• Journal of the Korean Geophysical Society
• /
• v.9 no.1
• /
• pp.1-6
• /
• 2006

To remove ringing and increase vertical resolution of GRP data, signature deconvolution was applied to GPR data obtained using a 100 MHz antenna in the Soyang Lake. The signature was extracted through stacking reflection signals from the lake bottom. Results of this deterministic deconvolution was compared with those from the conventional Wienner method. Due to increased vertical resolution, both deconvolution methods are able to resolve three or more layers in an apparent single layer on the input data. However, identification of reflection boundaries from ringing is not easy due to poor definition in the output data of the Wienner filter. On the contrary, the signature deconvolution greatly enhances both vertical resolution and definition of reflection boundaries, showing detailed internal stratigraphic features of the three sedimentary layers. Since extraction of signature at various depths is possible, this deconvolution method can be appled effectively to unstationary GPR data.

• The Journal of Information Technology
• /
• v.5 no.2
• /
• pp.69-80
• /
• 2002

Conventionally, we have used an acoustic microscope at single operating frequency. The resolution and quality of the measured images are determined by transducer of the microscope. In this paper, we have studied Vertical Resolution Enhancement with Acoustic Reflection Microscope using combining bases of support for SFR(Spatial Frequency Response). Increased Vertical resolution can be obtained by taking three-dimensional images at more that one frequency and numerically combining the results. As results of the experiment, we could get enhanced images with the rate of contrast in proportion to the changing rate of depth.

• Journal of radiological science and technology
• /
• v.26 no.2
• /
• pp.49-56
• /
• 2003

The purposes of this study are to improve the ultrasound resolution of various nylon and metallic mono-filament wires, therefore, it was tested that it analyze on nylon mono-filament wire of 0.1 mm in A Co.'s ultrasonic phantom and synthesis of C15 g tissue mimicking materials(TMM), analyze resolution of nylon and metallic mono-filament wires in water and TMM. The results obtained were summarized as follows: 1. Metallic mono-filament wire of 0.1 mm and nylon mono-filament wire of 0.12 mm, 180 denier showed that it cleared dot echo pattern. 2. Metallic and nylon mono-filament wire of 0.2 mm showed that it cleared comet tail echo by reverberation artifact. 3. Nylon and metallic mono-filament wire of 0.1 mm showed that it can used for dead zone and axial resolution test. 4. Nylon mono-filament wire compared with metallic mono-filament wire showed that it satisfy elasticity and construction. 5. Degree of hardness of na not changed mono-filament's echo textures.

• The Korean Journal of Nuclear Medicine
• /
• v.39 no.1
• /
• pp.49-56
• /
• 2005

Purpose: Dedicated animal PET is useful equipment for the study of new PET tracer. recently, microPET R4 was installed in the Korea institute of radiology and medical science. In this study, we measured the characteristics of scanner. Materials and methods: Resolution was measured using a line source (F-18:65 ${\mu}Ci$, inner diameter: 0.5 mm). The line source was put in the axial direction and was moved from the center of field of view to outside with 1 mm interval. PET images were reconstructed using a filtered back-protection and ordered subset expectation maximization. line source (16.5 ${\mu}Ci$, 78 mm) was put on the tenter of axial direction to measure the sensitivity when the deadtime was under 1%. Images were acquired during 4 minutes respectively from center to 39 mm outward. Delayed count was subtracted from total count and then decay was corrected for the calculation of sensitivity. Noise equivalent count ratio and scatter fraction were calculated using cylindrical phantom. Results: Spatial resolution of reconstructed image using filtered back-projection was 1.86 mm(radial), 1.95 mm(tangential), 1.95 mm(axial) in the tenter of field of view, and 2.54 mm, 2.8 mm, 1.61 mm in 2 cm away from the center respectively. Sensitivity was 2.36% at the center of transaxial field of view. Scatter fraction was 20%. Maximal noise equivalent count ratio was 66.4 kcps at 242 kBq/mL. Small animal images were acquired for confirmation of performance. Conclusion: Performance characteristics of microPET R4 were similar with reported value. So this will be a useful tool for small animal imaging.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.1
• /
• pp.22-27
• /
• 1993

산업기술의 발달에 따라 각 분야마다 정밀한 부품을 요구하고 있다. 이는 이들 부품이 시스템의 성능에 영향을 미치고 있기 때문이다. 부품의 정도는 길이정도와 표면의 정도를 모두 의미한다. 길이정도는 부품의 상대적 크기정도를, 표면정도는 3차원 형상정도를 나타낸다. 이들 부품의 정도를 평가하기 위해서는 반드시 측정이라는 방법이 수행되어야 하며, 측정은 요구되는 측정정도에 따라 이에 상용되는 방법으로 행해지게 된다. 요구되는 측정정도는 시간이 지남에 따라 점차 증가되고 있다. 이 러한 경향은 그림1의 시대에 따른 측정정도를 보면 확인할 수 있다. 시대에 따라 측정정도는 급격히 증가하고 있고 현재의 측정은 초정밀측정이라 말하는 약 0.1nm의 정밀도를 갖고 있다. 측정정도에 따라 표면측정기술도 여러가지 방법이 행해지고 있는데 이들 측정방법은 크게 접촉식 측정방법과 비접촉 측정 방법으로 나눌 수 있다. 대표적인 접촉식 측정방법으로는 촉침식 측정방법을 들 수 있다. 이 방법은 다이아몬드 촉침을 표면상에 접촉하여 주사이동하게 하고 이때 표면의 요철에 따른 촉침의 상하운동을 고성능 변위센서를 이용하여 표면형상을 측정하는 것이다. 이는1nm의 수직분해능을 갖고 측정이 가능 하다. 이 방법은 표면에 접촉함으로 인해 신뢰성이 높지만, 표면의 접촉압력으로 인해 표면의 손상 우려가 있다. 이런 이유로 현재 비접촉 측정방법이 주목받고 있다. 표면측정을 실현하는 데에는 광학 기술이 적극적으로 활용되고 있으며, 최근에는 물리학의 원리들이 도입되고 있다. 본 글에서는 이러한 측정기술의 기본원리를 소개하고 각 기술이 응용되는 예를 소개하고자 한다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.18 no.1
• /
• pp.21-24
• /
• 2017

Passive millimeter wave (MMW) imaging penetrates clothing to detect concealed objects. The distances extraction to the concealed objects is critical for the security and defense. In this paper, we address a passive stereo 3 mm MMW imaging system to extract the longitudinal distance to the concealed object. The concealed object area is segmented and extracted by the k-means clustering algorithm with splitting initialization. The distance to the concealed object is estimated by the corresponding centers of the segmented objects. In the experimental two pairs (each pair for horizontal and vertical polarization) of stereo MMW images are obtained to estimate distances to concealed objects.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.52.1-52.1
• /
• 2018

Orion Molecular Clouds Complex(OMC) 분자운에는 별 생성은 없으면서 은하면 방향으로 누워있는 큰 규모($10^{\circ}{\times}0.5^{\circ}$)의 필라멘트 구조가 있다. 본 연구는 북쪽 필라멘트(이하 NF)를 대상으로 12CO (J = 1-0) 선 관측 데이터를 이용하여 필라멘트의 운동학적 연구를 수행함으로서 은하면과의 상관관계를 알아보고자 하였다. 관측은 공간분해능은 2 arcmin인 SRAO(Seoul Radio Astronomy Observatory)의 6m 밀리미터 망원경이 사용되었고 큰 규모로 인해 은하면으로부터 먼 순서로 NF1, NF2, NF3 세 곳으로 관측 지역이 정해졌다. 연구결과 필라멘트는 매우 낮은 수준의 12CO (J = 2-1)과 티끌 분포에서 자기장을 따라 은하면 방향으로 연계되어 보였다. 밀도 분포에서는 SRAO 12CO (J = 1-0) 적분강도와 Planck 위성의 12CO (J = 2-1)과 티끌 자료를 이용했을 때, 12CO와 성간 티끌은 주로 은하면에 수직인 방향에서 밀도가 높았다. 속도 분포와 위치 속도 분석을 통해 NF는 단일 구조의 분자운 형태이고 NF2 하단에서는 회전 운동의 가능성이 확인되었다. NF3는 자기장에 의해 생성된 나선형 회전을 하고 있으며, NF2와 NF3를 따라 은하면을 향하여 12CO (J = 1-0)를 비롯한 물질이 흐르고 있음도 확인되었다. 하지만 은하면을 향하여 물질이 흐르는 원인을 제공하는 천체가 무엇인지와 NF1과 NF2 상단의 회전 운동은 확인 할 수 없었으며 이들 지역에 대한 상세한 관측이 요구된다.

• Journal of the Korean Geophysical Society
• /
• v.2 no.2
• /
• pp.100-110
• /
• 1999

In order to find a good seismic source for high-resolution reflection surveys on a tidal flat, characteristic features of several sources were examined through test recording by the walkaway configuration. The sources comprise portable vibrator, 1.2 kg monkey spanner, 4.7 kg sledge hammer, and weight drops with a 30 kg and a 100 kg iron ball, respectively. We analyzed raw and filtered seismic data for the resolution of individual events, then compared various seismic sources to define suitable one for the high-resolution survey in terms of energy level and frequency contents. The study reveals that the portable vibrator is the most suitable source for the detection of and imaging geologic structures less than 20-30 m deep in a tidal flat. We ascribe this to the wide frequency band and high-frequency contents of the portable vibrator. In contrast, the hammer may be an alternative where the target depth increases up to 100 m.

• Progress in Medical Physics
• /
• v.13 no.1
• /
• pp.44-50
• /
• 2002

CsI(T1) single crystal was grown in a Bridgman growing apparatus, which has the diameter of 11 mm and the mole ratio of 0.001 mol%. Radiation sensors were made with CsITl)crystal and two photodiodes, and measured spectroscopic characteristics and linearity for gamma-ray and X-ray. The energy resolution of CsI(T1) radiation sensor has been measured with $^{22}$ Na, $^{137}$ Cs and $^{60}$ Co gamma standard sources. Also output linearity of CsITl) sensor was measured for diagnostic radiation region. The energy resolutions of CsI(T1) radiation sensor for 0.511MeV gamma-ray from Na-22 source, 0.662MeV from Cs-137 source, and 1.17MeV and 1.332MeV from Co-60 source were 13.2%, 8.3%, 6.7%, and 5.1% respectively. Also the output linearity up to 80mAs current for 60kVp, 80kvp, 100kVp, 120kVp tube voltages has been studied.

• The Journal of Engineering Geology
• /
• v.32 no.1
• /
• pp.157-171
• /
• 2022

Electrical resistivity tomography (ERT) is a traditional and representative geophysical method for determining the resistivity distributions of surrounding soil and rock volumes. Depth resolution profiles and sensitivity distribution sections of the resistivities with respect to various electrode configurations are calculated and investigated using numerical model data. Shallow vertical resolution decreases in the order of Wenner, Schlumberger, and dipole-dipole arrays. A high investigable depth in homogeneous medium is calculated to be 0.11-0.19 times the active electrode spacing, but is counterbalanced by a low vertical resolution. For the application of ERT depth resolution profiles and sensitivity distributions, we provide subsurface structure models for two types of land-creping failure (planar and curved), subvertical fracture, and weathered layer over felsic and mafic igneous rocks. The dipole-dipole configuration appears to be most effective for mapping land-creeping failure planes (especially for curved planes), whereas the Wenner array gives the best resolution of soil horizons and shallow structures in the weathered zone.