• Korean Journal of Breeding Science
• /
• v.42 no.1
• /
• pp.75-86
• /
• 2010

End-use properties of 26 Korean wheat cultivars (KWC) were evaluated to assess consumer satisfaction with 6 imported wheat and 5 commercial wheat flours. In end-use quality testing of cooked noodles, Absorption of noodle dough sheet of ASW (Australian standard white) was similar to Anbaek, Eunpa, Gobun, Hanbaek, Jeokjoong, Jonong, Namhae, and Sukang. Thickness of noodle dough sheet of KWC was showed thin difference. In imported wheat and commercial flour, Commercial flour for baking cookie (Com5) with lower protein flour was lower than those flours. In lightness of prepared noodle dough sheet, Lightness value ($L^*$) of KWC was lower than those of Commercial flour for making white salted noodle (Com1), commercial flour for making for yellow alkaline noodle (Com2), and commercial flour for multi-purpose (Com4). Lightness value ($L^*$) showed significantly negative correlations with particle size of flour, ash, damaged starch, and protein content. Hardness of cooked noodles positively correlated with protein content. In texture of cooked noodles, Hardness of Com1 was similar to that of Alchan, Dahong, Jeokjoon, and Sukang. Also, hardness of Com2 was similar to that of Gobun, Jokyung, Jonong, Keumkang, and Namhae. In end-use quality of bread, bread loaf volume of commercial flour for making bread (Com3) was similar to Alchan, Jokyung, Keumkang, and Namhae but firmness was low. Bread volume showed better relationships with higher SDS-sedimentation volume, longer mixing time of mixograph, higher height of dough during development. Firmness of crumb was negatively correlated with bread volume. Diameter of cookie showed significantly negative correlations with particle size of flour, damaged starch, and protein content. Also, Top gain score became higher as the increase diameter of cookie. In end-use quality testing of cooked cookie, Cookie diameter of Com5 was similar to that of Dahong, Geuru, Olgeuru, Tapdong, and Uri but top grain was low.

• Conservation Science in Museum
• /
• v.19
• /
• pp.1-18
• /
• 2018

The Stele for National Preceptor Hongbeop from the Jeongtosa Temple site in Chungju is one of the most important stone cultural heritage items for exemplifying the style of the Goryeo era. Despite its obvious value, this relic has been stored in a weathered condition at the National Museum of Korea. It had suffered various dismantling and displacements during the Japanese colonial period and had long been exposed in the open air. The stele was selected as a subject for the Stone Monuments Restoration Project launched by the National Museum of Korea in 2015. In preparation for its outdoor exhibition as part of the restoration project, this study investigated the characteristics of its materials, produced a map of its deterioration from weathering, and carried out ultrasonic analysis of the materials to provide findings useful for conservation treatment. The materials analysis revealed that the turtle-shaped pedestal of the stele was made from two-mica granite consisting of medium-grained quartz, plagioclase, alkali feldspar, biotite, and muscovite. Its body stone is crystalline marble, the rock-forming mineral in which is medium-grained calcite in a rose-pink color with dark grey spots. The dragon top of the stele is made of crystalline marble, the major component of which is medium-grained calcite of a light-grey color. The deterioration consists of 21.5% abrasion on the stone body, with its south face most damaged, and 18.6% granular disintegration, with the north face most damaged. The ultrasonic material characterization conducted for mapping the general condition of weathering shows low values on the parts-assembly area of the turtle-shaped pedestal and on the upper portion of the stone body. It is considered that there is dislocation due to partial blistering and fracturing as well as to the differences in surface treatment. Prior to the outdoor exhibition of the stele, the surface was cleaned of contaminants and was consolidated based on the scientific investigation in order to prevent weathering from the external environment.

• Applied Microscopy
• /
• v.33 no.2
• /
• pp.145-154
• /
• 2003

The present study was designed to demonstrate ionic zinc in the rat nasal mucosa by means of zinc selenium autometallography ($ZnSe^{AMG}$). Rats were given sodium selenide either intraperitoneally (i.p) or intranasally (i.n). Prior to the i.n. administration the rats were anesthetized with pentobarbital sodium (30 mg/kg, i.p.). A thin plastic tube coupled to a Hamilton syringe was then inserted into the right nostril and $10{\mu}l$ of the solution was instilled. For the i.p. administration non-anesthetized rats were given $100{\mu}l$ of the sodium selenide solution (10 mg/kg). Control rats were instilled with saline. After 2 hrs survival, the rats were anaesthetized and transcardially perfused with 3% glutaraldehyde. The olfactory area was removed and put into same fixative. The nose was then sectioned ($30{\mu}m$) horizontally, autometallography (AMG) was performed according to Danscher et al. (1997). After silver enhancement, fine AMG grains were scattered in the whole length of the olfactory epithelium containing olfactory receptor neurons, sustentacular and basal cells. However, much higher concentration of the AMG grains occupied near the surface and in the basal region of the olfactory epithelium. Both groups of i.p. and i.n. administration showed almost same level in the concentration of the AMG grains. In i.n. group, few AMG grains were also found in olfactory nerves of the lamina propria, suggesting zinc transport into the olfactory bulb via olfactory axons. At the electron microscopic level, the AMG grains were most entirely found in the supporting cells of the olfactory epithelium, and they were mostly localized in lysosome-like organelles. The i.n. group showed various signs of tissue damage of the olfactory mucosa, where dense concentration of AMG grains were localized at crystalloid structures. The present study demonstrated dense population of ionic zinc in the rat olfactory epithelium. zinc may play a role in the olfactory functioin and in the pathogenesis of the neurodegerative disorders affecting nose.

• The Journal of Korean Society for Radiation Therapy
• /
• v.20 no.1
• /
• pp.45-53
• /
• 2008

Purpose: We are trying to analyze 130 patients' conditions by using our Helical Tomotherapy, which was installed in our center in Oct. 2007. We will be statistically approach this examination and analyze so that we will be able to figure out adaptive plans according to the change in place of the tumor, GTV (gross tumor volume), total amount of time it took, vector (${\upsilon}=\surd$x2+y2+z2) and the change in size of the tumor. Materials and Methods: Objectives were the patients who were medicated with Tomotherapy in our medical center since Oct. 2007 August 2008. The Average age of the patients were 53 years old (Minimum 25 years old, Maximum 83 years old). The parts of the body we operated were could be categorized as Head&neck (n=22), Chest (n=47), Abdomen (n=25), Pelvis (n=11), Bone (n=25). MVCT had acted on 2702 times, and also had acted on our adaptive plan toward patients who showed big difference in the size of tumor. Also, after equalizing our gained MVCT and kv-CT we checked up on the range of possible mistake, using x, y, z, roll and vector. We've also investigated on Set-up, MVCT, average time of operation and target volume. Results: Mean time on table was 22.8 minutes. Mean treatment time was 13.26 minutes. Mean correction (mm) was X=-0.7, Y=-1.4, Z=5.77, roll=0.29, vector=8.66 Head&neck patients had 2.96 mm less vector value in movement than patients of Chest, Abdomen, Bone. In increasing order, Head&neck, Bone, Abdomen, Chest, Pelvis showed the vector value in movement. Also, there were 27 patients for adaptive plan, 39 patients, who had long or multiple tumor. We could know that When medical treatment is one cure plan, it takes 32 minutes, and when medical treatment is two cure plan, it takes 40 minutes that one medical treatment takes 21 minutes, and the other medical treatment takes 19 minutes. Conclusion:With our basic tools, we could bring more accurate IMRT with MVCT. Also, through our daily image, we checked up on the change in tumor so that adaptive plan could work. It was made it possible to take the cure of long or multiple tumor, the cure in a nearby OAR, and the complicated cure that should make changes of gradient dose distribution.

• Journal of Korean Society of Forest Science
• /
• v.86 no.1
• /
• pp.69-79
• /
• 1997

The purpose of this study is to acquire essential data to reduce the amount of woody debris resulted from the debris flow. This research examined topographic characteristics of the channelbed affecting generation, movement and storage of woody debris and woody characteristics related to number, sizes, shapes, decay, storage direction to mountainous stream. 1. The number of woody debris had a tendency to increase in proportion to stream width, but it was hardly affected by longitudinal gradient of stream. Especially, the greater amount of woody debris was stored at wide section of the stream with compound channel, and it was found in deposits of channelbed rather than in the present channel. 2. Total woody debris over 10cm in diameter and over 2m in length was 402 units and storage number was 35.3 units per 100m of stream. Average diameter of breast height and length were 14cm and 4m, respectively. The woody debris appeared shorter in length and greater in diameter at down-stream than up-stream. 3. Since woody debris met sediments and bed-materials of great roughness in moving, the greater amount of woody debris without root was found in up-stream and down-stream, but deformed woody debris was discovered in upper stream. Decay of woody debris was more severe in down-stream and woody debris on rotting process was found down-stream. 4. Storage direction of woody debris was mainly parallel to center line of stream, and rate of parallel and perpendicularity was 276 and 126 units, respectively. But, as woody debris storing to the perpendicular direction was unstable, the traveling debris could easily be stored. Therefore, some counterplan was required to prevent the traveling woody debris. 5. Tree species of woody debris was mainly larch, which occupied about two third of total woody debris(256 units). The woody debris of larch is easy to move due to hitting of channelbed materials or lower channelbed fluctuation because the lower part of larch is weaker than its upper part. Therefore, the section of the tree species planting in the riparian vegetation needs much more carefulness.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.2
• /
• pp.225-231
• /
• 2013

Liquefied gas carriers generally transport cargoes of flammable or toxic nature. Since these cargoes may cause an explosion, fire or human casualty, the accommodation spaces, service spaces and control stations of liquefied gas carriers should be so located as to avoid ingress of gas. For this reason, the paragraph 8.2.9 of IGC Code in IMO requires that the height of vent exits should be not less than B/3 or 6 m whichever is greater, above the weather deck and 6 m above the working area and the fore and aft gangway to prevent any concentration of cargo vapor or gas at such spaces. Besides as known, the LNG market has been growing continually, which has led to LNG carriers becoming larger in size. Under this trend, the height of a vent will have to be raised considerably since the height of a vent pipe is generally decided by a breadth of a corresponding vessel. Accordingly, we have initiated an examination to find an alternative method which can be used to determine the safe height of vent masts, instead of the current rule requirement. This paper describes the dispersion characteristics of boil-off gas spouted from a vent mast under cargo tank cool-down conditions in the membrane type LNG carriers.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.53-53
• /
• 2017

연구목적: 국내 과일 산업의 한 단계 도약과 대외 경쟁력을 높이기 위해서는 수확작업의 기계화가 시급함. 이 연구는 국내외 과일 수확 기계화 현황과 문제점을 분석하고, 향후 수확작업 기계화 방향을 제시하고자 수행 수확기계 실용화 현황 및 고찰 (국내) 과일을 직접 수확이 아닌 수확 작업을 보조해주는 고지 작업기(수동형, 모터 진동형)와 고소 작업차가 대부분임. 수동형은 사과 감 등을 수확하지만, 작업능률이 낮고 작업자가 쉽게 피로하여 장시간 작업이 불가능하므로 실질적인 대안이 되지 못함. 진동형은 자체 동력을 이용하여 나무에 진동을 가하여 주로 대추 매실 등 소과류 수확에 이용되고, 수확능률은 우수하나 충격 손상이 많아 개선이 요구됨. 고소작업차는 동력원에 따라 충전식과 엔진식으로 구분되고, 충전식은 엔진식에 비해 진동 소음이 적어 쾌적하지만, 작업시간이 배터리 용량에 제한을 받음. 또한 작업대 작동방식에 따라 리프트형과 붐형으로 구분함. 리프트형은 리프트를 이용하여 작업대를 상하로 구동하는 방식으로 높은 위치의 과실 수확이 어렵고, 작업대 넓이 만큼의 작업 공간(과수간의 거리)이 필요함. 붐형은 필요한 곳으로 접근성이 우수하나 무거운 무게를 지탱하기 어렵기 때문에 본체를 무겁게 하거나 수시로 수확된 과일을 하차시켜야 함. (국외) 수확 후 가공되는 과일류와 포도 올리브 오렌지 매실 등 소과류 수확이 기계화되었지만, 사과 복숭아 등 신선과일은 아직도 외국의 값싼 노동자들에 의존하여 수확되고 있음. 현재 실용화된 수확 기계는 진동식 수확기계와 터널식 수확기계가 대표적임. 진동식은 집게형의 부착기를 나무 줄기에 고정한 후 트랙터 동력원으로 나무에 진동을 가하여 수확하고, 올리브 대추 등과 같은 소과류와 과피가 두꺼운 오렌지 등에 적용되고, 수확 작업능률이 매우 높으나 과일의 낙하 상처를 피할 수 없는 단점이 있음. 터널형은 규격화(과수 크기 및 형태, 재식거리)된 과수원에 잘 적응하도록 설계 제작되어, 과수 위를 지나가면서 내부에 설치된 진동장치와 컨테이너로 과일을 수확하고, 와인용 포도 수확기가 대표적임. 기계수확이 가능하도록 과수원 조성단계에서부터 재배양식(과수 좌우 및 전후 거리)을 기계의 제원(바퀴 간격, 작업부 간격 등)에 맞추어 재배함. 과일 수확로봇에 관한 연구는 활발하고 일부에서 실증시험단계에 있음. 결론: 구체적인 추진방향을 제시하면, 단기적으로는 과일 수확작업자의 작업편이성과 노동강도를 줄일 수 있도록 소형 저가 범용성이 우수한 보조기구/기계의 보급을 확대하고, 중장기적으로는 수확기계/수확로봇 개발을 위한 연구개발비 투자를 늘리는 동시에, 기계/로봇이 과수원에 잘 적응할 수 있도록 수형 재식거리 등 재배양식의 표준화가 추진되어야 함.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.277-294
• /
• 2010

The Seosanmaaesamjonbulsang (National Treasure No. 84) consists of light gray and coarse to mediumgrained biotite granite with partly developed pegmatite and quartz vein. The host rock is divided into dozens of rock blocks with various shape along irregular discontinuity plane. The evaluation results of discontinuity systems reveal that the host rock were exposed to instable sloping environments. Results of deterioration diagnosis show that the degree of damage has been made worse by physical weathering and surface discoloration laying stress on part that vertical and horizontal joints are massed. Generally, deterioration rate of the triad Buddha surface cover with 42.7%, however, the rate of physical weathering and surface discoloration are subdivided to 9.6% and 33.1%, respectively. Ultrasonic measurements indicate that the triad Buddha was reached highly weathered grade in general. And the rock material was weaken to show low velocity zone of 1,000m/s along irregular joint systems. Indoor and outdoor mean relative humidity of the shelter was recorded more than 70% during every season, and high frequency appears in high relative humidity range over 95%. Such environments seem to have produced dew condensation on the rock surface with rainfall and supply water, promoted physical, chemical and biological weathering along crack and joint, resulting in high permeation of water and percentage of water content. Therefore, it is judged that for scientific conservation of the triad Buddha it needs environment control through persistent preservation environment monitoring including water problem.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.403-413
• /
• 2015

This paper presents the cutter bit damage due to the rotation speed of shield TBM cutter head in the mixed ground. The efficient of cutter bits and disk cutter are very important for tunnelling in mixed ground. In particular, this research is focused on the performance of cutter bits during excavation in mixed ground which is consist of the weathered soil and rock formation. In order to carry out this research, the experimental works are prepared performed by using the scaled shield TBM cutter bits evaluation machine developed. The mixed ground is prepared considering with a scale effect of tunnel size. Three different rotation speeds of shield TBM cutter head (i.e. 2, 3, 4 rpm) are applied in the experimental work. The drag forces acting on the cutter bits are measured at each cutter bit during rotation of cutter head. It is also analysed the variation of drag forces due to the rotation speed of shield TBM cutter head. The results of this research are clearly shown that the drag forces acting on the cutter bits are jumped up at the boundary between weathered soil and rock. It is also indicated that the jamping drag forces are increased with increasing the rotation speed of the cutter head. It is found from the research that the higher rotation speed of shield TBM cutter head will be high risk in the mixed ground. It is, therefore, suggested that the use of lower rotation speed of shield TBM cutter head is recommended for reducing the cutter bit damage in practice.

• Journal of Chest Surgery
• /
• v.39 no.6 s.263
• /
• pp.456-461
• /
• 2006

Background: Distal anastomosis using artificial vascular graft is difficult when luminal size mismatch occurred owing to severe occlusion of popliteal artery and its branches. So we reconstructed blood flow to ischemic lower limb by using autologous greater saphenous vein in situ graft (GSVISG) as vascular graft material. Material and Method: From July 2000 to July 2005, 26 patients treated using GSVISG. We analyzed clinical results retrospectively by chart review. Result: There was no in hospital or early postoperative death and 6 late deaths occurred during follow up period. Postoperative complications were 5 cases of early graft obstruction, 2 cases of wound dehiscence, 1 case of graft aneurysmal change, 1 case of seroma formation at inguinal wound and 1 case of graft injury during valvulotomy. Overall patency rate during follow up period was 69.3%. Conclusion: Greater saphenous vein in situ graft is acceptable vascular graft for arterial occlusive disease of lower extremity.