• Horticultural Science & Technology
• /
• v.33 no.5
• /
• pp.697-704
• /
• 2015

This study was carried out to investigate conveyance environment during shipping export to Japan and the optimum pre-treatment of cut Dendranthema grandiflorum 'Baekma'. Shipping from Korea to Japan, which usually takes three to five days, requires keeping the flower at the ideal temperature. When inspection took place in Japan, the ideal temperature was lost and deterioration began. Once the ideal temperature is lost, deterioration takes place. The results of this work showed that vase life was extended by treatment Chrysal RVB and NaOCl compared to the control (distilled water), and Chrysal RVB was used to maintain the flower from bud to full bloom. Bacterial growth was not observed after pretreatment with NaOCl or $ClO_2$. However, $ClO_2$ pre-treatment was observed to affect the early growth period of the bacteria. The chlorophyll content was the highest after Chrysal RVB or NaOCl pretreatment compared to the other treatments. Therefore, these results support pretreatment with NaOCl and Chrysal RVB of Dendranthema grandiflorum 'Baekma' for export to Japan.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.263-268
• /
• 2014

This research was performed to investigate the effect of light source and light quality in night break treatment on the growth and flowering of standard chrysanthemum. It was processed 4 hours (22:00-02:00) night break using LED 590, 610, 630, 660, 680nm and fluorescent lamp (mixed light of 480+540+610nm) in standard chrysanthemum 'Baekma' and 'Jinba' for 40 days from transplanting. The days to flower budding from short-day treatment of 'Baekma' were the longgest at fluorescent treatment (21.3 days) and were the shorttest at LED 590nm treatment (15.8 days) among all treatments. The days to flower budding from short-day treatment of 'Jinba' was longger with 18.0 days, 17.8 days, and 17.7 days at the fluorescent, LED 610nm, and 660nm treatments. And it was the shortest with 15.1 days in LED 590nm treatment. Similarly, the days to flowering from short-day treatment of 'Baekma' was the longgest with 56.9 days at fluorescent treatment, and was the shorttest in 51.6 days about LED 590 nm treatment. The days to flowering from short-day treatment of 'Jinba' was longer at fluorescent (56.0 days) and LED 660nm (56.7 days) treatments and was shortest at LED 590nm (52.9 days) among all treatments. Therefore, inhibition of flower bud initiation and flowering were the most effective under fluorescent treatment in case of 'Baekma', and fluorescent and LED 660nm treatments in case of 'Jinba'. The length and weight of cut flower of 'Baekma' and 'Jinba' were most excellent in fluorescent treatment in which the floral differentiation suppression effect was the best. Consequently, as to the growth and flowering of standard chrysanthemum, the treatment which was suitable as the light source and light quality for night break is regarded as the fluorescent lamp, and also under LED 660nm up to a certain level.

• Korean Journal of Plant Resources
• /
• v.25 no.1
• /
• pp.156-168
• /
• 2012

Chrysanthemum is a cut flower species that normally lasts for 1 to 2 weeks, in some cases 3-4 weeks. This has been attributed to low ethylene production during senescence. Reduction in cut flower quality has been attributed to the formation of air embolisms that partially or completely blocks the water transport from the vase solution to the rest of the cut flower stem, increasing hydraulic resistance which may cause severe water stress, yellowing, wilting of leaf, and chlorophyll degradation. Standard type chrysanthemum can be harvested when buds were still tightly closed and then fully opened with the simple bud-opening solution. Standard type chrysanthemum can also be harvested when the minimum size of the inflorescence is about 5-6 cm bud which opened into the first flower full-sized flower. While spray varieties can be harvested when 2-4 most mature flowers have opened (40% opening). Cut flowers are sorted by stem length, weight, condition, and so on. Standard chrysanthemum is 80 cm length for standard type and 70cm for spray type. Pre-treatment with a STS, plant regulator such as GA, BA, 1-MCP, chrysal, germicide, and sucrose, significantly improved the vase life and quality of cut flowers. It is well established that vase solutions containing sugar can improve the vase life of cut chrysanthemum. Chrysanthemum is normally packed in standard horizontal fiberboard boxes. Chrysanthemum should normally be stored at $5{\sim}7^{\circ}C$. Precooling resulted in reduction in respiration, decomposition, and transpiration activities as well as decoloration retardation. There was significant difference between "wet" storage in 3 weeks and "dry" storage in 2 weeks. In separate pulsing solution trials, various germicides were tested, as well as PGRs to maintain the green color of leaves and turgidity. Prolonging vase life was attained with the application of optimal solution such as HQS, $AgNO_3$, GA, BA and sucrose. This also retarded senescence in leaves of cut flower stems. Fresh cut chrysanthemum can be transported using a refrigerated van with $5{\sim}7^{\circ}C$. Increasing consumption and usage of cut chrysanthemum of various cultivars would require efficient transport system, and effective information exchange among producer, wholesaler, and consumer.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.1
• /
• pp.131-142
• /
• 2020

Chrysnathemum stunt viroid (CSVd), a small, single-stranded, infectious RNA, has caused a severe problem in chrysanthemum in the world. In Korea, since CSVd was firstly observed in 1997, the disease has been spread throughout the whole country rapidly. In spite of the seriousness, few methods for control of CSVd have been known without prevention. The use of resistant cultivars is one of the most efficient approaches for overcoming CSVd disease in chrysanthemum cultivation. This study was carried out to identify chrysanthemum genetic resources for the resistance to chrysanthemum stunt viroid (CSVd). A total of 192 commercial cultivars including 167 spray and 25 standard chrysanthemum were screened with CSVd through grafting inoculation method. In most of the inoculated cultivars, typical disease symptoms, stunting of plant height, reduced flower size, and flower color bleaching, were induced. Several cultivars, however, were symptomless or showed delay in symptom expression. Of 192 chrysanthemum cultivars, two cultivars with less than 5% of the average reduction rate of plant height, 'Chiwerel' and 'Jeongheungdaesin', were rated as resistant. And six cultivars less than 20% inculding 'Inga' were rated as moderate resistant. The remaining 184 cultivars with a high level of reduction were rated as susceptible. We expect that these genetic resources can be used in crossbreeding programs for developing CSVd resistant cultivars of chrysanthemum.

• Horticultural Science & Technology
• /
• v.29 no.6
• /
• pp.539-548
• /
• 2011

This study was conducted to control unseasonable flowering in a standard chrysanthemum 'Baekma' bred in Korea by 2-chloroethylphosphonic acid (ethephon) and night temperature (NT) through suppression of the transition from a vegetative to a reproductive stage under long day length caused by high NT in summer season. Ethephon was applied either once or twice at a concentration of 0, 200, 400, or $800mg{\cdot}L^{-1}$. The NT within controlled mini-plastic houses was maintained at 13, 17, or $21^{\circ}C$. The NT at $13^{\circ}C$ showed the greatest inhibiting effect of unseasonable flowering among all NTs regardless of various combinations of ethephon concentration and frequency. Moreover, the inhibition tendency of unseasonable flowering was distinctly decreased in a NT-dependant manner. Higher NTs reduced cut flower length and number of leaves, but increased the number of young leaves attached to top part of the flower. Higher ethephon concentrations and lower NTs increased cut flower length and the fresh weight of total, stem, and leaves due to the extension of vegetative growth period. Thus, if it is difficult to control the NT below $21^{\circ}C$ in greenhouses in the summer season, we recommended to spray more than $200mg{\cdot}L^{-1}$ ethephon once after planting to suppress unseasonable flowering and to ensure sufficient length of cut flowers.

• FLOWER RESEARCH JOURNAL
• /
• v.26 no.4
• /
• pp.187-194
• /
• 2018

This study was conducted to investigate the facilities, cultivation, postharvest management, and distribution status of 27 cut chrysanthemum farms in Korea. The 60% of farms have cultivated the cut chrysanthemum using soil fertigation system in the PE plastic house. In Jeonnam and Busan provinces, Standard type of chrysanthemum was cultivated mainly than spray type of chrysanthemumJeoas. Most farms have been producing the rooted cuttings by plug system using cuttings self-propagated or purchased from the company, but farms in Jeonnam have been planting cuttings directly on cultivation bed. And the 66.6% of cut chrysanthemum farms have been pretreating with dipping in hot water or tap water after harvesting. Precooling was not performed on 70.4% of the farms, and precooling farms have been mainly conducted at temperature of $2-4^{\circ}C$. After harvesting, 70.4% of the farms stored the cut flowers at $2-4^{\circ}C$ for more than 48 hours to control the distribution volume. Cut chrysanthemum was graded mainly by individuals before distribution, and some export farmers have been conducting the cooperative grading. In distribution, all farms have distributed the cut flowers to the domestic markets, and 44.4% of these farms have been also exporting. The 63.0% of farms distributed to domestic market have been trading with flower auction sites.

• Horticultural Science & Technology
• /
• v.33 no.6
• /
• pp.947-954
• /
• 2015

To select suitable spray chrysanthemum cultivars for Agrobacterium-mediated transformation, thirty-nine (39) spray cultivars bred in the National Institutes of Korea and a standard cultivar Jinba from Japan were collected and tested for regeneration rate and Agrobacterium infection assays. MS medium with $0.5mg{\cdot}L^{-1}$ IAA and $1.0mg{\cdot}L^{-1}$ BAP was used for shoot regeneration from leaf disks and internodes. The shoot regeneration rate in leaf disks was the highest in cultivar BRM, followed by cultivars VS, WW and YTM. The cultivar JB (Jinba) used as a transformation material in previous reports ranked similarly to cultivars PK and SPP. In shoot regeneration from internodes, the shoot regeneration rate was the highest for cultivar PA, followed by cultivar WW. The infection rate of leaves and internodes of 40 chrysanthemum cultivars with agrobacterium was investigated. Cultivars WPP, YNW, VS, PP, WW, FA, PA and YMN showed the highest infection levels in leaves, whereas cultivars WPP, PA, PK and YNW had the highest infection levels in internodes. Considering all of these results, cultivars VS and WW were the most appropriate for gene transformation of chrysanthemum using leaves, while cultivar PA was for internodes.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.3
• /
• pp.147-151
• /
• 2009

The research was carried out a solution to prevent the breakage of stem resulted from stem cavity in the Dendranthema grandiflorum Ramat. 'Baekma'. Stem cavity occurred in the lower parts of stem for about 5 cm long as the stem grew to 20 cm, and the breakage increased to about 60 cm as the stem grew to 80 cm. Plant height, stem diameter, and flower stalk length were the highest in the planting density of $11cm{\times}11cm$. The light interception by plants increased as the planting density decreased (47, 99 and 143%). The strength and hardness values were the greatest, $567kg{\cdot}cm^{-2}$ and $1,339kg{\cdot}cm^{-2}$ in the planting density of $11cm{\times}11cm$. Plant height and plant weight increased in the foliage fertilization of one time, but the plants in the control flowered earlier. The strength and hardness increased in the foliage fertilization treatments and the greatest in the treatment of one time application of $60mg{\cdot}L^{-1}$ Silicate fertilization. The Si content of stems increased as the fertilization concentration and treatment time increased. The Si content in $30mg{\cdot}L^{-1}$ silicate treated twice was two times as high as that of the control.

• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.721-729
• /
• 2014

This study was conducted to improve the consumption of floriculture plants by researching preferences of consumers for the main types of cut flowers. We analyzed the results of surveys, carried out by a company, that were largely about roses, chrysanthemums, and lilies. After departmentalizing consumers into groups and analyzing the results through conjoint and cluster analysis, we found that consumers showed a higher rate of use based on price and vase life than on flower color and flower shape in roses. The groups of rose consumers preferred a price of 1000 won, spray type flower shape, vase life of 7-8 days, and red flower color. In chrysanthemums, consumers showed higher rate of use for flower color than for vase life, flower shape, and price. The groups of chrysanthemum consumers preferred a price of 1000 won, standard flower shape, 16-20 days vase life, and yellow flower color. In lilies, consumers showed higher use rate for flower shape than vase life, price, and flower color. Lily consumers preferred a price of 2000 won, large flower shape, 4-7 days vase life, and yellow flower color. Thus, the major cut flowers (rose, chrysanthemum, and lily) all showed highest use rates in for vase life. These results highlight the importance of understanding the characteristics of consumer interests. They also emphasize that we should plan and create market-oriented and consumer-oriented products to improve the consumption of floriculture plants.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.61-69
• /
• 2015

This study was carried out to investigate the effects of shipping temperature and harvesting stage on the quality and vase life of cut flower in standard chrysanthemum 'Baekma' for export. Cut flowers harvested at flowering stage 4 were stored for 24 hours at $5^{\circ}C$, and then quality and vase life were evaluated after simulated shipping for 48 hours at 5, 20, and $35^{\circ}C$. In addition, cut flowers harvested in flowering stage 1 to stage 6 were evaluated after simulated shipping for 72 hours at $5^{\circ}C$. As shipping temperature increased, $CO_2$ concentration inside the box rapidly increased, and $O_2$ concentration greatly decreased. The vase life of cut flowers was extended by 3 days and chlorophyll content of leaves, fresh weight, solution uptake, and flower diameter were better maintained in $5^{\circ}C$ shipping than in 20 or $35^{\circ}C$ shipping. The vase life of cut flowers harvested at flowering stage 1 or 2 was extended by 5.2 or 5.5 days compared to those harvested at flowering stage 6, more 6. The fresh weight was lower and flower diameter was smaller by 1.3 or 2.5 cm in cut flowers of flowering stages 1 through 3 than flowering stages 4 through 6. In addition, the cut flowers of flowering stages 4 through 6 showed higher solution uptake than those of flowering stages 1 through 3. These results suggest that shipping at $5^{\circ}C$ of cut flowers harvested at flowering stage 4 is preferential for promoting vase life and quality of cut flower in standard chrysanthemum 'Baekma' for export to Japan.