• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1000-1005
• /
• 2010

국내에 대표적인 표면파 탐사법인 MASW, SASW, HWAW를 비교한 결과에 따르면, 세기법들의 결과가 매우 유사하게 도출되는 것을 확인할 수 있었으나, 각 현장별로 획득한 탐사심도의 차이가 존재하였다. 넓은 시험 측선을 필요로 하는 SASW 및 MASW 기법의 경우 현장 상황 및 조건에 따라 15m 정도의 얕은 심도의 물성만을 획득하였다. 표면파 기법은 토사층에서는 매우 신뢰성있는 결과를 도출하였으며 2차원 영상화를 통한 넓은 영역의 물성치를 빠르고 경제적으로 획득할 수 있는 장점이 있다. 현재 지반조사 시 소수의 시추자료를 이용하여 부지의 특성을 파악하기 때문에 시추공간 물성치 및 지반구조에 대해서 확실한 파악이 이뤄지지 않고 있기 때문에 표면파 기법은 토사층의 물성산출 뿐만 아니라 시추공탐사법을 보완하여 시추공간 물성변화를 파악하는 유용한 시험법이라고 판단된다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.258-262
• /
• 2003

연안지역에서 해수침투대의 평가를 위하여 다양한 물리검층을 수행하였다. 특히, 해수침투대의 정량적인 평가에 활용될 수 있는 지층의 공극측정은 매우 어려운 문제중의 하나이다. 연안지역의 경우, 미고결지층에 대한 불교란 시료 채취가 어렵고 대부분의 관측정은 시추공 붕락방지를 위하여 내경 50mm 의 PVC 케이싱을 설치하는 경우가 많기 때문에 공극의 측정은 현실적으로 많은 어려움이 따른다. 본 연구에서는 전남 영광지역에서 각종 조사목적으로 굴착한 시추공에서 다양한 물리검층을 수행하여 공내수의 높은 전기전도도가 기원하는 지층을 확인하고자 하였다. 전자유도검층과 공극검층을 수행한 시추공(YK-4호공)에 대한 해석결과, 공내수의 높은 전기전도도는 물리검층법으로 추정한 사질층 공극수와 비슷한 범위를 보였다. 물리검층법으로 추정한 공극이나 높은 염수를 보이는 구간에 대한 해석결과는 보완해야할 많은 부분이 있지만 제한된 현장 상황에서 조사결과의 불화실성을 줄이는데 많은 기여를 할 것으로 기대된다.

• Journal of the Korean earth science society
• /
• v.22 no.3
• /
• pp.179-185
• /
• 2001

Borehole tests are commonly used as a tool to obtain the physical properties of soils and rocks. The results of borehole tests are, however, discontinuous. Interpolation methods are applied to interpret the data gap between the borehole test points. The interpolation is valid only if the horizontal variations of the ground between the test points are small enough to ignore. A surface wave inversion method was used to study the S wave velocity of the very soft soil to provide the continuous 2 dimensional S wave velocity structure. The resolution of the S wave velocity structure was used to interpret the inversion results.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.10
• /
• pp.49-60
• /
• 2022

Underground urbanization appears to be a promising solution in response to the shortage of construction sites in the above-ground space. In this context, an accurate evaluation of a construction site ensures the long-term performance of geosystems. This study characterizes potential sites for complex plants built in underground space using geophysical methods (i.e., seismic refraction exploration and electrical resistivity survey) and in situ tests (i.e., standard penetration tests (SPTs) and downhole tests). SPTs are conducted in nine boreholes BH-1-BH-9 to estimate the groundwater level and vertical distribution of geological structures. The seismic refraction method enables us to obtain the elastic wave velocity and thickness of each soil layer for each cross-sectional area. An electrical resistivity survey conducted using the dipole array method provides the electrical resistivity profiles of the cross-sectional area. Data obtained using geophysical techniques are used to assess the classification of the soil layer and bedrock, particularly the fracture zone. This study suggests that geotechnical information using in situ tests and geophysical methods are useful references to design an underground complex plant construction.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.7
• /
• pp.11-20
• /
• 2022

Planetary geotechnical investigation in charge of drilling and soil sampling is of a great importance in providing extraterrestrial geotechnical information. Extraterrestrial subsurface investigation, which includes drilling, soil sampling, and sample transportation, will be loaded in a lander or a rover. Scientists from all over the world are interested in the design and development of a drilling system with various functions due to potential applications in planetary surface exploration mission. However, it is difficult to build a fully functional drilling system in extreme environment conditions. This paper presents engineering considerations for the design and development of soil sampling including drilling and performance verification in extreme environment conditions in detail.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.92-116
• /
• 1999

Tomographic approaches to image underground structure using electrical properties, can be divided into DC resistivity, electromagnetic, and radar tomography, based on the operating frequency. DC resistivity and radar tomography methods have been recently applied to site investigation for engineering purpose in Korea. This paper review these two tomography methods, through the case histories acquired in Korea. As another method of borehole radar survey, borehole radar reflection method is included, and its inherent problem and solution are discussed, how to find the azimuth angle of reflector using direction-finding-antenna. Since the velocity anisotropy of radar wave has been commonly encountered in field data, anisotropic radar tomography is discussed in this paper. In DC resistivity tomography, two subjects are focussed, electrode arrays, and borehole effect owing to the conductive fluid in borehole. Using the numerical modeling data, various kinds of electrode ways are compared, and borehole effect is illustrated. Most of the case histories presented in this paper are compared with known geology, core logging data, and/or Televiewer images.

• The Journal of Engineering Geology
• /
• v.7 no.3
• /
• pp.161-171
• /
• 1997

The exact information on geological structures and characteristics of the subsurface must be acquired to secure quality and safety of constructions. GPR technique, one of the most updated geophysical methods, is known for its applicability to shallow-depth underground surveys. The purpose of this study is to examine the usefulness of GPR method in constructions for detailed subsurface investigations, especially detecting the boundary between basement rock and its overburden. To find appropriate depths of the geological boundaries, it is necessary to obtain velocity of electromagnetic wave propagating into the ground. Wave velocity 0.096 m/ns estimated from velocity analysis using CMP gathers is used for depth conversion from time section. The depths of geological boundaries from GPR profiles are very well correlated with boring data. In addition, GPR survey has found some undulations of the geological boundaries due to weathering, which cannot be provided by conventional coring approaches.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.202-216
• /
• 1999

The deep foundation is frequently used for the infrastructures. Since the quality control of the cast-in-place concrete foundations such as CIP piles and slurry walls is not so easy as that of the ready made PC(prestressed concrete) piles, it is necessary to get the information on the integrity of the concrete of the foundation. The depth estimation of foundations whose depths are unknown is also very important in repair and reinforcement works or in safety inspection and assessment to the big structures. The cross-hole sonic logging(CSL) system and the single channel reflection seismic measurement system were developed to test the integrity of pile. The former is well applied to CIP structures, while the later to all kinds of piles with less accurate result compared to that of CSL. To estimate the depth of the deep foundations, parallel seismics, borehole RADAR, and borehole magnetics can be used.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.263-266
• /
• 2003

균열암반내의 수리적 유동 특성을 파악하기 위하여 다양한 물리검층을 수행하였다. 물리검층법은 시추공 주변 지층이나 공내수의 물리적 또는 유동 특성의 연속적인 측정이 가능한 장점을 지니고 있어 최근 지하수 조사나 환경오염 분야에 활용이 점점 증가하는 추세이다. 본 연구는 균열 암반내에서 지하수의 유동 특성 파악에 효과적인 Heat-pulse type의 유향ㆍ유속검층을 이용하여 시추공과 교차하는 파쇄대의 수리적인 연결 특성을 파악하였다. 특히, 양수를 병행하면서 취득한 유향ㆍ유속검층 자료는 시추공내로 지하수가 유입 또는 유출되는 구간을 정확하게 파악할 수 있었다. 이들 결과는 지하수 수치모델 설정, 각종 공내 수리시험 등에 중요한 정보를 제공할 수 있을 것으로 기대된다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.11a
• /
• pp.91-118
• /
• 1999