• Journal of Wetlands Research
• /
• v.19 no.4
• /
• pp.451-458
• /
• 2017

In this study, the removal efficiency of the wetland in terms of particulate matter and dead water zone through the application of baffles in the sedimentation were simulated with the use of Computational Fluid Dynamics (CFD) to determine the design of a cost-effective constructed wetland. As a result, it was analyzed that the application of the baffle in the sedimentation tank affect the flow and sedimentation rate. Fine particles such as $2{\mu}m$ and $5{\mu}m$ showed high sedimentation rate when the baffles are installed horizontally. large particles such as $10{\mu}m$ and $20{\mu}m$ showed also high deposition rate when the baffles are installed vertically. In addition, the vertical baffles is considered to be more efficient than other baffle types in terms of maintenance since the particulate matter are concentrated in narrow areas. Therefore, it is considered that the selection of the most applicable type of baffle depends on the design purpose of the wetland to be constructed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.840-846
• /
• 2011

In this paper, reflection and RCS characteristic of the EGS(Electromagnetic Gradient Surface) due to incident angle and polarization is analyzed. Incident angle, ${\theta}_i$, is rotated from $0^{\circ}$ to $50^{\circ}$ with $10^{\circ}$ steps and perpendicular and parallel polarization of incident wave are also considered each incident angle. Reflection and RCS characteristic is not much affected by variation of polarization for normal incidence(${\theta}_i=0^{\circ}$). Reflection pattern has different characteristic due to variation of incident angle and polarization but the EGS has about 2 dB of RCS difference due to polarization in RCS characteristic.

• Journal of Bio-Environment Control
• /
• v.9 no.1
• /
• pp.27-39
• /
• 2000

In this study, we quantitatively compare the cooling effects of single span plastic greenhouses by opening or shutting of toot and side vents, and operation of fan or sprinkler. With those variables, we simultaneously made experiments at 4 greenhouses under equivalent conditions. By the experiments, the shutting of roof and side vents caused the high temperature difference of indoor and outdoor which the crops cannot be cultivated. However, the opening of the windows effectively reduced the indoor temperature and showed uniform temperature distribution in the greenhouses. The sprinkler abruptly reduced the indoor temperature, and showed excellent cooling effects. Finally, this paper provides the fundamental data for environmental control in greenhouses.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.1
• /
• pp.79-87
• /
• 1989

The influence of anchor slope on behavior of sheet pile is analysed by results of model test. It can be seen that the larger inclination of anchor causes more causes more increases of the horizontal and vertical deflection of wall, but the bending moment is less influenced by the inclination of anchor. The negative friction against vertical settlement of wall has the yielding point at the excavation level of 0.71-0.80 H. The redistribution of earth pressure on the sheet pile with dredging must be considered by soil-arching. The zero pressure point from the toe of wall is 20% higher than that of the Free Earth Support Method. It is also observed that the angle of failure planes to major principal plane is larger than the angle of $45^{\circ}+{\phi}/2$.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.541-550
• /
• 1988

Natural convection in a square enclosure was investigated numerically for low prandtl number fluids using Finite Element Method. In case of Ra=10$^{4}$, 10$^{5}$ and 10$^{6}$ the temperature gradient decreases gradually at the lower end of the hot wall(or at the upper end of the cold wall) as prandtl number decreases in the range of 0.01 .leq. Pr .leq. 10. Maximum heat transfer occurs at a somewhat higher point from the lower end of hot wall(or at somewhat lower point from the upper end of the cold wall) and it draws near to the lower end of the hot wall(or draws near to the upper end of the cold wall) with increasing prandtl number. The flow in the enclosure appears as an Unicell Pattern for Ra .leq. 10$^{4}$ and secondarily flows(or tertiary flows) appears in the core region for Ra .geq. 10$^{5}$ . The line joining the center of secondary cells skewes in a clockwise direction as the Prandtl number decreases.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.91-95
• /
• 2007

It tries to develop a collect system for floating garbage flowed into the sea Based on the study on the characteristics of floating garbage in rainy season, it confirmed the structure and specification of each device and tested its performance on the sea It showed tint the collection device of this system could sweep more than 15 meters of sea area at a time when a ship moves with the efficiency of the spreading device. It means tint it is more efficient in collecting garbage than now in use garbage collecting ships. The water height of the net to which the garbage is finally input maintained more 50cm within the towing speed of 5kt. It indicates tint the garbage input performance is good The collect system of this research showed good performance collecting 200kg of garbage into the net for each test of collecting floating garbage.

• Tunnel and Underground Space
• /
• v.17 no.5
• /
• pp.381-388
• /
• 2007

The regular RC structures have been transformed into irregular RC structures by alternate load of RC structures during explosive demolition. Numerical simulation programs have contributed to a better understanding of large displacement collapse behavior during explosive demolition, but there remain a number of problems which need to be solved. In this study, the 1/5 scaled 1, 3 and 5 stories RC structures were designed and fabricated. To consider the collapse possibility of upper dead load, fabricated RC structures were demolished by means of felling method. To observe the collapse behavior of the RC structures during felling, displacement of X-direction (or horizontal), displacement of Z-direction (or vertical) md relative displacement angle from respective RC structures were analyzed. Finally explosive demolition on the scaled RC structures using felling method are carried out, collapse behavior by felling method is affected by upper dead load of scaled RC structures. Displacement of X and Z direction increases gradually to respective 67ms and 300ms after blasting. It is confirmed that initial collapse velocity due to alternate load has a higher 3 stories RC structures than 5 stories.

• Korean Journal of Plant Tissue Culture
• /
• v.22 no.3
• /
• pp.127-130
• /
• 1995

Japanese pepper (Zanthoxylum piperitum Dc.) tree of selected genotype was propagated by a two-step method. Among the media tested, BTM promoted shoot height growth and DKW revealed as superior to micro-canopy increment Multiple shoot formation was greatest when the single shoot were subcultured on medium containing 0.89 $\mu$M BA alone. The numbers of survival shoots could be markedly increased by acclimatization of the multiplied shoots itself in plastic Petridish (punctured with pin on the top) for two weeks and subsequently transplanting each shoot onto peat plug system. After transplanting the micropropagules onto pots, prickliness characteristics seem to be transmitted to all plane produced from selected genotype.

• KOMUNHWA
• /
• no.56
• /
• pp.93-146
• /
• 2000

Categories of pottery found in southern west parts of Korea are such as, Mounted Cup, Jar, Long necked jar, Pottry stands, Cups with handle and the like. It is believed to date from mid-5c that distinctive production of pottery and its distribution by whi

• The Journal of the Korea Contents Association
• /
• v.13 no.1
• /
• pp.498-511
• /
• 2013

It is time to extensively reshuffle domestic film industry, which has grown rapidly in recent years. Above all, a most urgent task for domestic film industry is to train specialized staff by working out a foundation for on-site human resource education. For this, it is necessary to review the existing apprenticeship system-a major educational system for domestic film industry for a long time-and then work out a reasonable substitute which can overcome its limitations and succeed its advantages. In other words, it is necessary to switch a current perpendicular rank system, a basis of apprenticeship system, to a horizontal specialized staff system and then establish an industrial information network with which the current status of on-site human resources can be understood and which can comprehensively manage their career, promotion and wages. In this regard, this study suggested the introduction of workplace learning and mentoring as a new system for on-site human resource education for film industry, in order to work out an educational system that could maintain abundant on-site experience and the sense of emotional tie with fellow workers-the advantages of apprenticeship system-and realize a more systematic and specialized workplace learning.