrying crew or space flight participants), (5) registration issue, (6) space insurance issue. For all the issues mentioned above, I have studied the existing international treaties and several country's domestic law to the space by referring U.S's Commercial Space Launch Amendment Act of 2004 and New IGA of 1998 and concluded that uniform legal regime to govern these issues should be established domestically and internationally in the near future.