• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.2
• /
• pp.68-78
• /
• 2007

D-class is defined as a set of equivalent $n{\times}n$ boolean matrices according to a given equivalence relation. The D-class computation requires the multiplication of three boolean matrices for each of all possible triples of $n{\times}n$ boolean matrices. However, almost all the researches on boolean matrices focused on the efficient multiplication of only two boolean matrices and a few researches have recently been shown to deal with the multiplication of all boolean matrices. The paper suggests a mathematical theory that enables the efficient multiplication for all possible boolean matrix triples and the efficient computation of all D-classes, and discusses algorithms designed with the theory and their execution results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.254-256
• /
• 2019

소수체 GF(p)와 이진체 $GF(2^m)$ 상의 다중 타원곡선을 지원하는 듀얼 필드 ECC (DF-ECC) 프로세서를 설계하였다. DF-ECC 프로세서의 저면적 설와 다양한 타원곡선의 지원이 가능하도록 워드 기반 몽고메리 곱셈 알고리듬을 적용한 유한체 곱셈기를 저면적으로 설계하였으며, 페르마의 소정리(Fermat's little theorem)를 유한체 곱셈기에 적용하여 유한체 나눗셈을 구현하였다. 설계된 DF-ECC 프로세서는 스칼라 곱셈과 점 연산, 그리고 모듈러 연산 기능을 가져 다양한 공개키 암호 프로토콜에 응용이 가능하며, 유한체 및 모듈러 연산에 적용되는 파라미터를 내부 연산으로 생성하여 다양한 표준의 타원곡선을 지원하도록 하였다. 설계된 DF-ECC는 FPGA 구현을 하드웨어 동작을 검증하였으며, 0.18-um CMOS 셀 라이브러리로 합성한 결과 22,262 GEs (gate equivalences)와 11 kbit RAM으로 구현되었으며, 최대 100 MHz의 동작 주파수를 갖는다. 설계된 DF-ECC 프로세서의 연산성능은 B-163 Koblitz 타원곡선의 경우 스칼라 곱셈 연산에 885,044 클록 사이클이 소요되며, B-571 슈도랜덤 타원곡선의 스칼라 곱셈에는 25,040,625 사이클이 소요된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.247-250
• /
• 2004

Goldschmidt 알고리즘에 의한 부동소수점 1.f2의 역수는 q=NK1K2....Kn (Ki=1+Aj, j=2i)이다. 본 논문에서는 N과 A 값을 1.f2의 값에 따라서 선정하고 Aj의 값이 유효자리수의 반이하 값을 가지면 연산을 종료하는 개선된 Goldschmidt 부동소수점 역수 알고리즘을 제안한다. 1.f2가 1.01012보다 작으면 N=2-1.f2, A=1.f2-1로 하며, 1.01012보다 크거나 같으면 N=2-0.lf2, A=1-0.lf2로 한다. 한편 Goldschmidt 알고리즘은 곱셈을 반복해서 수행하므로 계산 오류가 누적이 된다. 이러한 누적 오류를 감안하면 배정도실수 역수에서는 2-57, 단정도실수 역수에서는 2-28의 유효자리수까지 연산해야 한다. 따라서 Aj가 배정도실수 역수에서는 2-29, 단정도실수 역수에서는 2-14 보다 작아지면 연산을 종료한다. 본 논문에서 제안한 개선한 Goldschmidt 역수 알고리즘은 N=2-0.1f2, A=1-0.lf2로 계산하는 종래 알고리즘과 비교하여 곱셈 연산 회수가 배정도실수 역수는 22%, 단정도실수 역수는 29% 감소하였다. 본 논문의 연구 결과는 테이블을 사용하는 Goldschmidt 역수 알고리즘에 적용해서 연산 시간을 줄일 수 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.188-198
• /
• 2005

The Goldschmidt iterative algorithm for finding a floating point square root calculated it by performing a fixed number of multiplications. In this paper, a variable latency Goldschmidt's square root algorithm is proposed, that performs multiplications a variable number of times until the error becomes smaller than a given value. To find the square root of a floating point number F, the algorithm repeats the following operations: $R_i=\frac{3-e_r-X_i}{2},\;X_{i+1}=X_i{\times}R^2_i,\;Y_{i+1}=Y_i{\times}R_i,\;i{\in}\{{0,1,2,{\ldots},n-1} }}'$with the initial value is $'\;X_0=Y_0=T^2{\times}F,\;T=\frac{1}{\sqrt {F}}+e_t\;'$. The bits to the right of p fractional bits in intermediate multiplication results are truncated, and this truncation error is less than $'e_r=2^{-p}'$. The value of p is 28 for the single precision floating point, and 58 for the doubel precision floating point. Let $'X_i=1{\pm}e_i'$, there is $'\;X_{i+1}=1-e_{i+1},\;where\;'\;e_{i+1}<\frac{3e^2_i}{4}{\mp}\frac{e^3_i}{4}+4e_{r}'$. If '|X_i-1|<2^{\frac{-p+2}{2}}\;'$ is true, $'\;e_{i+1}<8e_r\;'$ is less than the smallest number which is representable by floating point number. So, $\sqrt{F}$ is approximate to $'\;\frac{Y_{i+1}}{T}\;'$. Since the number of multiplications performed by the proposed algorithm is dependent on the input values, the average number of multiplications per an operation is derived from many reciprocal square root tables ($T=\frac{1}{\sqrt{F}}+e_i$) with varying sizes. The superiority of this algorithm is proved by comparing this average number with the fixed number of multiplications of the conventional algorithm. Since the proposed algorithm only performs the multiplications until the error gets smaller than a given value, it can be used to improve the performance of a square root unit. Also, it can be used to construct optimized approximate reciprocal square root tables. The results of this paper can be applied to many areas that utilize floating point numbers, such as digital signal processing, computer graphics, multimedia, scientific computing, etc.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.11
• /
• pp.2861-2873
• /
• 1997

An FPU(Floating Point unit) is the principle component in high performance computer and is placed on a chip together with main processing unit recently. As a Processing speed of the FPU is accelerated, the rounding stage, which occupies one of the floating point Processing steps for floating point operations, has a considerable effect on overall floating point operations. In this paper, by studying and analyzing the processing flows of the conventional floating point adder/subtractor, multipler and divider, which are main component of the FPU, efficient rounding mechanisms are presented. Proposed mechanisms do not require any additional execution time and any high speed adder for rounding operation. Thus, performance improvement and cost-effective design can be achieved by this approach.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.6
• /
• pp.31-37
• /
• 2013

Modern graphic processors, multimedia processors and audio processors mostly use floating-point number. High-level language such as C and Java use both single precision and double precision floating-point number. In this paper, an algorithm which computes the reciprocal of double precision floating-point number using a 32 bit multiplier is proposed. It divides the mantissa of double precision floating-point number to upper part and lower part, and calculates the reciprocal of the upper part with Newton-Raphson algorithm. And it computes the reciprocal of double precision floating-point number with calculated upper part reciprocal as the initial value. Since the number of multiplications performed by the proposed algorithm is dependent on the mantissa of floating-point number, the average number of multiplications per an operation is derived from some reciprocal tables with varying sizes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3093-3099
• /
• 2014

Modern graphic processors, multimedia processors and audio processors mostly use floating-point number. Meanwhile, high-level language such as C and Java uses both single-precision and double precision floating-point number. In this paper, an algorithm which computes the reciprocal of double precision floating-point number using a 32 bit multiplier is proposed. It divides the mantissa of double precision floating-point number to upper part and lower part, and calculates the reciprocal of the upper part with Goldschmidt's algorithm, and computes the reciprocal of double precision floating-point number with calculated upper part reciprocal as the initial value is proposed. Since the number of multiplications performed by the proposed algorithm is dependent on the mantissa of floating-point number, the average number of multiplications per an operation is derived from some reciprocal tables with varying sizes.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1998.12a
• /
• pp.137-147
• /
• 1998

RSA 암호 시스템에서 512비트 이상의 큰 정수 소수의 모듈라 멱승 연산이 필요하기 때문에 효율적인 암호화 및 복호화를 위해서는 모듈라 멱승 연산의 고속 처리가 필수적이다. 따라서 본 논문에서는 몫을 추정하여 모듈라 감소를 실행하고 carry-save 덧셈과 중간 곱의 크기를 제한하는 interleaved 모듈라 곱셈 및 감소 기법을 이용하여 모듈라 멱승 연산을 수행하는 고속 모듈라 멱승 연산 프로세서를 논리 자동 합성 기법을 바탕으로 하는 탑다운 선계 방식으로 VHDL을 이용하여 모델링하고 SYNOPSIS 툴을 이용하여 합성 및 검증한 후 XILINX XC4025 FPGA에 구현하여 성능을 평가 및 분석한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.3 s.345
• /
• pp.40-47
• /
• 2006

The finite-field multiplication can be applied to the elliptic curve cryptosystems. However, an efficient algorithm and the hardware design are required since the finite-field multiplication takes much time to compute. In this paper, we propose a radix-4 systolic multiplier on $GF(2^m)$ with comparative area and performance. The algorithm of the proposed standard-basis multiplier is mathematically developed to map on low-cost systolic cells, so that the proposed systolic architecture is suitable for VLSI design. Compared to the bit-parallel, bit-serial and systolic multipliers, the proposed multiplier has relatively effective high performance and low cost. We design and synthesis $GF(2^{193})$ finite-field multiplier using Hynix $0.35{\mu}m$ standard cell library and the maximum clock frequency is 400MHz.

• Journal of Elementary Mathematics Education in Korea
• /
• v.18 no.2
• /
• pp.237-255
• /
• 2014

The purpose of this study is to investigate elementary school students' understanding the concept and operations of decimal fraction. The survey research was performed for this study. This survey was done by selecting 156 students. Questionnaire were made in five areas with reference to the 2007 revised mathematics curriculum. Five areas were the concept of decimal fraction, the addition, the subtraction, the multiplication and the division of decimal fraction. The results of such analysis are as follow: The analyzed result of understanding about concepts and operation of decimal fraction showed a high rate of correct answer, more than 85%. Students thought that multiplication and division of decimal fraction is more difficult than addition, subtraction, concept of decimal fraction. As the learning about concepts and operation of decimal fraction progress, the learning gap is bigger. Effort to reduce the learning deficits are needed in the lower grades. Mathematics is the study of the hierarchical. Learning deficits in low-level interfere with the learning in next-level. Therefore systematic supplementary guidance for a natural number and decimal fraction in low-level is needed. And understanding concepts and principles of calculations should be taught first.