• Journal of Mushroom
• /
• v.3 no.2
• /
• pp.60-64
• /
• 2005

'Dajoa', a new variety of oyster mushroom was developed by Mushroom Research Institute, Gyonggi Province Agricultural Research and Extension Services in 2004. It was bred with mating between monokaryotic strains isolated from Boonli 89-1 and ASI 2018-249. The major characteristics of the mushroom are showing a lot of pinheadings, the gray-colored and infundibuliform pileus. The optimum temperature for the mycelial growth was around $26{\sim}28^{\circ}C$ and that for the pinheading and growth of fruitbody was around $15{\sim}18^{\circ}C$. Incubation period was required around 24 days with bottle culture and about 21days in Poly Prophylene(P.P) plastic bag culture. The yields were shown high by 140.7g/850cc bottle and 260.3g/1kg P.P. plastic bag.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.229-233
• /
• 2015

In this study, we examined the removal characteristics of suspended particulate matters which are one of carcinogens to cause lung cancer. The fine dust capture by a pilot scale filtration system depends on several important variables such as humidity, initial fine dust injection volume, and flow rate. The average concentration of particulate matters in the test chamber decreased, but the ultimate collection efficiency did not change during the filtration under high humidity, compared to those of using ambient conditions The initial injection amount of fine dust did not influence the particle capturing efficiency. When the flow rate reduced from 0.6 m/s to 0.3 m/s, the dust collection time increased approximately 1.4 times. Among all variables tested, the flow rate showed the most significant effect on the removal efficiency of fine particulate matter.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.749-762
• /
• 2019

In recent years, in urban areas, underground of roads are being promoted in order to resolve traffic congestion and to secure green spaces, and due to the low ratio of large vehicles, they are planned or constructed as road tunnels for small cars only. In addition, the tunnels being built in the city is a tendency to be enlarged to play the role of main roads. Accordingly, the capacity of the ventilation system is increasing and various ventilation methods are required, and the importance of maintenance after the completion of the tunnel such as the operating cost of the ventilation system is emphasized. Therefore, the need for optimization of the operation stage for reducing the power consumption of the ventilation system and the study of the ventilation system operation control logic is increasing. In this study, the study on the necessity of the optimization of operation stage and control logic of the ventilation system was carried out to realize the energy-saving operation for the small car only passing through tunnels which is applied of ① jet fan and combination ventilation system (② jet fan + air purifying equipment, ③ jet fan + vertical shaft, ④ jet fan + supply air semi-transverse). As a result of this study, there can be various operating combinations in the case of the combined ventilation system, and even though the amount of ventilation air is the same, the operating power varies greatly according to the operating combinations. It was found that operating the axial fan first rather than the jet fan first operation method has an effect on power saving.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.14 no.1
• /
• pp.195-209
• /
• 2012

1) 버섯종균 생산 시스템 개선 버섯의 품질과 수량을 좌우하는 주요 요인은 종균의 활력이다. 그러나 말라위에서는 종균의 활력이 낮아 조그마한 350cc 음료수 병에 배양 완성하는데 20일이 소요되는 등 노동력의 비효율성을 개선하였다. 따라서 350cc 병을 3500cc 비닐봉지로 개선하여 입봉하는데 소요되는 시간을 10배 이상으로 단축 개선하였다. 또한 곡립종균을 액체종균으로 대처한 결과 균사생장 속도가 빨랐으며 작업속도가 빨라졌다. 곡립 수수를 밀로 대체하여 종균제조 노동력을 효율적으로 전환하였다. 2) 버섯재배사 환경관리 개선 버섯재배의 4대 환경조건은 온도, 습도, 환기, 광이다. 그러나 말라위의 버섯재배사는 4대 환경조건 조절을 자연상태에 의존하고 있다. 그럼에도 불구하고 비닐로 커버된 상태에서 문을 닫아두어 과습이 되고 환기가 되지않았다. 이를 개선하기 위하여 직경 5cm 환기공을 버섯재배사 당 4개씩 만들도록 지도하였다. 3) 버섯배지 개선 말라위에서는 옥수수 대를 잘라 버섯배지로 주로 이용하고 있다. 이를 개선하여 말라위 북부지역(다광)에 대규모 사탕수수 공장을 방문하여 사탕수수 박을 이용하여 버섯재배 기술을 교육하였다. 이를 이용함으로서 버섯 균사생장속도를 빠르게 하고 균사량의 축적을 높이도록 하여 고품질 다수확하는데 교육을 하고 컨설팅을 실시하여 개선하였다. 4) 버섯 배지 야외발효 후 지면재배 시도로 시간 단축과 비용절감 말라위 버섯배지 혼합제조법은 옥수수대 한가지로서 영양원이 없다. 이를 개선하여 배지를 수분을 흡수시킨 후 야외 퇴적하므로서 배지의 물리성을 개선하고 야외발효 과정 중 양분이 합성되어 양질의 배지를 만드는 방법이다. 야외발효한 배지를 봉지에 담아 균상에 입상하는 불편함과 나무로 만들어진 균상대의 과습으로 인한 곰팡이 발생과 개미 침입으로 썩는 것 등을 방지하기 위하여 지면재배 방법으로 개선하였다. 이 지면재배는 균상 만드는 나무재료와 인건비 절감. 병해충 발생 방제 뿐만아니라 고품질 다수확할 수 있는 방법으로 개선 교육과 시범 시연을 실시하였다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.10b
• /
• pp.98-103
• /
• 1996

석탄가스화복합발전소내 공기분리장치와 연계된 가스터빈 공기압축기의 성능병화를 예측할 수 있는 해석방법을 제안하였다. 공기분리장치와 연계된 가스터빈용 공기압축기의 성능변화는 유선곡률방법과 압력손실모델을 결합한 해석방법을 사용하였으며, 예측결과들을 실제 압축기성능 시험 결과와 비교하여 예측정확도를 검증하였다. 제안된 압축기성능 해석방법을 근간으로, 압축기와 공기분리장치의 연계조건인 열교환기의 핀치포인트 온도차, 추출공기량 및 추출 공기압력이 압축기 성능변화에 미치는 영향을 정량적으로 예측하였다. 공기추출량이 늘어나거나 핀치포인트 온도차가 커질수록, 압축기의 압축비 및 소요동력은 증가하나, 압축기 효율은 공기추출량의 증가에 따라 고압공기추출시에는 저하되고, 저압공기추출시에는 향상되었다. 더 나아가, 압축기의 일반화된 성능특성곡선의 제시를 통해, 압축기 효율을 극대화 할 수 있는 압축기/공기분리장치 간 연계조건의 최적화를 시도하였다.

• Journal of Life Science
• /
• v.20 no.3
• /
• pp.437-443
• /
• 2010

This study was designed to examine the aerobic capacity and ventilatory response during an incremental exercise in elite high school cyclists. Twelve boys ($17{\pm}1\;yr$, $175{\pm}5\;cm$, $70{\pm}9\;kg$) participated in anthropometric measurements, incremental exercise testing, and pulmonary function tests. During incremental exercise testing using a cycle ergometer, their maximal oxygen uptake ($VO_2max$), maximal power output, ventilation, ventilatory equivalents for oxygen ($V_E/VO_2$) and carbon dioxide ($V_E/VCO_2$), respiratory rate, and tidal volume were measured. Time variables such as inspiratory time (Ti), expiratory time (Te), breathing time (Tb), and inspiratory duty cycle (Ti/Tb), as well as inspiratory flow rate ($V_T$/Ti) were assessed. Pulmonary function of vital capacity (FVC), forced expiratory volume in one second ($FEV_1$), $FEV_1$/FVC, and peak expiratory flow were evaluated. Their $VO_2max$, maximal heart rate, and Wmax were $57.5{\pm}3.9\;ml{\cdot}kg^{-1}{\cdot}min^{-1}$, $194.1{\pm}8.6\;beat{\cdot}min^{-1}$, and 452 W, respectively. $VO_2max$ was not related to any anthropometric parameters. Most ventilatory variables progressively increased with exercise intensity. As intensity increased, Ti, Tb, Tb decreased while Ti/Tb was maintained. Below an intensity of 250 W, height, weight, body mass index, and body surface were highly correlated with $V_T$/Ti and Ti/Tb (p<0.05). Collectively, $VO_2max$ appeared to be lower than adult cyclists, suggesting a different pattern of ventilatory control as age advances. Morphological characteristics were not related to $VO_2max$ in the population. Time variables of ventilatory response seemed to be related only at an exercise intensity level of less than 250 W. $V_T$/Ti may be related to exercise endurance capacity, but Ti/Tb was similar to adult cyclists.

• Journal of Mushroom
• /
• v.4 no.3
• /
• pp.116-121
• /
• 2006

'Seoln', a new variety of oyster mushroom was developed by Mushroom Research Institute, Gyonggi Province Agricultural Research and Extension Services in 2005. It was bred with mating between monokaryotic strains isolated from KME35124 and $F{\cdot}X3$. The major characteristics of the mushroom was shown a lot of primordia, the gray-colored and bunch pileus. The optimum temperature for the mycelial growth was around $26{\sim}30^{\circ}C$ and that for the primordia and growth of fruit-body was around $10{\sim}15^{\circ}C$. Incubation period was required around 25 days with bottle culture and about 23 days in Poly Prophylene(P.P) plastic bag culture. The yield was shown high by 138.8g/bottle and 250.9%/P.P bag.

• Fire Science and Engineering
• /
• v.30 no.2
• /
• pp.68-74
• /
• 2016

In semi-transverse ventilation system applied for road tunnel, adjustment of the port opening ratio is an essential part for uniform airflow rate per unit length over the entire tunnel. However, it has not been considered decently throughout the design process and operating of the tunnel. Therefore, in this study, we developed a program for the calculation of the opening size ratio of supply or exhaust port in transverse ventilation system and carried out the research to present a management plan for the port. In supply duct system, the opening size of the port had a tendency to increase and then decrease later when it gradually becomes closer toward the bulkhead at the beginning of the duct the minimum opening degree is to appeared as 56%. In the exhaust system, port size is the smallest at the beginning of duct as 15%, has shown a tendency to increase towards the bulk head. As results of estimating the air flow rate for 300 m intervals, the exhaust flow rate in the center of tunnel appeared to be extremely low as 8.1% and 12.5% when port size is constant and is adjusted supply type. Thus, even if the normal ventilation efficiency is declines, yet it is highly recommend adjusting the port size in order to obtain a uniform flow rate at fire accidents.

• Journal of Navigation and Port Research
• /
• v.48 no.4
• /
• pp.274-283
• /
• 2024

Climate change is currently one of the most pressing environmental issues, primarily caused by carbon emissions from fossil fuel usage. As a result, alternative fuels that effectively reduce carbon emissions are garnering more attention. Among these alternatives, hydrogen has numerous advantages, such as its ability for large-scale storage and transport. However, it is crucial to prioritize safety measures, particularly in facilities that handle hydrogen, due to its highly flammable and fast-spreading nature. This study aims to compare and analyze the placement of supply and exhaust vents to efficiently release hydrogen in the event of a leak in an enclosed space. The experiments involved six different scenarios, each with various combinations of supply and exhaust vents. To ensure the experimental process's safety, helium, which shares similar physical properties with hydrogen, was used to analyze the internal oxygen concentration during ventilation system operations. The results revealed that among the six scenarios, Case 2, which employed a lower side supply vent and an upper side exhaust vent, exhibited the shortest ventilation time of 4 minutes and 30 seconds. Additionally, the decrease rate in oxygen concentration was examined in the upper, middle, and lower areas. Ventilation utilizing an upper surface supply vent and two exhaust vents on the upper surface and upper side (Case 6), showed lower oxygen concentration values in the upper area, while Case 2 yielded lower values in the middle and lower areas. Therefore, it is crucial to select an appropriate supply and exhaust vent configuration considering the space's characteristics and usage environment.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1999.04a
• /
• pp.87-91
• /
• 1999

봄철 하우스 수박 무가온 조숙재배에 알맞는 보온방법을 개발하고자 아취형 단동하우스에 PE필름터널, 유공필름＋축열물주머니, 유공필름터널＋부직포터널구를 처리하고, 삼복꿀수박을 '98년 3월 23일 정식하여 4월 27일까지 36일간 터널피복재의 보온성을 검토한 결과는 다음과 같다. (1) 보온재 피복 재배 기간중 터널내 최저온도는 PE터널구 10.9$^{\circ}C$에 비하여 유공필름터널에 축열물주머니구와 부직포터널구는 각각 0.9, 2.1$^{\circ}C$ 높았다. (2) 3월하순 활착기의 하우스내 일사량은 실외 175.2w/$m^2$ 비하여 124.2w/$m^2$로 51w/$m^2$ 낮았다. (3) 터널피복재 환기작업에 따른 소요 노동력은 PE터널구 25.2시간/10a/36일에 비하여 유공필름터널＋부직포터널구는 32.4시간으로 7.2시간/10a/36일 증가하였으나, 유공필름터널＋축열물주머니는 개폐작업으로 인한 투하 노동력이 없었다. (4) 터널재배 기간중 유공필름터널＋부직포터널구가 초기생육이 촉진되었으며, 생육후기에 발생한 흰가루병 이병엽율은 2.8%로 현저히 감소하였다. (5) 수박의 수확기는 PE필름터널구 6월 22일에 비하여 유공필름터널＋축열물주머니와 부직포터널구는 6월 12, 15일로 7, 10일 앞당겼으며, 수량은 PE터널구 2,385kg/10a에 비하여 20, 32% 각각 증수하였다.