• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.487-490
• /
• 2005

재생 가능한 자원인 동식물성 기름으로부터 만들어지는 수송용 연료 바이오디젤은 낮은 대기오염물질 배출과 $CO_2$ Neutral 특성으로 환경친화적인 연료로 인정올 받으며 전세계적으로 그 생산량이 급격히 증가하고 있다 한국에서는 년간 20만톤의 폐식용유가 배출되며 이중 약 10만톤이 회수 가능한 것으로 추산된다. 폐식용유의 무단 폐기로 인한 수질오염과 폐기물의 자원 재활용 및 에너지 생산 관점에서 폐식용유를 바이오디젤 원료로 사용하는 연구가 많이 진행되었다. 높은 함량의 유리지방산을 함유한 폐식용유를 효율적으로 전이에스테르화(methanolysis) 하기 위해서는 먼저 산 촉매를 이용한 유리지방산의 전환 제거가 필요하다 본 연구에서는 다양한 종류의 강산성 이온교환 수지를 폐식용유의 전처리(pre-esterification)용 고체 산 촉매로 회분식 반응기에서 테스트하였으며 그 결과 Amberlyst-15가 유리지방산의 에스테르화 반응에 가장 적합한 것으로 나타났다. 회분식 반응기에서 도출된 최적 전처리 반응조건을 적용한 200시간 이상의 연속 전처리 운전결과 폐식용유에 함유된 $5\%$의 유리지방산이 $90\%$이상 전환제거 되었다 전처리 반응 후의 폐식용유를 균질계 염기촉매(KOH) 존재하에 메탄올과 전이에스테르화 반응을 시킨 결과 바이오디젤로 불리는 지방산메틸에스테르(Fatty Acid Methyl Ester, FAME)의 생산 수율은 $85\%$로 얻어졌으며 국내 바이오디젤 표준 규격에 따른 연료특성 분석 결과 FAME의 농도 규격을 제외한 모든 항목이 국내 규격을 만족하였다 폐식용유 바이오디젤의 FAME 농도가 $94.3\%$로 국내 규격$96.5\%$에 미달하는 문제는 식물성 원료유로 제조한 고순도 바이오디젤과 혼합 사용하거나 감압 증류 공정을 통해 고농도의 폐식용유 바이오디젤을 제조하여 해결 가능하다. 대전시 신성동 소재의 음식점에서 수거한 폐식용유를 원료로 하여 생산한 바이오디젤의 차량 배출가스 실증 테스트 결과 경유 차량의 주 오염물질인 PM과 Soot 및 기타 오염물질의 배출량은 감소하였으나 NOx의 배출량은 약간 증가하는 것으로 나타났다

• Resources Recycling
• /
• v.20 no.1
• /
• pp.14-27
• /
• 2011

In order to review the End-of Life Vehicle(ELV) recycling system and recycling business of dismantlers in Japan, scheme of the automobile recycling law, status of ELV recycling, exports of used cars, ELV marketing business of dismantler and upgrading of used parts net work were studied. On the other hand, field survey in details for dismantling works were conducted at West-Japan Auto Recycling Co.. Although the ELV recycling system has been operating smoothly without any noticeable trouble, recycling business is running under severe circumstance. Exports of used cars have been increasing day by day through worldwide 176 countries. Finally, reuse parts of ELV concerning innovation marketing was discussed.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.351-355
• /
• 2007

Resveratrol, a polyphenolic compound with antioxidative property, was purified from the grape's twig to be used as functional additives of food and/or cosmetics. Extraction of the grape's twig was performed using 80% ethanol in ultrasonic extractor for 60 min. The crude extract was purified up to 99% after elution through silica gel open column chromatography. The stability of the purified resveratrol was as follows: a half life of 90 days at 40$^{\circ}C$ and 60 days at 25$^{\circ}C$. A sensory test of the commercial grape juice including the 1-10 ppm of purified resveratrol showed better preference than the grape juice without purified resveratrol additive. Color and smell test showed no difference between the samples. The grape twig can be used as a valuable resource for the extraction of resveratrol, which would be added to nutraceutical and cosmetic products.

• Industry Promotion Research
• /
• v.5 no.1
• /
• pp.13-20
• /
• 2020

This study is about consumer preference of plastic toilets that can provide automatic supply of recycled water. First, the preference for plastic toilet seat design by gender and age group was preferred for gender type C and G for the sex. As the result of the chi-square test, the significance probability is .044 and the significance is P <.0 5. I could confirm that. Age, teens, 40 s, and 50 s or older prefer type C, 20 s and 30 s, but B type is not statistically significant. Second, the differences among the groups of preference for appearance design criteria according to general characteristics were all stable (stable appearance) in gender, age, region, education, and salary, but the chi-square test showed that they were not statistically significant. There was no difference between them. This study has implications for improving competitiveness and productivity by reducing the main production cost by commercializing toilets made of plastic materials.

• Resources Recycling
• /
• v.14 no.4 s.66
• /
• pp.3-9
• /
• 2005

In this study, the utilization possibility of coal-preparation refuse emitted from Hwasun coal mine in Korea as a raw material for ceramic body was investigated. The firing shrinkage ratio of ceramic specimen made from the coal-preparation refuse was reduced with increasing the addition amounts of that, while the compressive strength was slightly decreased. The weight of ceramic body was also reduced because carbon contained in the coal-preparation refuse was burn by fring. The water adsorption ratio of the ceramic specimen was under 10 wt%, and the compressive strength of that was over 21 MPa at over $1,150^{\circ}C$ for 2 hr. Therefore, it was possible to make the 1st garde clay brick of KS L 4201 from the coal-preparation refuse.

• Journal of Korea Foundry Society
• /
• v.30 no.4
• /
• pp.147-150
• /
• 2010

An eco-friendly production technique of Al-8.6Ti-0.025C refiner was developed by melting a Al-Ti master alloy in a graphite crucible, in which the potential nucleation site, TiC effectively formed by the spontaneous in-situ reaction between excessive Ti and carbon from graphite crucible. The A3003 alloy refined by the Al-8.6Ti-0.025C showed effectively refined macrostructure and enhanced mechanical properties comparable to the commercial Al-Ti-B refiner. The effective refinement was achieved in a shorter compare to the melt-treating time commercial Al-Ti-B refiner.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.3
• /
• pp.101-108
• /
• 2016

Each year, more than seven hundred thousand tons of copper slag are generated in Korea as a byproduct during the production of copper. Due to the large amount of copper slag produced, there has been increased interest in the use of copper slag as a construction material. To evaluate the potential of copper slag as a construction material, laboratory evaluations were conducted in this study, and three particle shapes and replacement rates of river sand were selected as experimental variables. Strength, air-void characteristics, and sulfuric acid resistance were the three properties evaluated to assess whether copper slag can be used as a construction material. Test results indicate that the gradation of copper slag has an effect on strength, and the maximum strength was achieved when 60 % of river sand was replaced with copper slag. In addition, when compared with ordinary Portland cement mortar, replacing river sand with copper slag reduced air void size and increased sulfuric acid resistance.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.371-378
• /
• 2016

In this study, a small portable sorting pilot for separation that can be used in dismantling construction site, which is the stage of construction waste generation, was developed, and its separation efficiency was evaluated to increase the actual recycling rate of the construction waste. The pilot was developed as portable sorting pilot for separation of 6 ton capacity that can handle one arm roll box within a $15m^2$ area in consideration of narrow places in the downtown area where a number of dismantling sites are located and various processes performed in the dismantling sites. In order to evaluate the efficiency performance of the developed device, the separation and sorting were carried out ten times with respect to trommel rotational speed RPM 2-3, 4-6 and 7-8. According to the results, the highest efficiency of about 90% was shown at RPM 6-7.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.5
• /
• pp.199-204
• /
• 2015

In this study, prevention methods of radial cracks generated inside of artificial lightweight aggregate made of reject ash and dredged soil were investigated. The reject ash and dredged soil had mixed with weight ratio of 7 : 3 and formed to spheric shape of 5~20 mm diameter, then, the aggregates were manufactured using flash sintering method at $1200^{\circ}C$ for 10 min. The formation of radial cracks in the aggregates were suppressed as the size of specimen decreased. Also, the addition of silica to aggregates had prevented generation of the radial cracks. As the size and the amount of silica powder added increased, the development of radial cracks was constrained. Therefore the artificial lightweight aggregate manufactured in this study expected to be applicable to many fields such as construction and environmental usages. Also it is expected to contribute greatly to increase the recycling rate of reject ash and dredged soil.

• Resources Recycling
• /
• v.17 no.1
• /
• pp.66-72
• /
• 2008

Fundamental studies for the synthesis of Mn-Zn ferrite powder were investigated using a series of leaching and coprecipitation processes from spent alkaline manganese batteries. Zinc and Manganese dissolution rates obtained at the reaction conditions of 100g/L pulp density, 3.0M $H_2SO_4$, $60^{\circ}C$ and 200 rpm with 30 ml $H_2O_2$ as a reducing agent were more than 97.9% and 93.9% and coprecipitation of Mn-Zn ferrite powder was performed according to various reaction conditions such as temperature, time and amount of $O_2$ gas injection using the leaching solution. As a result of coprecipitation, Mn-Zn ferrite could be synthesized directly at low temperature in the reaction condition pH 12, $80^{\circ}C$, $O_2$ 1.3 L/min. and 400 rpm. The synthesized Mn-Zn ferrite powder was spherical powder of $0.143{\mu}m$ particle size and had a saturation magnetization about 80 emu/g.