• Journal of KSNVE
• /
• v.10 no.2
• /
• pp.338-344
• /
• 2000

비선형 구조물에 대하여 미끄러짐 또는 기울어짐 해석을 수행할 때에는 수평 두 방향 입력을 동시에 고려하는 해석을 수행할 것을 추천한다. 그 이유는 단일 방향 입력만을 고려한 비선형 해석의 결과가 입력지진의 기준선 조정 여부에 아주 민감하고 자칫 과도하게 보수적이거나 또는 오히려 비보수적인 결과를 초래할 수 있기 때문이다. 특히, 오래 전에 작성되어 일차적 해석만 가능한 전산 프로그램을 사용하여 해석하는 경우 주의가 요구된다. 본 논문에서는 입력지진의 기준선조정에 의한 영향을 수평 단일방향 입력만을 고려하는 해석과 수평 두 방향 입력을 동시에 고려하는 해석에 대하여 살펴본다. 이를 위하여 자립형 계에 대한 예저 헤석을 수행한 결과, 단일방향 비선형 해석시 나타날 수 있는 이러한 불확실성을 피하기 위하여 두 방향 입력을 동시에 고려하는 해석이 필요하고 입력 지진의 기준선 조정과 연계된 표준화된 지침이 필요하다는 것을 알 수 있었다.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.865-875
• /
• 1998

The purpose of this study was to investigate the angle formed by the Sella-Nasion(SN) plane and Frankfort-Horizontal(FH) plane and evaluate the correlation and difference of the FH plane to other horizontal reference planes. Through this study we hope to present a basis for selecting a horizontal reference plae which can be implemented in cephalometric studies and in surgical orthodontic treatment planning. 600 subjects were chosen following a clinical examination md lateral cephlometric X-rays were taken. According to cephalometric analysis the subjects were classified into 3 groups , Skeletal Class I malocclusion or normal occlusion group(male 50, female 50), Skeletal Class II malocclusion group(male 50, female 65) and Skeletal Class III malocclusion group(male 50, female 50). The results were as follows. 1. The angle formed by the SN plane and FH plane showed no difference among the malocclusion groups, but there was a significant sex difference. For males the angle measured was $7.47^{\circ}{\pm}2.40^{\circ}$ whereas for females it was $8.93^{\circ}{\pm}2.72^{\circ}$. 2. The angle formed by the SN plane or FH plane and Mandibular plane was higher in females for all malocclusion groups. This angle in the Skeletal Class I malocclusion group was lower than in the other two groups. 3. There was no difference among the sexes or malocclusion groups considering the angle formed by the FH plane and Palatal plane. 4. The genial angle in the Skeletal Class III malocclusion group was higher than in the Skeletal Class I and Class II malocclusion groups in both sexes.

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.251-265
• /
• 1999

Various types of horizontal reference planes are used for diagnosis, treatment planning and evaluation of treatment results. But these reference Planes lack accuracy and repro-ducibility, and are mainly for Caucasian. Unlike the adult patients who have completed growth, the horizontal reference planes for growing children may change continuously during growth. Therefore this must be considered in selecting the horizontal reference plane. The purpose of this study was to Investigate the angle formed by the Sella-Nasion(SN) plane and Frankfort-Horizontal(FH) plane and evaluate the angle formed by FH plane and other horizontal reference planes in relation to different skeletal maturity and malocclusion types. 540 subjects with no orthodontic treatment history were chosen, and hand -wrist X-rays and lateral cephalometric X-rays were taken. According to SMA(Skeletal Maturity Assessment) of hand-wrist X-rays, the subjects were classified into 3 skeletal maturity groups : SMI 1-4 for group A, SMI 5-7 for group B and SMI 8-11 for group C. A second classification was made according to cephalometric analysis of lateral cephalograms. The subjects were classified into 3 malocclusion groups : Skeletal Class I, II and III malocclusion group. 10 measurements were evaluated. The results were as follows. 1. The angle formed by the SN plane and FH plane showed no difference among skeletal maturity groups, malocclusion groups, and between .sexes. 2. The angles formed by the SN plane and FH plane were $8.27^{\circ}{\pm}2.31^{\circ}$ for males and $8.59^{\circ}{\pm}2.24^{\circ}$ for females. The average value for females and males was $8.42^{\circ}{\pm}2.28^{\circ}$. 3. The angle formed by the FH plane and palatal plane was almost constant showing no difference among skeletal maturity groups, malocclusion groups, and between sexes($1.09^{\circ}{\pm}3.21^{\circ}$).

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.761-770
• /
• 1997

71 Class I malocclusion samples were selected and they were divided into premolar-extraction and non-extraction groups. Vertical and horizontal cephalometric evaluations on dental and soft tissue measurements were done before and after treatment. Also, treatment results in adolescent patients and adult patients were compared. The following conclusions were obtained: 1. In comparison of extraction and non-extraction groups, all the dental and soft tissue measurements, with exception of SN-MP angle, upper lip to E-line, vertical movement of upper first molar, md horizontal movement of lower first molar, showed statistically significant differences. 2. In comparison of extraction and non-extraction groups of adolescent samples, there were statistically significant differences in upper and lower incisor inclinations, horizontal dental movements from vertical reference line, positional changes in upper and lower lips, and mesial movements of upper first molar. 3. In comparison of extraction and non-extraction groups of adult samples, there were statistically significant differences in upper and lower incisor inclinations, horizontal dental movements from vertical reference line, positional changes in upper and lower lips from I-line and vertical reference line, vertical height of upper first molar, and mesial movement of lower first molar. 4. There was no statistically significant difference in SN-MP angle between extraction and non-extraction groups of both adolescent and adult samples.

• Korean Journal of Agricultural Science
• /
• v.30 no.2
• /
• pp.164-174
• /
• 2003

This study was performed to suggest a rational method for the stability evaluation of agricultural reservoir in the very soft ground. The stability methods for agricultural reservoir was used to compare and analyze with various condition by limit equilibrium method. The behavior of settlement-displacement obtained by field monitoring system was used to compare and analyze with various stability methods, and to investigate the applicability of the methods for stability evaluation of agricultural reservoir. The horizontal displacement was abruptly increased when physical properties of soft clay reached its maximum values and therefore, the values of these properties could be used to the fundamental data for stability evaluation. The evaluation of the stability of agricultural reservoir was suggested to use the inclination of curve rather than critical line.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.2
• /
• pp.179-187
• /
• 2015

The purpose of this study is to identify the aspect that the traffic distribution function changes, according to the direction of the datum line and the horizontal and vertical positions of the datum point applied when it is calculated. Targeting routes at the entrance of Mokpo Harbor, this study tested using AIS survey data of January 2013 the effects of the three variables-direction of the datum line(${\theta}$), horizontal position($\mathfrak{L}_H$) and vertical position($\mathfrak{L}_V$) on mean ($\bar{x}$) and standard deviation (${\delta}$). The test result showed that $\bar{x}$ and ${\delta}$ were changed according to the change of ${\theta}$, because the extracted sample data were changed according to ${\theta}$; and the changes of $\bar{x}$ and ${\delta}$ according to ${\theta}$ were drawn as the relation of the sine function' sum. In addition, it was found that setting up ${\theta}$ that the change value of ${\delta}$ becomes the least as the direction of the datum line was valid, to determine the optimum passage distribution function on complex waters with multiple branches of route. The result of this study is expected to be used as basic data to understand maritime traffic flow based on more quantified data of normal distribution and make decisions related to maritime traffic safety management.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.2
• /
• pp.183-192
• /
• 2008

Modern dental reconstructions do not only aim at restoring the patient's mastication, but rather at improving general well-being and quality of life, especially in terms of esthetics. The media, the internet, advertising, and many other facts of society contribute to an increased cosmetic awareness. A 35-year-old male patient presented with as follows: 1) the porcelain fracture of ceramo-metal restoration on #11 and #23, 2) the inclination of incisal plane to horizontal reference plane, 3) the dental midline deviation to facial midline, and 4) the lack of symmetry on upper anterior dentition. The patient requested an aesthetic improvement using fixed prosthodontics including implant-supported restorations. In the upper anterior region, one of the goals of the conventional as well as implant prosthesis is to achieve restorations with the dental attractiveness and beauty in the respect of dental, dentofacial, and facial compositions. This case report presents geometrically improvement of dental esthetics using conventional and implant prosthesis with soft and hard tissue augmentation.

• Korean Journal of Agricultural Science
• /
• v.25 no.2
• /
• pp.260-270
• /
• 1998

The field tests were performed to suggest the rational method for stability evaluation of soft clay. The behavior of settlement-displacement obtained by field monitoring system was to compare and analyze the results of the observationed method, and to investigate the complex behavior of soft clay with filling height. The results of this study are summarized as follows. 1. The horizontal displacement was suddenly increased when physical properties of soft clay showed maximum values and the part of the turning point. The values of these properties were available to the fundamental data for stability evaluation. The shear deformation appeared that difference of the horizontal displacement was maximum values. 2. Although the stability of embankment by step filling showed the unstable part over the failure standard line, the embankment was confirmed stable. So the evaluation of the stability of embankment is reasonable to use the inclination of curve than failure standard line. 3. The horizontal displacement and relative settlement were increased as same ratio at improvement ground. Estimation of shear deformation using Terzaghi's modified bearing capacity should consider the relations of embankment load and undrained shear strength at nonimprovement ground, and minimum safety factor is recommended to use larger than 1.2. 4. Excess pore water pressure was increased with increasing of filling height and decreased with maintain the filling height. The embankment was unstable when filling height was exceed the evaluation standard line, and the behavior of excess pore water pressure and horizontal displacement could use as a standard of judgement of the filling velocity control because their behavior were agree with each other.

• The Journal of Information Technology
• /
• v.6 no.1
• /
• pp.71-84
• /
• 2003

In this paper, it is presented the efficient system for data recognition using the proposed binary code images. The proposed algorithm finds the position of binary image. Through the process of the block region classification, it is classified each block with the edge region using the value of gray level only. Each block region is divided horizontal and vertical edge region. If horizontal edge region blocks are classified over six blocks in any region, the proposed algorithm should search the vertical edge region in the start point of the horizontal edge region. If vertical edge region blocks were found over ten blocks in vertical region, the code image would found. Practical code region is acquired from the rate of the total edge region that is computed from the binary image that is processed with the average value. In case of the wrong rate, it is restarted the code search in the point after start point and the total process is followed. It has a short time than the before process time because it had classified block information. The block processing is faster thant the total process. The proposed system acquires the image from the digital camera and makes binary image from the acquired image. Finally, the proposed system extracts various characters from the binary image.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.11a
• /
• pp.23-28
• /
• 2005

고해상도 위성영상으로부터 건물, 도로 등의 인공지물의 정보를 추출하기 위한 연구들이 현재 활발히 진행되고 있다. 대부분의 기존 연구들의 경우, 위성영상에서 3차원 건물정보를 추출하기 위해서는 영상과 별도의 기준점을 필요로 하며, 영상에서의 측정값을 3차원 정보로 변환하기 위해서는 센서모델링의 과정을 거쳐야 했다. 이 연구에서는 단안식 (Monoscopic)영상으로부터 이러한 복잡한 과정을 거치지 않고 직접 건물의 3차원 정보를 추출하는 기술개발에 대하여 소개한다. 제안하는 방식은 단안식 영상에서 영상의 방위각 및 촬영지역에서의 태양과 카메라의 방위각 및 고도각을 이용하여 건물의 높이가 주어졌을 때 이에 따르는 건물 수직선과 건물 그림자를 영상에 투영시키는 과정을 반복함으로써 투영된 건물 그림자가 실제 영상에서 관측되는 건물의 그림자와 일치될 대의 건물의 높이 값을 구하고 건물 지붕 외각선을 구해진 건물의 높이 값에 따르는 건물 수식선 만큼 수평 이동하여 건물의 위치를 구하게 된다. 실제 대전지역을 촬영한 IKONS 영상을 이용하여 실험한 결과 이와 같은 방법으로 취득 된 건물 높이값이 약 1m 내외의 정확도를 가지는 것을 나타났다.