• Explosives and Blasting
• /
• v.34 no.4
• /
• pp.10-18
• /
• 2016

Explosive blasting utilizes the energy produced from the explosion of explosive materials. Since the black powder, the first type of explosive, was invented, various types of explosives have been developed until a recent emulsion explosive which is powerful as well as safe in use. The detonators continue to be developed from safety fuse to the recent electronic detonators which allow extremely accurate and flexible control of delay time. However, the good explosives and detonators do not always lead to the good blast results. It entirely depends on the blast engineer. It is necessary to develop the empirical or theoretical models based on the field experience and sound theoretical algorithm. Such models would be very useful for blast design and, furthermore, provide the idea of further technical development. This paper introduces some models used in explosive blasting and attention to be paid for field application.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.75-85
• /
• 2013

To acquire depth information using stereo vision, it is required to find correspondence points between stereo image pair. Conventional stereo vision systems usually use two cameras to get disparity data. Therefore, conventional stereo matching methods cannot resolve the tradeoff problem between accuracy and precision with respect to the length of baseline. Besides, belief propagation method, which is being used recently, has a problem that matching performance is dependent on the fixed weight parameter ${\lambda}$. In this paper, we propose a modified belief propagation stereo matching technique based on multi-baseline stereo vision to solve the tradeoff problem. The proposed method calculates EMAD(extended mean of absolute differences) as local evidence. And proposed method decides weight parameter ${\lambda}$ adaptively to local texture information. The proposed method shows higher initial matching performance than conventional methods and reached optimum solution in less iteration. The matching performance is increased about 4.85 dB in PSNR.

• Explosives and Blasting
• /
• v.35 no.4
• /
• pp.36-47
• /
• 2017

Due to civil complaints on vibrations and noises arising from blasting, mechanical excavation has been widely used for tunneling rather than the method of blasting, especially in the case of being in a close-proximity of 10M-20M range to a safety-thing. However, mechanical excavation, though less, it does increase the cost of whole construction project as the period of excavation is much prolonged from lack of constructability. This study aims to research and develop an effective blasting method that can ensure the constructability of shortened excavation period whilst not compromising the safety of the safety-things in a proximity to the blasting site by using a combination of an electronic detonator that can accurately control its delay period and a Low Vibration Explosives(LoVEX) that is effective on vibration control.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.2
• /
• pp.46-55
• /
• 2016

The kinetic analysis of a heavily aluminized cyclotrimethylene-trinitramine(RDX) is conducted using differential scanning calorimetry(DSC), and the Friedman isoconversional method is applied to the DSC experimental data. The pre-exponential factor and activation energy are extracted as a function of the product mass fraction. The extracted kinetic scheme does not assume multiple chemical steps to describe the complex response of energetic materials; instead, a set of multiple Arrhenius factors is constructed based on the local progress of the exothermic reaction. The resulting reaction kinetic scheme is applied to two thermal decomposition tests for validating the reactive flow response of a heavily aluminized RDX. The results support applicability of the present model to practical thermal explosion systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.1141-1144
• /
• 2005

In this paper, we propose an automatic displacement system for testing stability of structure. Photogrammetry is a method which can measure accurate 3D data from 2D images taken from different locations and which is suitable for analyzing and measuring the displacement of structure. This paper consists of camera calibration, feature extraction using coded target & retro-reflective circle, 3D reconstruction and analyzing accuracy. Multi-view camera which is used for measuring displacement of structure is placed with different location respectively. Camera calibration calculates trifocal tensor from corresponding points in images, from which Euclidean camera is calculated. Especially, in a step of feature extraction, we utilize sub-pixel method and pattern recognition in order to measure the accurate 3D locations. Scale bar is used as reference to measure. the accurate value of world coordinate..

• Explosives and Blasting
• /
• v.39 no.3
• /
• pp.24-34
• /
• 2021

Electronic detonators are widely used in various construction sites due to accurate delay time. Including the cases with exceeded noise and vibration from site using electric/non-electric detonator, electronic detonators are used to improve blast fragmentation or to reduce the cost of secondary partial blasting. Furthermore, the number of cases using electronic detonators are increased for reduction of the cost and construction period by maximizing operations efficiency. This case study is about applying electronic detonators on large section station, tunnel construction site which is the part of urban area GTX A project. Although it was initially planned to utilize non-electric detonators, damage was inflicted on safety-thing. We have considered blasting method using electronic detonators as solution of this problem. By applying electronic detonators, we not only satisfied environmental regulations but also prevented nearby safety-thing from getting damaged. In addition, we were able to shorten the construction period than the initial plan by conducting single simultaneous blasting on large section station, in order to ensure safe and efficient construction.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.4
• /
• pp.267-277
• /
• 2019

Photogrammetry and computer vision are identical in determining the three-dimensional coordinates of images taken with a camera, but the two fields are not directly compatible with each other due to differences in camera lens distortion modeling methods and camera coordinate systems. In general, data processing of drone images is performed by bundle block adjustments using computer vision-based software, and then the plotting of the image is performed by photogrammetry-based software for mapping. In this case, we are faced with the problem of converting the model of camera lens distortions into the formula used in photogrammetry. Therefore, this study described the differences between the coordinate systems and lens distortion models used in photogrammetry and computer vision, and proposed a methodology for converting them. In order to verify the conversion formula of the camera lens distortion models, first, lens distortions were added to the virtual coordinates without lens distortions by using the computer vision-based lens distortion models. Then, the distortion coefficients were determined using photogrammetry-based lens distortion models, and the lens distortions were removed from the photo coordinates and compared with the virtual coordinates without the original distortions. The results showed that the root mean square distance was good within 0.5 pixels. In addition, epipolar images were generated to determine the accuracy by applying lens distortion coefficients for photogrammetry. The calculated root mean square error of y-parallax was found to be within 0.3 pixels.

• Economic Analysis
• /
• v.27 no.4
• /
• pp.1-42
• /
• 2021

The outlook for Korea's consumer price inflation rate has a profound impact not only on the Bank of Korea's operation of the inflation target system but also on the overall economy, including the bond market and private consumption and investment. This study presents the prediction results of consumer price inflation in Korea for the next three years. To this end, first, model selection is performed based on the out-of-sample predictive power of autoregressive distributed lag (ADL) models, AR models, small-scale vector autoregressive (VAR) models, and large-scale VAR models. Since there are many potential predictors of inflation, a Bayesian variable selection technique was introduced for 12 macro variables, and a precise tuning process was performed to improve predictive power. In the case of the VAR model, the Minnesota prior distribution was applied to solve the dimensional curse problem. Looking at the results of long-term and short-term out-of-sample predictions for the last five years, the ADL model was generally superior to other competing models in both point and distribution prediction. As a result of forecasting through the combination of predictions from the above models, the inflation rate is expected to maintain the current level of around 2% until the second half of 2022, and is expected to drop to around 1% from the first half of 2023.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.1
• /
• pp.52-71
• /
• 2011

This study was initiated with the intent to consider the features of Gugokwonlim and to compare Gabsagugok(甲寺九曲) to Yongsangugok(龍山九曲) against the backdrop of Mt. Gyeryong by revealing their nature and confirming the names and exact locations. A literature review, interviews with local people and field studies confirmed that Gabsagugok and Yongsangugok are each composed of 9 seasonal features. The former is made up of Yongyuso(龍遊沼) - Iilcheon(二一川) - Baengnyonggang(白龍岡) - Dalmuntaek(達門澤) - Geumgyeam(金鷄?) - Myeongwoldam(明月潭) - Gyemyeongam(鷄鳴巖) - Yongmunpok(龍門瀑) - Sujeongbong(水晶峰) while the latter is made up of Simyongmun(尋龍門) - Eunnyongdam(隱龍潭) - Waryonggang(臥龍剛) - Yuryongdae(遊龍臺) - Hwangnyongam(黃龍岩) - Hyeollyongso(見龍沼) - Ullyongtaek(雲龍澤) - Biryongchu(飛龍湫) - Sillyongyeon(神龍淵). Both Gabsagugok and Yongsangugok are part of Gugokwonlim built in the valleys of Mt. Gyeryong in the late Joseon Dynasty by Byeoksu Yun Deok-yeong (1927) and Chwieum Gwon Jun-myeon (1932), respectively, with a 5 year difference. Gabsagugok was supposedly designed to reflect an individual taste for the arts and to admire principles of Juyeok (ch. Zhouyi) and the beauty of nature. On the contrary, Yongsangugok appears to be the builder's expression of his longing for independence day, likened to the life of a dragon after receiving the sad news of Japan's annexation of Korea. Such differences show that these two builders had very different intentions from one another. The letters of Gabsagugok have a semi cursive style and were deeply engraved on the rock in a square shape. Consequently they have not been worn away except for those in Yongyuso, the first Gok. In contrast, the letters in Yongsangugok have an antiquated, cursive-Yija style but because they were engraved relatively lightly, serious wear and damage occurred. In terms of location, Gabsagugok was built around Ganseongjang adjacent to the 5th Gok while Yongsangugok was set up around the 5th Gok, Hwangnyongam. Meanwhile, the important motif which forms the background of Gabsagugok seemingly highlights the geographic identity of Mt. Gyeryong using the dragon and the chicken as themes. It also appears to symbolize the principles of Juyeok focusing on Kan of the Eight Trigrams for divination; this requires an in-depth study for confirmation. The main motif and theme of Yongsangugok is the dragon. It infuses the builder's intentions in Sangsinri Valley by communicating with nature through a story of a dragon's life from birth to ascension. It is assumed that he tried to use this story to express his hope for restoring the national spirit and reconstructing the country.