• Journal of the Korean Chemical Society
• /
• v.58 no.6
• /
• pp.600-611
• /
• 2014

In this study, we sampled science writing tasks and investigated their frequency of use shown in the chemistry domain from two sets of 18 middle school science textbooks developed under the 2007 Revised National Curriculum(RNC) and the 2009 RNC, respectively. In addition, we categorized the sampled science writing tasks depending on the cognitive process and type of writing and compared with the results obtained from analysis of global issues presented in the science writings. From the textbooks developed under the 2007 RNC, a total of 183 science writing tasks were identified in which 10.17 tasks per textbook and 1.32 tasks per 10 pages were used averagely. A total of 168 were identified from the textbooks for the 2009 RNC. Among them, 9.33 tasks per textbook and 1.23 tasks per 10 pages were used on average. Comparing with these results, the average frequency of use of the tasks per textbook and per ten pages were decreased, respectively. Moreover, the number of science writing tasks were found in each curriculum varied considerably depending on the units and the publishers, and that the writing tasks were mainly arranged in the finale, wrapping up stage. In the analysis of science writing tasks according to the cognitive process, the highest and lowest frequency of use were observed in the category of 'understand' and 'remember', respectively. According to the classification of science writing tasks based on the types of writing, the writings for the information delivery were most used and the highest frequency of use was observed in the category of 'understand' of the cognitive process belonging to 'information delivery'. As for the results of the analysis of global issues, the number of science writing tasks including global issues increased from 21(11.48%) in the 2007 RNC to 33(19.64%) in the 2009 RNC. Furthermore, science writing tasks associated with protection of environment showed the highest frequency of use in the both curriculums, and it was analyzed that the materials of global issues used in the 2009 RNC were much more diverse.

• Korean Journal of Plant Resources
• /
• v.31 no.5
• /
• pp.489-497
• /
• 2018

In Korea, common and Tartary buckwheat are cultivated mainly in spring and fall, however the available buckwheat varieties are still very limited. In this study, we have evaluated buckwheat germplasm for agronomic traits and compared flavonoids contents in different cultivation period and collection area. In common buckwheat, the number of days from sowing to flowering was 40 and 31 days and from sowing to maturity took 90 and 69 days in spring and fall cultivation, respectively. The number of nodes and branches were higher in spring cultivation while the hundred seed weight was higher in fall cultivation. The average flavonoids contents in common buckwheat were 0.20 mg/g dry weight (DW) and 0.40 mg/g DW in spring and fall cultivation, respectively. The highest flavonoids content was detected in Jeonnam accessions with 0.29 mg/g DW and 0.43 mg/g DW during spring and fall cultivation, respectively. The flavonoids contents were varied from 1.5 to 2.5 times according to the collection area. These results suggest that the agronomic traits and flavonoids contents were vary depending on the cultivation environment and germplasm collection area. Therefore, it is necessary to select the material by considering the characteristics of the germplasm for breeding of new varieties.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.81-86
• /
• 2012

Purpose : Combined MR/PET scanners that use the MRI for PET AC face the challenge of absent surface coils in MR images and thus cannot directly account for attenuation in the coils. To make up for the weak point of MR attenuation correction, Three Modality System (PET/CT +MR) were used in Severance hospital. The goal of this work was to investigate the effects of MR Torso Coil on CT attenuation correction for PET. Materials and Methods : PET artifacts were evaluated when the MR Torso Coil was present of CTAC data with changing various kV and mA in uniformity water phantom and 1994 NEMA cylinderical phantom. They evaluated and compared the following two scenarios: (1) The uniform cylinder phantom and the MR Torso Coil scanned and reconstructed using CT-AC; (2) 1994 NEMA cylinderical phantom and the MR Torso Coil scanned and reconstructed using CT-AC. Results : Streak artifacts were present in CT images containing the MR Torso Coil due to metal components. These artifacts persisted after the CT images were converted for PET-AC. CT scans tended to over-estimate the linear attenuation coefficient when the kV and mA is increasing of the metal components when using conventional methods for converting from CT number. Conclusion : The presence of MR coils during PET/CT scanning can cause subtle artifacts and potentially important quantification errors. Alternative CT techniques that mitigate artifacts should be used to improve AC accuracy. When possible, removing segments of an MR coil prior to the PET/CT exam is recommended. Further, MR coils could be redesigned to reduce artifacts by rearranging placement of the most attenuating materials.

• Journal of The Korean Association For Science Education
• /
• v.24 no.6
• /
• pp.1118-1130
• /
• 2004

This article aims to (a) investigate children's images of a scientist's life style by comparing children's drawings about a scientist's schedule with those about a company employee's schedule in a weekday and on Sunday; and (b) examine the usefulness of 'Drawing A Scientist's Schedule (DASS)' test as a new instrument of learners' conceptions of a scientist and his/her work. To do those, thirty sixth- grade children participated in this study. The children, 15 boys and 15 girls, were selected from a classroom of an elementary school located in Gongju city. The children's drawings were analyzed in conjunction with individual interviews. The interviews facilitated the clarification of any ambiguous attributes of the drawings by questioning after their completion. Several significant conclusions can be drawn from this work: First, the children conceived that a scientist has more mandatory time, and less necessary and leisure time than does a company employee. Interestingly, many children thought that a scientist has similar life style on Sunday to that in a weekday, unlike a company employee. Second, in case of necessary time use in a weekday and on Sunday, the difference between a scientist and a company employee results from their sleeping time. Also, the children showed more various conceptions of a scientist's sleeping time than those of a company employee's sleeping time. Third, in case of mandatory time use, the children conceived that a scientist spends more time for his/her occupational work and less time for his/her housework activities than does a company employee. Fourth, the children's drawings showed that there is difference between a scientist's and a company employee's leisure time use and activities. Finally, the DASS test indicated its possibility and usefulness as an instrument for investigating learners' images on a scientist and his/her work. The instrument exhibited several distinctive children's conceptions that is difficult in identifying by using the DAST, a popular instrument.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.6
• /
• pp.796-806
• /
• 2012

This study was conducted to investigate dietary attitude, and nutritional knowledge of middle school students in Gwangju and examine their perception and utilization of food labeling systems. The total and mean dietary attitude scores were 75 and 49.47, respectively. The total and mean nutrition knowledge scores were 15 and 10.88, respectively. Girls showed significantly higher nutrition knowledge than boys (p<0.01). Overall, 62.9% of respondents checked food labeling, and there were significant differences in dietary attitudes among groups that did and did not checking labeling (p<0.001), with higher dietary attitude being associated with checking the label. Moreover, higher nutritional knowledge was associated with checking the food label. Individuals who checked the food label considered the expiration date (54.9%), product name (14.4%) and price (10.2%). The main reasons for checking food labeling were (in descending order) to confirm the expiration date (61.6%), determine the ingredients and nutritional information, learn how to store the product, and compare the price and weight with other products. The overall satisfaction with the food labeling system was 16.20 out of 30, and significant differences (p<0.001) were observed among individuals with high, moderate and low dietary attitudes, as indicated by satisfaction scores of 17.54, 16.32 and 14.86, respectively. Individuals with high, moderate and low dietary attitudes had nutritional knowledge scores of 15.79, 16.08, and 17.08 respectively. The overall score for understanding nutrition labeling was 4.71 out of 7, and the understanding differed significantly among groups (p<0.01), with those with moderate food attitudes having the highest score.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.10
• /
• pp.1558-1566
• /
• 2015

The purpose of this study was to examine dietitians' perception of importance about standards of foodservice management associated with long-term care hospital accreditation. This study was carried out through a postal survey consisting of 500 questionnaires, and 157 returned questionnaires were used in the statistical analysis. The results were summarized as follows. Average scores of perception of importance were 4.54/5 points in foodservice production management domain, 4.56/5 points in foodservice facilities management domain, and 4.70/5 points in foodservice sanitation domain. The average scores of importance of long-term care hospitals without accreditation were significantly (P<0.05) lower than those of hospitals with accreditation in items of 'establishment of ventilation equipment in kitchen', 'establishment of hand-washstand in toilet (warm-water, soap)', 'setup of sterilizing foothold in entrance of kitchen and toilet', 'division and use of knife, chopping board, gloves, and utensils before and after cook', 'establishment of cleaning plan and cyclic practice', and 'recording of receiving diary'. Results indicate that there is a need to supplement a casebook of regulations by suggesting detailed and critical limits in the case of below average points of importance. A manual, including HACCP standards for foodservice management of long-term care hospitals, is needed, along with education and webpage for comparing notes on accreditation of long-term care hospitals.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.41-50
• /
• 2006

It is generally regarded a design system in post-industrial society, which products designed by in-house designers or design consultancy are manufactured in factory and distributed in market for the consumer. Although it is treated an old design system in traditional society, the traces of vernacular design has been remaining in the state of adopted to the periodical needs in these days, also proving the attribute of design culture to constitute human's material environment as well as existing design systems. There were discovered various design artifacts in daily surroundings vary from the established design in several manners, user modifications or manufactures in everyday lives formalized them. It was approached a case study that analyze the changes of artifact configuration and designer/user context and creation process of the non-professional design artifacts, Creativity Template Theory and ACM(Artifact Context Model) have been utilized for the analysis model. From the analysis result, It assume that the everyday artifacts may be ordinary but extra-ordinary including particular ideas and identity represented by everyday designers or users. Beside these characteristics induce the potentiality that reflect on creative motives for the designers or a complementary artifact generator filling up with drawbacks in established design system. The everyday design domain, various explorations and alternatives are made, is seems to be another design practice domain dissimilar to the one in the industry-based design. Moreover it provides an more easily accessability for the approaching user-friendly design, user customization because they conduct the reliable modeling of consumer and end-user. Finally, based on the exploratory study regarding interpretation of context and configuration in the everyday artifacts, new approach for the design process and design education through more detailed cognitive modeling of everyday designers will be a further study.

• Cartoon and Animation Studies
• /
• s.35
• /
• pp.209-226
• /
• 2014

Chinese cartoon industry lately was able to see a rapid development which changed cartoon creative personnel associated with increased production technology development, new technologies, government support policy and a variety of environments. It was likely to have high expectations for changes in the policy environment of the country supported the comic creators and authors to develop its own comic industry. The State Administration of Press, Publication, Radio, Film and Television of China promoted the production for the development of Chinese animation with "domestic little video about the development of the animation industry's opinion", and "documents Documents". Animation industrial base and animation education was established in institutions such as the organization one after another. In the meantime, the spread of Japanese comics picture on the creative activation admitted but their comic creation and activation was slump. It would produce that the creation of its traditional culture based activation strategy to built comics. Since 2004, It was well represented for the creators of the cartoon creation of the tradition and uniqueness of Chinese history. In the prior to 2004, comics and strategies was to be differentiated. Today, China is an important source of comic marked the fact that the tradition was recognized and it was further developed with combining creativity of the past and the present production system. Comic creators comic story of traditional culture were excavated in order to have a sense of awareness and modern. The difference between China Cartoon and comics in other Asian countries is true that cartoon story came out naturally in a traditional culture. In this study, It would lead in the future to allow directional presented for the digital cartoon making development policy awareness through the comic creation and production of new media content industry enabled to China. Now, in the new media industry for the development of China's neighboring countries coped with climate change for the active exchange of information. It poured out ceaseless technical development and a range of policies to support business expansion. New China Cartoon was leaped to re-fit the industry.

• Cartoon and Animation Studies
• /
• s.48
• /
• pp.311-332
• /
• 2017

Currently, the world is making efforts to develop cultural industries around more refined parts of the world. The development of cultural industries has far-reaching implications for promoting national brands and national image promotion as well as economic benefits. In particular, China hopes to advance into its own animation market because it has an extensive animation market. In 2005 The Chinese government, however, banned foreign animation market from entering the Chinese animation market. However, at that time, Chinese animation firms also saw considerable economic losses because they had to undergo almost everything from animation to distribution to rationing. In fact, the policy was designed to protect Chinese animations, but instead of preventing Chinese animations from developing original contents, it caused various problems such as China's animations, or the development of Chinese animation industries. In this thesis, we will explore the policy related to animation industry in China, research and development of animation industry, and establish the direction of development of Chinese animation industry through suggestion of improvement in Chinese animation industry. For starters, we have diversified the contents of the Chinese animation industry by adapting the contents of the Chinese animation to the global market through the globalization of contents, stories and materials. Currently, animation is developing beyond 3D,4D and VR but there is no shortage of animation experts in China, so it is necessary to nurture specialized professionals by opening a related department in China. Also, the government will establish a National Animation Industry complex to work in various animation companies. We expect to develop cultural contents through mutual cooperation between animation companies in China and the sharing of information sharing and collaborative research.

• Korean Journal of Environmental Biology
• /
• v.30 no.2
• /
• pp.90-97
• /
• 2012

Environmental characteristics and vegetation of the natural habitats of Eranthis byunsanensis B.Y. Sun were investigated in order to provide the basic data for conservation, restoration, and utilization of this Korean endemic plant. This study was conducted in Anyang, Byeonsan, Geoje, Gyeongju, Jeju, Ulsan and Yeosu. E. byunsanensis was distributed around the altitudes of 84~585 m with a slope degree of $10{\sim}20^{\circ}$, and mostly formed discontinuous populations in north-east part of valleys. Soil analysis showed the mean organic matter of 9.6% and a slightly acidic pH (mean pH of 4.9). The mean gravimetric water content was 16.5%. Correlation coefficients between environmental factors and community characteristics suggested that there was a positive correlation between slope degree and soil water content, between slope degree and soil pH, between soil organic matter and importance value, and between species richness or evenness and species diversity. The vascular plants from 59 quadrats of 7 habitats were identified into 144 taxa. A few species were dominants and similarly distributed in Byeonsan, Jeju, Ulsan and Yeosu. The highest species diversity was found in Geoje (1.43), while Anyang showed the lowest (0.87). Species evenness of Gyeongju and Jeju was bigger than 0.8, but that of Geoje was the lowest (0.59). Dominant species of woody plants in and around the 59 plots were represented by high frequency of Acer pictum subsp. mono, Carpinus cordata, Lindera obtusiloba, and Carpinus laxiflora. The results of this study can provide useful data for conservation and restoration of natural habitats of Korean endemic Eranthis byunsanensis and for the development and growth of this species for ornamental purposes.