• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.553-555
• /
• 2008

현재 사용하고 있는 LCD(Liquid Crystal Display) Backlight용 램프는 주로 CCFL(Cold Cathod Fluorescent Lamp)과 EEFL(External Electrode Fluorescent Lamp)이 사용되고 있다. 하지만 이 램프는 수은을 사용하여 RoHS(the Restriction of the use of certain Hazardous Substances in electrical and electronic equipment)규제가 점점 강화되면서 사용이 제한되고 있으며, 이에 따라 수은을 사용하지 않는 램프의 제작이 불가피해지고 있다. 또한 LCD TV는 CRT와 PDP와는 다른 LCD만의 Hold-type 특성과 LC(Liquid Crystal)의 응답속도로 인하여 Motion Blur현상이 나타나는 단점이 있다. 본 논문에서는 RoHS 규제를 만족시키는 무수은 면광원 램프를 구동하기 위한 인버터를 제안한다. 제안한 인버터는 포워드 방식을 사용하여 반도체 소자 및 자기 소자의 수를 줄여서 구동회로가 간단하다. 또한 면광원 램프를 세로방향으로 6블록으로 나누어 스캔구동을 하여 Motion Blur현상을 저감 시켰다. 끝으로 실험을 통하여 제안한 인버터의 유용성을 입증하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.8 s.350
• /
• pp.1-5
• /
• 2006

At-wavelength inspection system of extreme Ultra-violet lithography was developed and the inspection results were compared with the optical mask inspection system by cross correlation experiments. In at-wavelength EUV mask inspection system, a raster scan of focused euv light is used to illuminate euv light to mask blank and specularly and non-specularly reflected euv light are detected by photo diode and microchannel plate. The cross correlation results between at-wavelength inspection tool and optical inspection tool shows strong correlation. Far-field scattering fringe pattern from programmed phase and opqque defect, which were detected by phosphor plate and CCD camera shows that distinct diffraction fringes were observed with fringe spacing dependent on the defect size.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.17-22
• /
• 2004

We developed a new ANGLED display driving method which used both amplitude and pulse width modulation. For pulse width modulation, we divided a picture frame time into S sub-frames. For amplitude modulation, we used three OLED luminance(or current) levels which were controlled by TFT's gate voltages. By combining these two modulation methods, we obtained 35(=243) grey levels. And we designed a new data electrode driving circuit block with two shift registers without using DAC's. To verify the feasibility, we simulated the key circuit components by HSpice with TFT parameters extracted from current-voltage characteristics of 6${\mu}{\textrm}{m}$ channel length polysilicon TFT's. From the simulation results, we found that 320${\times}$240, dual scan, 243 grey level AMOLED display can be designed with this method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.6
• /
• pp.123-133
• /
• 2017

In this paper, we developed an optimal flicker-free control algorithm operating within 16 luminance implementation bits and 512 brightness implementation pulses irrespective of LPM(LED Pixel Matrix) module configuration on dynamic driving method of LED display system. As an implementation method, we turned the refresh rate up by increasing the number of scans through multiple shift-latches which were devised from conventional shift-latch scheme for full color representation. As a result, the LED display system of this method has no flicker phenomenon because of the novel refresh rate higher than 2,040[Hz] incomparable to 240~480[Hz] of conventional system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4467-4471
• /
• 2013

In this research, developed full-scan photoresist coating system(FPCS) can improve the efficiency of the photoresist coating system essential for spinner equipment in nano semiconductor manufacturing process. The devices developed in this research, which can be swiftly replaced in case abnormal state element changes or wafer manufacturing defect occurs, are anticipated to improve module yield as well as real-time monitoring on the state element in order to prevent the complex process defect due to the photoresist miss coating.

• Annual Conference of KIPS
• /
• 2002.04b
• /
• pp.1619-1622
• /
• 2002

최근에 생산되는 디지털 VLSI칩들은 그 집적도가 계속 높아지고 있으며, 이러한 칩들을 장착한 보드의 경우도 그 복잡성이 점차 높아지고 있다. 이에 따라 칩 및 보드에 대한 철저한 테스트 과정이 요구된다. 지금까지 보드 테스트 방법으로 널리 쓰였던 ICT(In-Circuit Test)는 칩의 고집적화에 따른 핀 간격의 조밀화와 SMT(Surface Mount Technology), BGA(Ball Grid Array), MCM(Multi Chip Module) 등의 새로운 패키징 방식의 등장에 따라 테스트 방법으로의 한계성을 드러내고 있다. 이에 대한 대안으로 등장한 IEEE Std 1149.1 은 ICT의 한계성을 극복할 수 있는 기술일 뿐 아니라 여러 가지 장점을 가지고 있으며 그 활용 분야도 다양하다. 본 논문에서는 IEEE Std 1149.1에 따라 설계된 보드 상에서 발생 가능한 고장들에 대한 고장 모델을 제시한다. 또한 각 고장 모델들의 양상과 진단 기법을 제시한다. 이를 통해 IEEE Std 1149.1에 따라 설계된 보드 상에서 발생한 고장들을 검출할 수 있으며, 고장의 종류 및 성격, 그리고 고장의 발생 위치 등의 정보를 얻을 수 있다. IEEE Std 1149.1에 따른 보드 설계가 보드의 신뢰성 보장에 긴요함을 인식하는 계기가 되기를 기대하며 제시된 고장 모델 및 진단 기법이 기술적으로 중요한 참고자료가 되기를 기대한다.

• Journal of Korea Multimedia Society
• /
• v.6 no.2
• /
• pp.309-318
• /
• 2003

XML documents are widely used for exchanging information in the distributed computing environment. Here, actual information contained in the document can only be interpreted with the provision of a proper DTD. However, XML documents collected from the web nay not always be accompanied by corresponding DTD, so that it may not be easy to extract information from such sources. In this study, we reverse construct a DTD from DTU-unknown XML sources. We then use the DTD to extract information from XML inputs and to store it into the underlying DB. The DTD construction module developed is designed in such a way that, it scans input XML files in 1-path, where most other implementations use 2-path approach. The information extraction module provides clean Java programming interfaces as well, so that it can be easily integrated with other web applications.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.1
• /
• pp.31-38
• /
• 2019

In this paper, we develop a beamforming front end platform with pipeline circuit configuration method that can apply various clinical diagnostic applications of ultrasound image technology. Hardware design targets compression applications as well as scalable applications where power, integration levels and replication possibilities are important. Firmware design was implemented to achieve optimal FPGA parallel processing level by constructing new IP and system-oriented design environment to accelerate design productivity with maximum productivity improvement using Vivado HLS tool, which is a next generation high level synthesis tool. Former supports the high-speed management function of scan data that can create an image area arbitrarily and can be appropriately corrected and supplemented when reconfiguring or changing system specifications in the future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.557-560
• /
• 2014

In digital communications systems, an interleaver spreads burst errors occurred in channels and makes it random errors. As a result, the signals are rearranged and encrypted to the 3rd party. Deinterleaving this unknown interleaved signal is very important in electronic warfare and various researches on reconstruction of interleaved signal have been studied in the literature. Unlike previous researches which is mainly about helical scan interleaver or bit unit interleaver, in this paper, we estimate the symbol unit convolutional interleavr and shortened Reed-Solomon code parameters such as the number of stages of interleaver, a codeword length and a data symbol length and propose an specific algorithm to obtain the parameters from the unknown interleaved signal and simulate this algorithm as well.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.3
• /
• pp.177-182
• /
• 2011

This paper introduces a possibility for attackers to acquire the keyboard scan codes through using the RESEND command provided by the keyboard hardware itself, based on the PS/2 interface that is a dominant interface for input devices. Accordingly, a keyboard sniffing program using the introduced vulnerability is implemented to prove the severeness of the vulnerability, which shows that user passwords can be easily exposed. As one of the intrinsic vulnerabilities found on the existing platforms, for which there were little considerations on the security problems when they were designed, it is required to consider a hardware approach to countermeasure the introduced vulnerability.