• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.19-27
• /
• 2015

As the recent regulation of Internaional Maritime Organization (IMO) is enforced, the advanced technology of Ballast water treatment system (BWTS) is needed to meet its requirements. Until now, there are two kinds of the BWTS technologies such as physical methods (Membrane and UV) and chemical methods (Chlorin and Ozone). However, these conventional methods have some limitations of auxiliary power, low productivity, residual treatment and etc. In order to overcome these problems, this paper introduces the new kind of BWTS based on mechanical principle and investigates the effect of rotating disc shapes on flow characteristics between rotating and stationary discs by computational fluid dynamics (CFD). Planar and Step types can make the local cavitation generated along radius, and Circular type can increase the intensity of shear stress.

• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.905-910
• /
• 2007

As the ship is getting bigger and faster lately, ship's structure or cargoes might be often damaged and the ship might be cut in two in extreme conditions by a wave impact on its bow. In this paper, the vertical acceleration, which is one of factors for evaluating seakeeping performance, was measured under the various sea states by the hull stress monitoring system(HMS) on the bridge, and the result was compared with those of model test and theoretical studies. Then, we confirmed the seakeeping performance of T.S. HANBADA by comparing it with ITTC seakeeping criteria This result will be a great help for the safe navigation by making it possible to estimate the possibility of work and the amount of risk under the various sea conditions with which may be confronted, and the shipbuilding yard can be possible to construct the vessel with superior performance through these data measured on the actual ship.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.482-488
• /
• 2018

Generally, after stern tube bearing shows a significant increase in local load due to propeller load, which increases the potential adverse effects of bearing failure. To prevent this, research on regarding shaft alignment has been carried out with a focus on reducing the relative slope between the shaft and support bearing(s) under quasi-static conditions. However, for a more detailed evaluation of a shafting system, it is necessary to consider dynamic conditions. In this context, the results revealed that eccentric propeller force under transient conditions such as a rapid rudder turn at NCR, lead to fluid-induced instability and imbalanced vibration in the stern tube. In addition, compared with NCR condition, it has been confirmed that eccentric propeller forces given a rapid rudder starboard turn can lift a shaft from the stern tube bearing in the stern tube, contributes to load relief for the stern tube bearing.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.489-497
• /
• 2019

A ship operating under rough sea conditions is exposed to a slamming load due owing to its motion relative to encountered waves. In the process of reentering the water, the ship's structure is temporarily subjected to an impact pressure. In particular, bow flare slamming often occurs in large container ships with a large flare angle, and can cause structural damage. Numerical simulations were performed in this study, and the results were compared with reliable experimental results. The simulation results were also used to estimate the bow flare slamming pressures on a container ship under head sea and oblique sea conditions. It was found that a maximum impact pressure of 475 kPa was generated near the 0.975 station of the container ship under a head sea condition.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.1
• /
• pp.52-59
• /
• 2012

Among many factors to be considered for higher safety level requirements, the hull stability in intact and damaged conditions in seaways is of utmost importance. Since the assessment of a damaged ship is complicated due to the highly non-linear behavior, it is widely acknowledged that computational fluid dynamics (CFD) methods are one of the most feasible approaches. Although many research activities are being reported on the damaged ship stability recently, most of them are not designed for validation of CFD studies. In this study, well-designed model tests were performed to build a CFD validation database, which is essential in developing better CFD methods for the damage stability assessment. The geometry of the damaged compartment and test conditions were determined based on preliminary CFD simulations. Free roll decay tests in calm water with both intact and damaged ships were performed and the roll motion characteristics were compared. The damaged ship showed a larger roll damping coefficient and more rapid decrease of roll amplitude than the intact ship. The primary reason of these efforts can be explained by the movement of the flooded water.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.1
• /
• pp.33-41
• /
• 2019

Estimating fatigue damage is a very important issue in the design of ships. The springing and whipping response, which is the hydro-elastic response of the ship, can increase the fatigue damage of the ship. So, these phenomena should be considered in the design stage. However, the current studies on the the application of springing and whipping responses at the design stage are not sufficient. So, in this study, a prediction method was developed using fluid-structural interaction analysis to assess of the fatigue damage induced by springing and whipping. The stress transfer function (Stress RAO) was obtained by using the 3D FE model in the frequency domain, and the fatigue damage, including linear springing, was estimated by using the wide band damage model. We also used the 1D beam model to develop a method to estimate the fatigue damage, including nonlinear springing and whipping by the vertical bending moment in the short-term sea state. This method can be applied to structural members where fatigue strength is weak to vertical bending moments, such as longitudinal stiffeners. The methodology we developed was applied to 325K VLOC, and we analyzed the effect of the springing and whipping phenomena on the existing design.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.2
• /
• pp.225-231
• /
• 2013

Liquefied gas carriers generally transport cargoes of flammable or toxic nature. Since these cargoes may cause an explosion, fire or human casualty, the accommodation spaces, service spaces and control stations of liquefied gas carriers should be so located as to avoid ingress of gas. For this reason, the paragraph 8.2.9 of IGC Code in IMO requires that the height of vent exits should be not less than B/3 or 6 m whichever is greater, above the weather deck and 6 m above the working area and the fore and aft gangway to prevent any concentration of cargo vapor or gas at such spaces. Besides as known, the LNG market has been growing continually, which has led to LNG carriers becoming larger in size. Under this trend, the height of a vent will have to be raised considerably since the height of a vent pipe is generally decided by a breadth of a corresponding vessel. Accordingly, we have initiated an examination to find an alternative method which can be used to determine the safe height of vent masts, instead of the current rule requirement. This paper describes the dispersion characteristics of boil-off gas spouted from a vent mast under cargo tank cool-down conditions in the membrane type LNG carriers.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.169-174
• /
• 2007

A huge marine accident causes a loss of valuable lives, property and the serious environmental contamination. In the IMO, active discussions about a potential occurrence possibility of marine accidents and appropriate place(place of refuge) to minimize the damage are being developed as appropriate transferring vessels which has a worry of a secondary marine environmental pollution from a previous marine accident Our country has a great potential et marine accidents due to the foreign vessel in distress because there is a huge vessel traffic amounts of the passage since which locate with in the important navigation connects the Asian region. and North America centering around north Pacific Ocean Also, we need the minimize the secondary damage from accident which occurs in domestic ports as transferring safe쇼 place when it is needed In this paper, analyzed and investigated a designated the place of refuge that analyze foreign cases, and will make a efficient and reasonable investigating plan of interior place of refuge.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.557-565
• /
• 2021

Path-following control is considered as one of the most fundamental skills to realize autonomous navigation of marine vessels in the ocean. This study addresses with the path-following control for a ship in which there are environmental disturbances in the directions of the surge, sway, and yaw motions. The guiding principle and back-stepping method was utilized to solve the ship's tracking problem on the reference path generated by a virtual ship. For path-following control, error dynamics is one of the most important skills, and it extends to the research fields of automatic collision avoidance and automatic berthing control. The algorithms for the guiding principles and error variables have been verified by numerical simulation. As a result, most error variables converged to zero values with the controller except for the yaw angle error. One of the most interesting results is that the tracking errors of path-following control between two ships are smaller than the existing safe passing distances considering interaction forces from near passing ships. Moreover, a trade-off between tracking performance and the ship's safety should be considered for determining the proper control parameters to prevent the destructive failure of actuators such as propellers, fins, and rudders during the path-following of marine vessels.

• Journal of Navigation and Port Research
• /
• v.43 no.3
• /
• pp.186-196
• /
• 2019

Berthing energy is majorly influenced by the berthing velocity. It is necessary to design an appropriate berthing velocity for each pier, since excessive berthing velocity can cause berthing accident causing damage to the ship and pier. In this study, as a statistical approach for berthing velocity, the probability distributions suitable for the berthing velocities were confirmed using the K-S test, the A-D test and the Q-Q plot. As a result, the frequency distribution of the berthing velocity was found to be suitable using the Weibull distribution as well as the lognormal distribution. Additionally, the predicted values obtained through estimation of the berthing velocity using the concept of probability of exceedance in this study is proposed as a reference of design berthing velocity. It can be observed that the design berthing velocity is set to be somewhat low so that it does not practically match with the reality. This study and its results can be expected to contribute to the development of a proper design velocity calculation method.