• New & Renewable Energy
• /
• v.1 no.4 s.4
• /
• pp.19-24
• /
• 2005

수소 여과용 치밀질 membrane의 제조는 기존의 SC($SrCeO_3$)보다 높은 여과특성을 가지는 BC($BaCeO_3$)구조의 재료를 이용하여 시편을 제조하였고, 시편의 물성은 기공율, 수분에 대한 내구성 그리고 여과 특성을 측정하였다. 우선 열적 안정성 및 수분에 대한 내구성 향상은 $Y_2O_3$를 0.1mol첨가 하였을 때 1% 이내의 기공율을 가지고 있었으며 수분에 대한 안정성을 위해 boiling test에서도 균열이 발생되지 않고 안정적인 것을 확인할 수 있었다. 또한 여과 특성을 향상시키기 위해 Ce과 치환이 가능하고 전도성을 향상시킬 수 있는 $Ga_2O_3$, $La_2O_3$을 치환하여 물성을 측정한 결과 $Ga_2O_3$은 0.05, $La_2O_3$ 0.1mol%가 최적이었으며, 이들 중 $Ga_2O_3$가 0.05mol 첨가 되었을 때 가장 높은 이온 전도도 값을 얻었으며, $La_2O_3$이 첨가된 경우가 다음으로 높게 나타났다. 전자 전도성을 높이기 위하여 Pt를 sol로 만들어 나노 입자로 분산 시키는 방법으로 실험을 실시 $500^{\circ}C$ 이상의 온도에서는 복합전도에 의해 전도도가 향상되어지는 것을 확인할 수 있다. 또한 이들 시편의 여과 특성을 측정한 전도도 측정의 결과와 동일한 결과를 얻을 수 있었다.

• Membrane Journal
• /
• v.19 no.2
• /
• pp.89-95
• /
• 2009

A comb-like copolymer consisting of a poly(vinyl chloride) backbone and poly(hydroxy ethyl acrylate) side chains, i.e. PVC-g-PHEA, was synthesized through atom transfer radical polymerization (ATRP). This comb-like copolymer was crosslinked with 4,5-imidazole dicarboxylic acid (IDA) via the esterification of the -OH groups of PHEA in the graft copolymer and the -COOH groups of IDA. Upon doping with phosphoric acid (PA, $H_3PO_4$) to form imidazole-PA complexes, the proton conductivity of the membranes continuously increased with increasing PA content. A maximum proton conductivity of 0.011 S/cm was achieved at $100^{\circ}C$ under anhydrous conditions. The PVC-g-PHEA/IDA/PA complex membranes exhibited good mechanical properties, i.e. 575 MPa of Young's modulus, as determined by a universal testing machine (UTM). Thermal gravimetric analysis (TGA) shows that the membranes were thermally stable up to $200^{\circ}C$.

• Membrane Journal
• /
• v.16 no.4
• /
• pp.276-285
• /
• 2006

Acid-doped sulfonated poly(aryl ether benzimidazole) (S-PAEBI) copolymers were synthesized by a direct polymerization technique and a doping with phosphoric acid as a dopant, and the polymer electrolyte membranes were fabricated from them by a solution casting method. To optimize the reaction condition, the degree of sulfonation and doping level were varied in the ranges of $0{\sim}60%\;and\;0.7{\sim}5.7$, respectively. Physiochemical properties of the doped membranes were investigated by AFM, TGA and the measurement of proton conductivity. It was found that proton conductivities depend on doping levels of membranes. Conductivity determined at the condition of $130^{\circ}C$ and no humidity was $7.3{\times}10^{-2}S/cm$ for the $H_3PO_4$-doped PAEBI membrane with a doping level of 5.7.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.195-196
• /
• 2009

술폰화 폴리아릴렌에테르술폰 공중합체를 기본구조로 한, 6F OH를 알코올 단량체로 사용하여 블록 공중합체를 직접 중합법으로 합성하였다. 이때 각각의 소수성-친수성 소중합체들은 동일한 분자량을 이용하여 합성했으며 그때의 두 소중합체의 몰비는 1:1로 하여 블록 공중합체의 술폰화도를 50%로 고정하였다. N-메틸-2피롤리돈(NMP) 용매 상에서 연료전지용 고분자 전해질 막을 제조하여 이온전도도 및 메탄올 투과도등의 측정을 통하여 최종 블록 공중합체 전해질 막의 기본 특성을 파악했다. 소수성-친수성 소중합체의 분자량을 조절함에 따라 최종 전해질 막의 이온 전도도를 향상시킬 수 있음이 확인되었고, 연료전지 성능 테스트 결과에서도 나피온(Nafion 115)과 비슷한 성능을 보였다.

• Membrane Journal
• /
• v.34 no.2
• /
• pp.154-162
• /
• 2024

Anion exchange membranes (AEMs) are essential components in water electrolysis systems, serving to physically separate the generated hydrogen and oxygen gases while enabling the selective transport of hydroxide ions between electrodes. Key characteristics sought in AEMs include high ion conductivity and robust chemical and mechanical stability in alkaline. In this study, quaternized Poly(terphenyl piperidinium)/cellulose nanocrystals (qPTP/CNC) mixed matrix membrane was fabricated. The polymer matrix, PTP, was synthesized via super-acid polymerization, known for its excellent ion conductivity and alkaline durability. The qPTP/CNC membrane showed a dense and uniform morphology without significant voids or large aggregates at the polymer-nanoparticle interface. The qPTP/CNC membrane containing 2 wt% CNC demonstrated a high ion exchange capacity of 1.90 mmol/g, coupled with low water uptake (9.09%) and swelling ratio (5.56%). Additionally, the qPTP/CNC membrane showed significantly lower resistance and superior alkaline stability (384 hours at 50℃ in 1 M KOH) compared to the commercial FAA-3-50 membrane. These results highlight the potential of hydrophilic additive CNC in enhancing ion conductivity and alkaline durability of ion exchange membranes.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.337-343
• /
• 2013

Membrane reactors have been showing a promising future and attracted increasing attention in the scientific community as they possess advantages in terms of enhanced catalytic activity and selectivity, combination of processes (reaction and separation), simplicity in process design, and safety in operation. In particular, solid electrolyte membrane reactor principles are realized in fuel cells, electrolyzers and reactors for hydrogenation of carbon dioxide and other economically viable reactions. In this review, as a young generation of ion conducting materials, high temperature proton conductors are discussed in terms of the current status of material development and their various applications.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.2
• /
• pp.94-102
• /
• 2014

Cation exchange membrane (Nafion) was modified to reduce the vanadium ion permeation through the membrane and to increase the vanadium redox flow battery (VRB) system performance by coating the graphene oxide (GO) which has nano-plate like morphology. Modified membrane properties were studied by measuring the ion exchange capacity (I.E.C), water uptake and proton conductivity. The thickness of the coated layer on the surface of the Nafion membrane was observed as $0.93{\mu}m$ by SEM. Proton conductivity and vanadium ion permeability of the modified membrane were decreased to 27% and 25% compared to that of the commercial Nafion membrane respectively. VRB single cell performance test was performed to compare the system performance of the VRB applied with commercial Nafion membrane and modified membrane. VRB system applied with modified membrane showed higher coulombic efficiency and energy efficiency than the VRB system applied with the commercial Nafion membrane due to the reduction of the vanadium ion permeation. From these result, we could suggest that the membrane modification by coating the GO on the surface of the Nafion membrane could be one of the promising strategies to reduce the vanadium ion permeation and to increase the VRB system performance effectively.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.1
• /
• pp.22-32
• /
• 2008

Because of an emerging importance of clean energy, fuel cells are attract more attention due to their ability to produce high efficient power without any harmful emission. Fuel cells are energy conversion device with directly convert chemical energy into electrical energy by the chemical reactions, which have potential applications in automobile, spacecraft, stationary, industrial and home appliances. Recently there are gaining demand to develop an intermediate temperature fuel cell and available proton conductors at $200{\sim}500^{\circ}C$, which promising operating temperatures range for both material science and energy conversion processes. In this paper, we have reviewed electrochemical properties and current technology of solid state proton conductors. In addition, development of intermediate temperature fuel cell using the perovskite-type solid protonic conductor is also discussed.

• Membrane Journal
• /
• v.26 no.2
• /
• pp.135-140
• /
• 2016

In this study, the organic-inorganic composite membranes composed of iron oxide (Ferroxane) and Nafion were developed as an alternative proton exchange membranes (PEMs) in proton exchange membrane fuel cell (PEMFC). Acetic acid-stabilized lepidocrocite (${\gamma}$-FeOOH) nanoparticles (ferroxane) was synthesized, and the ferroxane-Nafion composite membranes were prepared by mixing Nafion with the ferroxane. The composite membranes were investigated in terms of ionic conductivity, ion exchange capacity (IEC), FT-IR, thermal stability, etc. As a result, the ferroxane-Nafion composite membranes showed higher proton conductivity, IEC, thermal stability than Nafion recast membranes. The proton conductivity and IEC of the composite membrane with the best performance were $0.09S\;cm^{-1}$ and $0.906meq\;g^{-1}$, respectively.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.3
• /
• pp.331-337
• /
• 2006

높은 이온전도도와 충분한 기계적 강도, 전해질 누수가 적은 새로운 형태의 고분자 전해질막(pore-gel SPE)을 연구 개발하였다. 다공성 PVDF-HFP 고분자막의 기공 내에 전해질 용액을 흡수시킨 후 막 내에서 젤화를 진행시켰다. 전해질 용액은 2:2:1의 비를 갖는 PC/EC/DMA에 1M SA(Salicylic acid)를 용해하고 여기에 고분자막을 용해시킬 수 있는 아세톤을 첨가하였다. 초음파를 이용함으로써 고분자막의 용액 흡수율을 증가시키고 또 고분자막에서 젤화를 촉진 시킬 수 있었다. 이렇게 젤화한 막의 이온전도도는 젤화 전 막보다 $1{\sim}2.2$ 배 향상되었고, 인장강도는 gel-type SPE 보다 40 배 증가하였으며, 전해질 누수실험결과 hybrid-type SPE는 13%의 누수를 보였으나 본 연구의 막(pore-gel SPE)은 6%로 감소함을 보였다.