• Journal of Bio-Environment Control
• /
• v.18 no.2
• /
• pp.124-131
• /
• 2009

Surfactant polyvinyl alcohol (PVA-95) 1, 2, 4mg. $L^{-1}$ and calcium lignosulfonate (CLS) 5, 25, 50, 100mg. $L^{-1}$ were treated to the nutrient solution containing 1.0mg. $L^{-1}$ selenium (Se) to evaluate Se absorption effect using small DFT apparatus. The growth of leaf lettuce and pak-choi did not show unique significance by surfactant kinds and concentration in the tested range and physiological disorder. Vitamin C in leaves of two leafy vegetables was not significantly affected by surfactants also. Among major cations K content in pak-choi was highest in Se I+PVA-95 4mg. $L^{-1}$ treatment, and high in Se I+CLS 5 mg. $L^{-1}$ treatment. Ca content in two leafy vegetables showed increasing pattern by the two kinds of surfactants. Mg content was high in Se I+CLS 25mg. $L^{-1}$ treatment compared to control. Pak-choi absorbed Se about 10 times higher than leafy lettuce. Se content in leaves of two leafy vegetables increased by the treatment of two kinds of surfactants with the exception of CLS 100mg. $L^{-1}$ treatment.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.3 s.47
• /
• pp.313-320
• /
• 2004

Human skin is continuously exposed to internal and external influences that may affect its condition and functioning. To maintain and improve skin condition, a wide variety of skin-care products is in the market. However, many of skin problems originate from internal causes, and the new insight into the relation between nutritional factors and skin is now receiving a great attention. Specific positive effects of nutrients or nutraceutical compounds on skin conditions may prove to be biologically relevant and may consequently allow for claims on products containing these compounds, resulting in the development of new functional food for optimal skin condition. In this review, these functions of nutrients and nutraceutical compounds in skin are summarized as providing a basis for the feasibility of the concept of functional foods for maintaining and improving skin condition.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.127-139
• /
• 2010

The concept of Web 2.0, which means that internet users are producers and also consumers is evolved according to the development of web service technology. In the Web 2.0 space, the enormous amount of web contents are produced using many social web services. Proactive display system supports various types of users's web contents. Unfortunately, private web contents sharing facility is imperfect to date. In this paper, we develop a proactive display application which identifies people, displaying their social contents such as blogs and open cafes through wide display devices or multi-media players in physical spaces. For this, we develop a social contents presentation server where users can register their profiles and information on the social contents to be shared through the developed application. Also, we develop a social contents presentation client that proactively identifies the user in close proximity and displays the user's social contents through an intuitive user interface in physical spaces. In addition, we develop an on-the-spot feedback service which supports posting various types of replies and an on-the-spot scrap service which specifies direct sharing of the contents through the intuitive user interface.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.11
• /
• pp.83-94
• /
• 2003

In this paper. a highly linear and low glitch CMOS current mode digital-to-analog converter (DAC) by self calibration bias circuit is proposed. The architecture of the DAC is based on a current steering 6＋4 segmented type and new switching scheme for the current cell matrix, which reduced non-linearity error and graded error. In order to achieve a high performance DAC . novel current cell with a low spurious deglitching circuit and a new inverse thermometer decoder are proposed. The prototype DAC was implemented in a 0.35${\mu}{\textrm}{m}$ n-well CMOS technology. Experimental result show that SFDR is 60 ㏈ when sampling frequency is 32MHz and DAC output frequency is 7.92MHz. The DAC dissipates 46 mW at a 3.3 Volt single power supply and occupies a chip area of 1350${\mu}{\textrm}{m}$ ${\times}$750${\mu}{\textrm}{m}$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.106-114
• /
• 2010

We proposed an unified design methodology and verification platform for giga-scale System on Chip (SoC). According to the growth of VLSI integration, the existing RTL design methodology has a limitation of a production gap because a design complexity increases. A verification methodology need an evolution to overcome a verification gap. The proposed platform includes a high level synthesis, and we develop a power-aware verification platform for low power design and verification automation using it's results. We developed a verification automation and power-aware verification methodology based on control and data flow graph (CDFG) and an abstract level language and RTL. The verification platform includes self-checking and the coverage driven verification methodology. Especially, the number of the random vector decreases minimum 5.75 times with the constrained random vector algorithm which is developed for the power-aware verification. This platform can verify a low power design with a general logic simulator using a power and power cell modeling method. This unified design and verification platform allow automatically to verify, design and synthesis the giga-scale design from the system level to RTL level in the whole design flow.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.7-13
• /
• 2011

This paper presents a Time-to-Digital Converter which is a key block of an All-Digital Phase Locked Loop. In this work, a Vernier Delay Line is added in a conventional Gated Ring Oscillator, so it could get multi-phases and a high resolution. The Gated Ring Oscillator uses 7 unit delay cell, the Vernier Delay Line is used each delay cell. So proposed Time-to-Digital Converter uses total 21 phases. This Time-to-Digital Converter circuit is designed and laid out in $0.13{\mu}m$ 1P-6M CMOS technology. The proposed Time-to-Digital Converter achieves 26ps resolution, maximum input signal frequency is 100MHz and the digital output of proposed Time-to-Digital Converter are 8-bits. The proposed TDC detect 5ns phase difference between Start and Stop signal. A power consumption is 8.4~12.7mW depending on Enable signal width.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.70-75
• /
• 2007

A dual-frequency dual-polarization (DFDP) antenna with high isolation between two ports by embedding $2{\times}1$ mushroom-like electromagnetic bandgap (EBG) cells is proposed. The equivalent circuit of a suspended microstrip line over $2{\times}1$ EBG cells is introduced. The numerical analysis from the equivalent circuit and measured results show that the microstrip line with embedded EBG cells has a distinctive and sharp rejection band and provides near 0 dB insertion loss outside the rejection band. By embedding the EBG cells under feedlines of a conventional DFDP antenna, the isolation between two ports of the antenna is enhanced more than 20 dB, as compared to that of a conventional DFDP antenna. The proposed DFDP antenna is fabricated and measured. The simulated and measured results show a good agreement. The measured polarization purity and gain of the antenna are 25 dB and 5.77 dBi at lower band, and 35 dB and 7.13 dBi at higher band, respectively.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.220-225
• /
• 2016

In this paer, low on-resistance and high-power trench gate MOSFET (Metal-Oxide-Silicon Field Effect Transistor) incorporating current sensing FET (Field Effect Transistor) is proposed and evaluated. The trench gate power MOSFET was fabricated with $0.6{\mu}m$ trench width and $3.0{\mu}m$ cell pitch. Compared with the main switching MOSFET, the on-chip current sensing FET has the same device structure and geometry. In order to improve cell density and device reliability, self-aligned trench etching and hydrogen annealing techniques were performed. Moreover, maintaining low threshold voltage and simultaneously improving gate oxide relialility, the stacked gate oxide structure combining thermal and CVD (chemical vapor deposition) oxides was adopted. The on-resistance and breakdown voltage of the high density trench gate device were evaluated $24m{\Omega}$ and 100 V, respectively. The measured current sensing ratio and it's variation depending on the gate voltage were approximately 70:1 and less than 5.6 %.

• Culinary science and hospitality research
• /
• v.19 no.5
• /
• pp.100-109
• /
• 2013

This study aims to analyze 19 kinds of mineral contents in hair targeting 311 people in Seoul who suffer from hair loss. The results are as follows: 1. The average contents of all kinds of minerals were within the standards. 2. Sodium, potassium, and selenium were more detected in men than in women; calcium, magnesium, copper, and manganese were more detected in women than in men; toxic elements, mercury, antimony, and arsenic were more detected in men than in women, which was statistically significant. 3. As the age increased, potassium (p<.05), iron (p<.01), manganese (p<.05), chromium (p<.01), and mercury (P<0.01) increased gradually, which was statistically significant. In particular, the content of mercury exceeded its standard in those over fifty. 4. Selenium (p<.01), lead (p<.05), aluminum (p<.05), and arsenic (p<.01) were more detected in natural hair than in permanent or colored hair. Calcium (p<.001), magnesium (p<.001), and manganese (p<.01) were more detected in permanent or colored hair than in natural hair. They were all statistically significant.

• Journal of the Korean Magnetics Society
• /
• v.17 no.4
• /
• pp.172-177
• /
• 2007

In order to detect of the magnetic property in the cell unit, we studied the GMR-SV (giant magnetoresistance-spin valves) biosensor, which was depended on the micro patterned features according to two easy directions of longitudinal and transversal axes. Here, the multi layer structure was glass/NiO/NiFe/CoFe/Cu/CoFe/NiFe. The uniaxial anisotropy direction was applied to the patterned biosensor during the deposition and vacuum post-annealing at $200^{\circ}C$ under the magnitude of 300 Oe, respectively. Considering the magnetic shape anisotropy effect, the size of micro patterned biosensor was a $2{\times}5{\mu}m^2$ after the photo lithography process. By our experimental results, we confirmed that the best condition of GMR-SV biosensor should be the same direction of the axis sensing current and the easy axis of pinned NiO/NiFe/CoFe triple layer oriented to the width direction of device, and the direction of the easy axis of free CoFe/NiFe bilayer was according to the longitudinal direction of device.