• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.900-908
• /
• 2014

The Characteristics of the flowfields of a square prism having a small vertical plate at the upstream side was investigated by measuring of fluid force on the square prism and by visualization of the flow fields using PIV. The experimental parameters were the width ratios(H/B=0.2~0.6) of vertical plates to the prism width and the gap ratios (G/B=0~3) between the prism and the vertical plate. The drag reduction rate of the square prism was increased with H/B in case of the same G/B, and was increased and then decreased with G/B in case of the same H/B. The lift reduction rate of the square prism was hardly not affected by the width and gaps ratios, the average value was about 48.1%. In case of a square prism having a small vertical plate, the stagnation regions were represented in the upstream and downstream sides of the square prism.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.198-204
• /
• 2016

The characteristics of the flow field of a circular cylinder having a small vertical plate at the upstream side are investigated by measuring the fluid force on the circular cylinder and by visualizing the flow field using particle image velocimetry. The experimental parameters are the width ratios (H/B = 0.2-0.6) of the vertical plates to the circular cylinder's diameter, and the gap ratios (G/B = 0-3) between the circular cylinder and the vertical plate. The drag reduction rate and Strouhal number of the circular cylinder increased and then decreased with G/B in the case of the same H/B. The drag reduction rate increased with H/B in the case of the same G/B. In the case of a circular cylinder having a small vertical plate, the stagnation regions are represented on the upstream and downstream sides of the circular cylinder, and the size of that region on the upstream side increased with H/B.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.10a
• /
• pp.32-32
• /
• 1999

초음속 과소 팽창 제트가 경사진 평판에 충돌을 하게 되면 평판의 표면과 노즐출구에서 팽창된 자유제트(Free jet)와의 상호 간섭으로 인해 매우 복잡한 유동 구조가 형성된다. 예를 들면, 수직평판에서 발생되는 판 충격파(Plate shock)는 경사평판에서는 Upper plate shock, Lower plate shock, Intermediate plate shock과 같이 여러 형태로 발생되어 평판에서의 압력분포에 있어 수직일 경우와 다소 다른 경향을 보여준다. 본 연구의 주요 목적은 평판의 경사각을 변화시킬 때 평판 표면에서의 복잡한 유동 현상을 이해하는데 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.798-805
• /
• 1986

단열 혹은 등온 경계조건 하의 수직평판과, 선열원으로부터 형성되는 열상승류 간의 열적 상호작용을 조사형ㅆ다. 경계층 방정식은 Patankar-Spalding의 유한차분법을 사용하여 계산하였다. 단열평판의 경우에 자유 열상승류로부터 벽 경계층으로 부터의 점진적인 발달 단계를 설명하였다. 등온평판의 경우에는 평판주위에 새롭게 형성되는 열경계층에서의 열전달현상을 자세히 고찰하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.6
• /
• pp.609-615
• /
• 2011

A two-dimensional Stokes flow past a vertical plate in a channel is analyzed. The vertical plate is located at the center of the channel, and plane Poiseuille flow exists far upstream and downstream of the vertical plate. The Stokes approximation is used, and the flow is investigated analytically using the method of eigenfunction expansion and the point collocation method. From the analysis, the stream function and pressure distribution are obtained, and the pressure and shear stress distributions on the plate and channel wall are calculated. The additional pressure drop induced by the vertical plate and the force exerted on it are calculated as functions of the length of the vertical plate. For a typical length of the vertical plate, the streamline pattern and pressure distribution are shown. In addition, numerical analysis of laminar flow with a small Reynolds number is carried out to analyze the effect of a small Reynolds number on the flow pattern.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.21-27
• /
• 2014

The influence of the surface roughness on the natural convection heat transfers of a vertical plate were measured experimently. Mass transfer experiments instead of heat transfer experiment were performed based on the analogy. The piecewise electrodes were adopted to measure the local-average Nusselt number. Prandtl number was 2,014 and height of the plate was 0.154m The test results for a smooth surface showed similar heat transfer rate with the Le Fevre heat transfer correlation for a vertical plate. The Nusselt number increased with the roughness Rz $0.5{\sim}14.1{\mu}m$. The test results were presented by a simple correlation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.992-1000
• /
• 1991

본 연구에서는 두개의 수직 평행 평판의 혼합대류 열전달에 대하여 평판간격 과 평판온도를 변수로 하여 수치해석과 실험을 행하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.125-126
• /
• 2007

In this paper, the floating body with vertical plate is introduced with a study on the flow patterns and characteristics in around the floating body by using 2 frame particle tracking method. This paper introduce an analysis method to predict the characteristics if flow around the neighboring fields if Floating Body with vertical plate in order to investigate a high performance model. Flow visualization has conducted in a drcu1ating water channel by a high speed camera and etc. Flow phenomena according to turbulence intensity distribution and flow separation around the floating body with vertical plate were obtained by two-dimensional PIV system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.5
• /
• pp.54-63
• /
• 2011

This paper presents the improving impedance charactersitics of a planar monopole antenna with a vertical ground plane. For improving impedance characteristics, we used the effect of a vertical ground plane. To analyze the effect of vertical ground plane, we proposed the dipole antenna mode. the impedance characteristics of planar monopole antenna are improved by correlation between monopole antenna and vertical ground plane, based on each operating mode. Our analysis indicates can improve the impedance characteristics of varying planae monopole antennas.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1645-1651
• /
• 1990

The steady laminar mixed convection from two finite vertical parallel plates has been studied by numerical procedure. The governing equations are solved by the finite difference method and point successive over relaxation scheme at R3=100-1000, Gr=0-10$^{6}$ , Pr=0.71 and dimensionless plate spacing b/$\ell$=0.05-0.1. The plume interaction caused by the thermal interference of two plates is observed. As Reynolds numbers are increased, optimum plate spacings are moved to narrow spacings at the same Grashof number, and as Grashof numbers are increased, to wide spacings at the same Reynolds number.