• Journal of KSNVE
• /
• v.8 no.3
• /
• pp.450-456
• /
• 1998

A rotordynamic analysis is performed with a centrifuge rotor-bearing system for the raing speed of 100,000 rpm. The system is composed of a centrifuge rotor(or simply the rotor), flexible shaft, motor rotor and shaft, and two support rolling element bearings of the motor shaft. Design goals are to achieve wide separation margins of critical speeds and favorable unbalance responses of the rotor at the associated critical speeds. The latter requirements are especially important as the system crosses multiple numbers of critical speeds and as the system may not have enough separaton margins around the rating speed. As the system adopts an extra-flexible shaft, it is shown that the rotor has satisfactory small unbalance responses over higher criticals while having an unsatisfactory large one at the first critical. To supress this a bumper ring or guide bearing needs to be installed at a suitable location of the flexible shaft. It is also shown that even with the flexible shaft the dynamics of the motor must be incoporated into the full system model to accurately identify the fourth critical speed, which is close to the rating speed, and higher ones. The analysis is based on the finite element method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.374-375
• /
• 2010

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.666-667
• /
• 2008

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.57-61
• /
• 1993

본 연구목적은 선형부분구조물과 그 부분구조물들을 결합하는 비선형연결부 로 이루어진 구조물을 해석하기 위해 비선형 연결부의 모델변화를 효과적으 로 규명하는데 있다. 제안된 방법은 시간영역에서만 계산이 가능하였던 힘- 상태 사상법을 주파수영역으로 확장함으로써, 전체구조물에서 선형부분구조 물들은 분리 해석이 가능하고, 시간영역의 많은 데이터를 줄일 수 있는 장점 이 있다. 제안된 방법의 타당성 및 장점을 검증하기 위해서 쿨롱마찰 비선형 특성을 갖는 두 가지의 구조물에 대하여 각각 실험적으로 연결부의 매개변 수를 규명하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.1003-1008
• /
• 2001

In beamforming method, source positions are predicted by MUSIC (Multiple Signal Classification) power method and composite sound fields can then be decomposed into each partial field by beamforming, detenninistically without restriction of the distance between reference microphones and sources. However, reference microphone array shape is important in both MUSIC and beamforming method. Thus the present paper describes the effect of the reference microphone array shape.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.217-220
• /
• 1995

본 논문에서는 최적화기법을 이용하여 모드매개변수를 추정하는 방법을 개발하였다. 최적화기법중 steepest descent method와 Fletcher-Powell method를 1자유도계의 시뮬레이션 데이터에 사용하여 Fletcher-Powell method가 초기값이나 계의 감쇠비에 관계없이 항상 정확한 모드매개변수를 추정함을 밝혀 내었다. 2자유도계의 시뮬레이션 데이터에 적용하였을 때도 본 방법은 정확한 모드매개변수를 추정하였다. 본 방법은 기존의 모드해석방법처럼 실제모드수보다 많은 모드수를 가정할 필요가 없고, 밀집한 모드를 분리하는 능력도 우수하였다. 본 방법을 실험 데이터에 적용하였을 때에도 만족할만한 결과를 나타내었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.730-734
• /
• 2003

A beamforming method is a kind of spatial filter that focus the amy's signal capturing abilities in a desired direction. In this paper, we detect the location of a source under reflective condition using the multi-dimensional MUSIC algorithm then, we can iud the image source locations from the experimental geometry, and we reconstruct the partial fields for direct wave and reflected wave by using Adaptive nulling algorithm. Numerical simulations are performed to verify its performance under various conditions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.10a
• /
• pp.21-27
• /
• 1993

매개변수가진에 종속되는 현의 횡방향진동을 시간영역에서 필터작업, 힐버트 변환과 순간주파수 개념을 도입하여 해석함으로서 종방향의 순간진동변위를 추정하는 방법이 제시되었다. 그리고, 실험을 통하여 이론의 타당성을 검증 하였다. 또한, 모의 실험의 결과 일반적인 현구동계에 있어서는 넓은 적용변 수의 선\ulcorner영역에서 종변위가 횡변위와 분리(decoupling) 되어서 공간적으로 길이에 따르는 선형적인 증가성과 시간적으로 조화적인 주기성을 가진다는 것을 확인함으로서 임의의 위치에서의 종변위를 파악함이 가능하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.232-235
• /
• 2004

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.5
• /
• pp.503-509
• /
• 2002

Cylindrical chamber silencers with an extended inlet and outlet are extensively used in many application fields to reduce the propagated noise in ducts. The basic attenuation effectiveness in the low frequency region can be explained by the reactive wave action inside the expansion chamber associated with the geometric configurations of the inlet and outlet locations, and the area expansion of the jacket. In this study. an acoustic analysis is carried out for a concentric extended pipe inserted into a simple expansion chamber. An algebraic equation is derived by using the eigenfunction expansion and orthogonality principle in which the acoustic pressures and particle velocities defined on each subdivided surface are expressed by the separable coordinates. By using the proposed analytical method, transmission losses are predicted for several configurations of the concentric extended systems and they agree very well with experimental results.