• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.246-254
• /
• 2016

Thick-shell welding for super-sized oil storage tanks is currently done manually, which causes deterioration in quality and a lack of uniformity due to frequent rewelding. The limitations of the external environment must also be considered for manual welding. This paper describes the development of a carriage system for automatic vertical welding to increase reliability, reduce cost, and enhance productivity. The system consists of a welding platform, carriage device, and control unit, which were conceptually designed according to design specifications and manufactured with modular parts. In addition, the structure was analyzed for safety and to predict design problems in advance, and the results are reflected in reviewing the design. To evaluate the performance of the system, a tensile test, bending test, and weld time test were carried out, and the results were satisfactory. The time required for automatic weld was greatly improved by more than 87%, compared to the manual welding time.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.521-533
• /
• 2000

This study was investigated to evaluate the morphologic characteristics of openbite and deep bite in Class I malocclusion patients and to find skeletodental factors which contributed to vertical discrepancy in Class I malocclusion. The subjects were consisted of 40 control subjects (male 20, female 20) and 40 Class I openbite patients and 40 Class I deep bite patients. Lateral cephalograms in centric occlusion were taken, traced and digitized lot each subjects. The computerized statistical analysis were carried out with SPSS program. The results were as follows. 1. The pattern of vortical discrepancy in Class I malocclusion is mainly influenced by the skeletodental factors under palatal plane. 2. In openbite group, vortical discrepancy is prominent on anterior lower face and is closely related with skeletal factors such as mandibular form and inclination. 3. In deep bite group, dental factors such as ewe of Spee, vertical height of maxillary molar and skeletal factor such as articular angle were contributed to the vertical discrepancy. 4. The multiple regression analysis showed that overbite in Class I molar relationship was determined mainly by dental factors such as lower incisor to occlusal plane angle, curve of Spee, interincisal angle, and ODI.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2012.05a
• /
• pp.141-142
• /
• 2012

다운엔더 개념설계요건 설정을 위해서 PWR $16{\times}16$ SF집합체 제원을 분석하였다. 또한 수직에서 수평으로 전환될 때 충격량을 최소화하기 위해서 모의집합체 충격실험을 수행하였다. 그 결과 수직에서 수평으로 회전되는 각속도(30초/$90^{\circ}$)를 고려할 때 평균값은 약 0.1 g, 최대 약 0.3 g 정도가 되어 거의 충격을 받지 않음을 알 수 있다. 주요 설계요건으로 그리이드(grid)에 가해지는 수평클램프(clamp) 힘은 240kg, 하부노즐에 가해지는 수직클램프 힘은 900kg 이내로 하였다. 다운엔더의 개념설계를 위해서 기구학적 특성을 반영하였고, 전환시간을 30초/$90^{\circ}$로 하였다. 원격 유지 보수성을 향상하기 위하여 Solid Works 프로그램 툴(tool)을 이용하여 5개의 주요 모듈을 구성하였고, SF 집합체 다운엔더 개념을 3D로 설계하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.3
• /
• pp.284-290
• /
• 1995

다공성 실리콘의 기공은 n형 실리콘의 경우 기판에 수직으로 성장하여 이는 큰 곡률을 가지는 기공 끝 부분에서의높은 전기장에 의한 tunneling 기구로 설명된다. 본연구에서는 불산 수용액에서 전기화학적인 방법으로 다공성 실리콘을 제조할 때 n형 단결정 실리콘 기판과 전해질 용액의 계면에서의 전압 분포를 Poisson식에 의하여 수치적으로 계산하였다. 이 전압 분포로 기공 벽에서의 전기장 세기 및 전류 세기를 구하여 기공이 기판에 수직으로 성장하는 것을 설명하였다. 기공 사이의 거리는 고갈층의 두께에 의하여 결정되며, 고갈층의 두깨를 계산하여 그 원인에 대해서도 고찰하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.3
• /
• pp.16-23
• /
• 2008

Flow analyses have been performed to investigate the uniformity of propellant flow through the oxidizer manifold of a 30 tonf full-scaled combustor. Injectors were simulated as porous medium layers of equivalent pressure drops. The uniformity of oxidizer propellant has been analyzed for various diameters of holes in vertical/horizontal distributors and configurations of oxidizer inlet to propose an improved design solution. It has been proven that the mass flow uniformity were improved by adjusting the holes in vertical/horizontal distributors.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.115-131
• /
• 2018

Extension plate attached PHC piles and bolts spliced PHC piles were installed in field test site. Pile integrities were checked during installation with dynamic pile test and the actual pile conditions after installation were compared with integrity index (${\beta}$ index) by PDA test. Theoretically the break in near pile end or pile end (especially extension plate itself) was very difficult to access by integrity index (${\beta}$ index) and also require a high level of knowledge and field experience on PDA test. First actual wave equation of bolts spliced PHC piles due to bolts spliced equipment can be different with welding spliced. Second wave length of the stress wave from installing can be longer than the height of bolts spliced equipment (about 100 mm). Third Beta processing in PDA analysis function is very difficult to access without a high level of knowledge and field experience on wave equation. Above-mentioned three reasons can make conclusion that traditional PDA test in domestic site can not access the integrity of bolts spliced equipment in bolts spliced PHC piles.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.21-21
• /
• 2006

21세기 정보통신 및 관련 소재의 연구방향은 새로운 기능성 확보, 극한적 제어성, 복합 및 융합이라는 경향으로 발전해 가고 있다. 반도체 기술 분야에서 현재의 공정적 한계를 극복하고 새로운 기능성을 부여하기 위해 나노 합성과 배열을 기본으로 하여 bottom-up 방식의 나노소자 구현이 큰 주목을 받고 있다. 나노선의 경우 나노 스케일의 dimension, 양자 제한 효과, 우수한 결정성, self-assembly, internal stress 등 기존 벌크형 소재에서 발견할 수 없는 새로운 기능성이 나타나고 있어 바이오, 에너지, 구조, 전자, 센서 등의 분야에서의 활용이 가능하다. 현재 국내외적으로 반도체 나노선으로 널리 연구되고 있는 재료는 ZnO, $SnO_2$, SiC 등이 중심이 되고 있다. 이중 ZnO 나 노선의 합성을 위해서는 thermal CVD, MOCVD, PLD, wet-chemical 등 다양한 방법이 사용되고 있다. 특히 MOCVD 방법에 의해 수직 정렬된 ZnO 나노막대를 성장할 수 있다. 이러한 나노막대는 MO 원료 및 산소 공급량을 적절히 제어함으로서 수직 배향 및 나노선의 구경 제어가 가능하며, 나노 막대의 크기 제어와 관련해서는 반응 관내의 DEZn 와 $O_2$의 양을 변화시켜 구조체의 크기를 수 십 ~ 수 백 나노미터의 크기로 제어할 수 있다. 본 연구는 이러한 ZnO 나노선의 성장과정에서 $210^{\circ}C$ 이하의 저온에서 성장한 ZnO 버퍼층을 이용해 나노구조의 형상을 제어하고자 하였다. 특히 ZnO 저온 버퍼층의 두께에 따라 나노막대의 직경변화, 수직배향성, 형상변화의 제어가 가능하였다. 나노막대의 특성 평가는 TEM, SEM, PL, XRD 등을 이용하여 구조적, 결정학적, 광학적 특성을 분석하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.2
• /
• pp.1-7
• /
• 2023

Durability was evaluated by performing a full-scale vertical load fatigue test and a wheel load performance test on the HRS, which reduces the replacement time of the existing expansion joint and improves serviceability to allow partial replacement by lane. As a result of the vertical load fatigue test, the maximum stress of the rail-type expansion joint is 170 MPa, which is about 47.8% of the yield strength of the HRS expansion joint rail 355 MPa. The vertical load fatigue test of the HRS expansion joint with improved serviceability set the size and load of the load plate according to the road bridge design standards, did not show any fracture behavior in the vertical load fatigue test and the wheel load performance test 2 million times, and its durability and safety were verified.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.2
• /
• pp.229-235
• /
• 2015

Purpose: This study was undertaken to study on visual function before and after prescription of vertical prism. Methods: 80 subjects (10-30ages) who had been precribed vertical prism and 1 year after they were represcribed vertical prism. Results: Phoria (p=0.000), supra vergence (p=0.000), NPC (p=0.003), NPA (right eye) (p=0.005), NPA(left eye) (p=0.000) showed a significant change. Conclusion: Vertical prism prescription was reduced during revisit. Supra vergence, NPC, NPA(right eye), NPA(left eye) showed a significant change. Binocular Accommodative lag was not associated with vertical prism prescription and binocular vision findings.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.65-74
• /
• 2019

This study presents the optimal isolation period according to the number of vertically expended stories in order to provide the basic data for the application of the seismic isolation system in the vertically expended remodeling of the aged apartment. As a result of the structural analysis, the isolation period should be at least twice the primary structure in three-story vertical expansion, three times in two-story expansion, and four times in one-story expansion for the effective application of the isolation system. On the basis of the result, the efficacy of an isolation system for the actual apartment structure, which is three-story vertically expended, was analytically verified. The maximal acceleration response on the top floor reduced by 70% and 65% of the non-isolated structure in the X and Y directions respectively. Additionally, the base shear force decreased by 30% in the both directions, compared to the non-isolated structure.