• Journal of Sericultural and Entomological Science
• /
• v.45 no.1
• /
• pp.10-17
• /
• 2003

This study was carried out to analyze physicochemical characteristics of sericin cocoon from silkworm, Bombyx mori. The degumming loss increased with increasing treatment time up to 2 hr, and temperature up to 130$^{\circ}C$. At 130$^{\circ}C$, degumming loss of Nd-s jam and Nd$\^$H/ jam were 100% while that of Baegok jam was 24%. Nd-s jam and Baegok jam ha high glycine content of 29.1∼46.3 mol% where as Nd$\^$H/ jam had high serine content of 32.6 mol%. Thermal denaturation temperatures were found at 218$^{\circ}C$ for Nd-s jam, 216$^{\circ}C$ for Nd$\^$H/ jam, and 218$^{\circ}C$ for Baegok jam. Before degumming, crystallinities obtained by FT-IR analysis were 44.3, 43.7, and 59.9% for Nd-s jam, Nd$\^$H/ jam, and Baegok jam respectively. After degumming, crystallinity increased to 61.8% for Baegok jam. Before degumming, crystallinitics obtained from XRD were 35.9, 33.5, and 47.2%, for Nd-s jam, Nd$\^$H/ jam, and Baegok jam. After degumming, crystallinity increased to 49.8% for Baegok jam. The molecular weight of Nd$\^$H/ jam were 9,417 in 1 hr, 3,744 in 2 hr, 4,944 in hr, and 3,910 in 6 hr.

• Journal of the Korean Vacuum Society
• /
• v.20 no.6
• /
• pp.449-455
• /
• 2011

The luminescence properties of $In_{0.5}Ga_{0.5}As/In_{0.5}Al_{0.5}As$ multiple quantum wells (MQWs) grown on $In_{0.4}Al_{0.6}As$ buffer layer have been investigated by using photoluminescence (PL) and time-resolved PL measurements. A 1-${\mu}m$-thick $In_{0.4}Al_{0.6}As$ buffer layers were deposited at various temperatures from $320^{\circ}C$ to $580^{\circ}C$ on a 500-nm-thick GaAs layer, and then 1-${\mu}m$-thick $In_{0.5}Al_{0.5}As$ layers were deposited at $480^{\circ}C$, followed by the deposition of the InGaAs/InAlAs MQWs. In order to study the effects of $In_{0.4}Al_{0.6}As$ layer on the optical properties of the MQWs, four different temperature sequences are used for the growth of $In_{0.4}Al_{0.6}As$ buffer layer. The MQWs consist of three $In_{0.5}Al_{0.5}As$ wells with different well thicknesses (2.5-nm, 4.0-nm, and 6.0-nm-thick) and 10-nm-thick $In_{0.5}Al_{0.5}As$ barriers. The PL peaks from 4-nm QW and 6-nm QW were observed. However, for the MQWs on the $In_{0.4}Al_{0.6}As$ layer grown by using the largest growth temperature variation (320-$580^{\circ}C$), the PL spectrum only showed a PL peak from 6-nm QW. The carrier decay times in the 4-nm QW and 6-nm QW were measured from the emission wavelength dependence of PL decay. These results indicated that the growth temperatures of $In_{0.4}Al_{0.6}As$ layer affect the optical properties of the MQWs.

• Childhood Kidney Diseases
• /
• v.17 no.2
• /
• pp.101-109
• /
• 2013

Purpose: Pediatric urolithiasis is uncommon in children but is a cause of significant morbidity and damage to the kidney. Although much information on adult urolithiasis is available in the literature, large studies on the pediatric population are still scarce. In this report, we review our experience with pediatric urolithiasis over 22 years at a tertiary referral center. Method: We retrospectively reviewed the records of children with newly diagnosed urolithiasis between January 1991 and May 2013. We assessed the age, sex, family history, initial symptoms, location of stones, underlying cause, stone analysis, treatment, and recurrence among the patients. Results: In total, 137 patients (96 male, 41 female) were assessed. The age range was 0-17 years (mean age, 6.0 years). Forty-three (31%) children were aged <1 year, and 37% (16/43) had a history of intensive care unit (ICU) admission. Thirteen patients (9.5%) had a family history of stones. The most common symptoms at presentation among the patients were gross hematuria (56/137, 41%) and flank or abdominal pain (46/137, 34%). The stones were located in the kidney (85/137, 62%), ureter (29/137, 21%), bladder (2/137, 1.4%), and multiple locations (20/137, 15 %). Congenital abnormalities of the genitourinary (G-U) tract, with or without metabolic abnormality, or urinary tract infection (UTI) was detected in 26 children (19%). Ninety-one patients (66%) underwent metabolic examination, and 38% of these patients exhibited an abnormality. UTI, with or without abnormalities of the G-U tract, or metabolic abnormality was detected in 26 children (19%). Of the 35 stones analyzed, the majority were calcium stones (20/35, 57%), followed by infected stones (5/35, 14%), uric acid stones (4/35, 11%), carbonate apatite stones (3/35, 7%), cystine stones (2/35, 6%), and phosphate stones (1/35, 3%). Five patients (4%) required open procedures, with or without non-open procedures, whereas 77 patients (56%) were managed conservatively; the remaining 55 patients (40%) received some other form of intervention. Eighteen patients (13%) had stone recurrence during the follow-up period. Conclusions: Pediatric urolithiasis is commonly associated with abnormalities of the G-U tract and/or metabolic disorders and/or UTI. Half of the patients will pass their stones spontaneously, and all the techniques of minimally invasive surgery are applicable in the treatment of children with stones. As the recurrence rates are high among this population, long-term follow-up is recommended and the complete clearance of stones is important.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.24 no.1
• /
• pp.33-38
• /
• 2020

Purpose Vitamin D is essential for maintaining bone health, controling cell proliferation or differentiation, strengthening immune function by controlling calcium metabolism in the body. Vitamin D deficiency can lead to increase the risk of rickets, osteoporosis, cardiovascular disease, diabetes and cancer. Especially, South Korea is one of the highest population proportion of vitamin D deficiency. Accurate determination of levels of 25-OH-VitD or 25-OH-VitD3 in blood serum is required for the diagnosis and treatment of vitamin D deficiency. In this study, radioimmunoassay of 25-OH-VitD and 25-OH-VitD3 was performed and compared to evaluate the effectiveness of Vitamin D radioimmunoassay. Materials and Methods Serum 25-OH-VitD and 25-OH-VitD3 levels were measured using radioimmunoassay. The interrelationship, reproducibility and population distribution rate were evaluated. In addition, the internal quality control was performed at Asan Medical Center from April 2017 to June 2019 and the result of external quality control (Interagency proficiency evaluation) of first and second half of 2018 hosted by the Korean Society of Nuclear Medicine Technology (KSNMT). Both tests were measured by same manufacturer's reagent. Results 25-OH-VitD showed a strong positive correlation on 97 samples, as 25-OH-VitD3 x 0.9 + 0.3 (R>0.9). In repeated measurement, the average Diff(%) value of the reproducibility evaluation of 25-OH-VitD and 25-OH-VitD3 were 7.7% and 7.4%, respectively. Population distribution results showed no statistically significant differences(p>0.05). The resultant value of internal quality control, which measured from April, 2017 to June 2019 in Blood test room of Nuclear Medicine at Asan Medical Center, showed average (CV%) 6.2% and 6.8%, respectively. As a result of the external quality control (interagency proficiency evaluation) Z value obtained under 2.0, as shown below; Conclusion The interrelationship, reproducibility, population distribution rate, internal quality control and external quality control between 25-OH-VitD and 25-OH-VitD3 radioimmunoassay shows superior outcome. Radioimmunoassay, which can be alone measured in the blood as 25-OH-VitD or 25-OH-VitD3, is considered suitable screening tests for the diagnosis of vitamin D deficiency.

• Korean Journal of Food Science and Technology
• /
• v.46 no.3
• /
• pp.334-340
• /
• 2014

Toxin-producing Bacillus cereus is the causative agent of two different types of food poisoning: the emetic and the diarrheal types. This study was conducted to investigate the presence of enterotoxin and emetic toxin genes in 263 B. cereus isolated from 619 different ready-to-eat food items. Hemolytic enterotoxins hblA, hblC, and hblD were detected in 85.6, 41.1, and 76.8%, respectively, of the B. cereus isolates. About 67.0% (175/263) of the isolates presented all of three genes. Non-hemolytic enterotoxins nheA, nheB, and nheC were detected in 100, 97.0, and 68.4% of the isolates, respectively. Approximately 90.0% (236/263) of the isolates presented all of these three non-hemolytic enterotoxin genes. Emetic toxin gene, CER, was detected in 132 of 263 (50.2%) isolates. Computer-assisted cluster analysis of Rep-PCR profiles showed a high genetic diversity among the isolates. All B. cereus isolates from food samples tested in this study carried at least 6 of 10 toxin genes.

• Journal of Mushroom
• /
• v.19 no.3
• /
• pp.234-245
• /
• 2021

To extend the shelf life of king oyster mushrooms for export, we investigated the impacts of mushroom quality grade, fruiting body trimming, and packaging method (tray container sealed packaging vs string-tied OPP bag packaging). Quality is divided into two grades: 1^st grade, which is mushrooms adapted by lowering the cultivation temperature to 9~11℃, and 2^nd grade, mushrooms held at 13~15℃ prior to harvest. Using selected 1^st and 2^nd grade mushrooms, 3 treatments were carried out to assess effects of trimming and packaging method. Test groups included 1) trimming plus string-tied OPP bag packaging (Cut & OPP), 2) no trimming plus string-tied OPP bag packaging (Uncut & OPP), and 3) trimming plus tray container sealing packaging (Cut & Tray). Gas composition inside the packaging, changes in quality factors, and sensory evaluation for fresh quality were performed over 42 days of 0℃ storage. Overall freshness was best maintained in the following order: Cut & Tray > Cut & OPP > Uncut & OPP for both 1^st and 2^nd grade mushrooms. The shelf-life of 1st grade mushrooms was about 30 days for Cut & Tray, 28 days for Cut & OPP, and 21 days for Uncut & OPP. The shelf-life of 2^nd grade mushrooms was about 22 days for Cut & Tray, 17 ays for Cut & OPP, and 14 days for Uncut & OPP. Factors affecting fresh mushroom quality included browning of cap and stalk, and mushroom decay index. Browning of the lower part of the stalk, with related color change as noted in a^* and b^* values were the main factors indicating quality deterioration of king oyster mushrooms.

• Journal of Life Science
• /
• v.31 no.7
• /
• pp.626-630
• /
• 2021

This study was conducted to examine the association between the myosin heavy chain 3 (MYH3) in 6-bp deletion variant genotypes and meat color traits in a crossbred pig population Landrace and Jeju native black pigs (JNBP). The longissimus dorsi, semimembranosus, triceps brachii and biceps femoris muscle from each carcass were used for the analysis of meat color traits. A total of 187 pigs and three meat color traits, CIE L^* (lightness), CIE a^* (redness), and CIE b^* (yellowness), were analyzed. All experimental pigs were successfully genotyped for the MYH3 6-bp deletion variant using Polymerase chain reaction (PCR) analysis. We detected three MYH3 6-bp deletion variant genotypes qq, Qq, and QQ with 0.091, 0.551 and 0.358 genotype frequencies, respectively. Compared to qq homozygotes, the MYH3 6-bp deletion QQ genotype animals showed a higher levels of the meat colors traits CIE L^* (lightness), CIE a^* (redness), and CIE b^* (yellowness) in longissimus dorsi (p>0.05, p<0.001, p<0.001), semimembranosus (p>0.05, p<0.001, p<0.001), triceps brachii (p<0.001, p<0.001, p<0.001), and biceps femoris (p<0.01, p<0.001, p<0.001), respectively. The QQ genotype pigs was associated with increasing meat color traits in the crossbred between Landrace and JNBP. Our findings suggest that the MYH3 6-bp deletion variant genotypes can be used as valuable genetic markers for JNBP-related breeding programs to improve meat quality and control meat color traits.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.2
• /
• pp.72-80
• /
• 2019

Purpose: The purpose of this study is to compare and analyze the shear bond strength and fracture pattern in different enamel tooth surface treatments for resin splinting materials. Materials and Methods: G-FIX and LightFix were used as tooth splinting materials. Twenty bovine mandibular incisors were used for the preparation of the specimens. The exposed enamel surface was separated into four parts. Each tooth was treated with 37% phosphoric acid, 37% phosphoric acid + adhesive resin, 37% phosphoric acid + G-premio bond, and G-premio bond for each fraction. Shear bond strength was measured using a universal testing machine. After measuring the shear bond strength, the fractured surface of the specimen was magnified with a microscope to observe the fracture pattern. Two-way ANOVA was used to verify the interaction between the material and the surface treatment method. One-way ANOVA was used for comparison between the surface treatment methods of each material and post-hoc test was conducted with Scheffe's test. An independent t-test was conducted to compare shear bond strengths between materials in each surface treatment method. All statistics were conducted at 95% significance level. Results: G-FIX, a tooth splinting resin, showed similar shear bonding strength when additional adhesive resins were used when material was applied after only acid etching, and LightFix showed the highest shear bonding strength when additional adhesive resins were used after the acid etching. In addition, both G-FIX and LightFix showed the lowest shear bond strength when only self-etching adhesive was applied without additional acid etching. Verification of interactions observed interconnection between resins and surface treatment methods. Most of the mixed failure was observed in all counties. Conclusion: When using G-FIX and LightFix, which are tooth-splinting materials, it is considered that sufficient adhesion will be achieved even after applying only acid etching as instructed by the manufacturer.

• Clean Technology
• /
• v.25 no.3
• /
• pp.231-237
• /
• 2019

The BOD removal efficiency according to HRT of the continuous inflow SBR process was decreased from 92.1 ~ 96.0% at HRT 9 ~ 15 h to 86.9 ~ 90.7% at HRT 6 h, but a stable removal efficiency was shown up to HRT 6 h. The T-N removal rate was decreased to 80.1 ~ 87.9% at HRT 12 ~ 15 h, to 71.9 ~ 87.0% at HRT 9 h, and to 60.1 ~ 65.7% at HRT 6 h. As a result of the test of removing organic matter and nitrogen, the optimum HRT of the continuous inflow SBR reactor is determined as 9 h. The TCODcr removal efficiency was 88.4 ~ 96.0% and the TBOD removal efficiency was 92.1 ~ 98.1% as a result of examination of organic matter removal efficiency according to a change in the recycling rate (1 ~ 5Q) at HRT 9 h, suggesting that the a change in the recycling rate has a minimal effect on the removal of organic matter. The T-N removal efficiency was 70.3 ~ 80.4% at 1 ~ 2Q, 77.2 ~ 85.6% at 3Q and 61.5 ~ 80.8% at 4 ~ 5Q according to a change in the recycling rate. The TP removal efficiency was reduced to 75.0 ~ 84.6% at 1 ~ 4Q and to 63.3 ~ 72.4% at 5Q. This is presumably because the release and ingestion of phosphorus (P) by microorganisms is not performed smoothly at 5Q or more. Therefore, the optimum recycling rate for removing organic matter and nutrients was found to be 3Q.

• Journal of Nutrition and Health
• /
• v.53 no.6
• /
• pp.596-612
• /
• 2020

Purpose: This study was conducted to evaluate the dietary behaviors of preschool children using the nutrition quotient for preschoolers (NQ-P) and investigate factors that influence NQ-P in preschool children. Methods: Subjects were 214 parents with children aged 3-5 years residing in Busan and Gyeongnam, Korea. The survey was conducted from March to April, 2019 using a questionnaire that included demographic characteristics, the NQ-P questions, and health consciousness. All data was statistically analyzed by the SPSS program (Ver 25.0) and the statistical differences in variables were evaluated by the chi-square test, Fisher's exact test, t-test, one-way ANOVA, and Tukey's multiple comparison test. Results: The mean score of NQ-P of the total subjects was 58.28, which was within the medium-low grade. The mean score of 'balance' was 60.08, 'moderation' was 47.64, and 'environment' was 67.83. The analysis of related-factors influencing NQ-P scores showed that there was a significant difference according to the frequency of dining out. The scores of the NQ-P (p < 0.05), moderation (p < 0.001), and environment (p < 0.05) were significantly higher in the 1-2 times per week group compare to 3-4 times and 5-6 times per week group. The scores of NQ-P (p < 0.01), environment (p < 0.01) were significantly higher in the high group of parents' health consciousness compared to the those with low health consciousness. Conclusion: According to the results of the evaluation by NQ-P, the dietary behaviors of preschool children residing in Busan and Gyeongnam need to be improved and monitored. For improving their eating behavior and nutritional health status, preschool children and their parents need proper nutrition education programs.