• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.3
• /
• pp.341-349
• /
• 2017

Blood decontamination is an important factor in success of the orthodontic bracket. The purpose of this study is to evaluate the shear bond strength affected by blood decontamination. The shear bond strength was measured on blood decontamination before and after primer photopolymerization. And the adhesive remnants type and surface patterns was evaluated under scanning electron microscopy. A total of 50 human premolars were prepared. Group I was attached using conventional resin-acid etching method as control group. Group II and III were blood contaminated before curing primer and groups IV and V were blood contaminated after curing primer. Group II and IV were treated only with cotton pellet and Groups III and V were treated with cotton pellet after water washing. The mean shear bond strengths were in the order of groups I, V, III, II, and IV. In scanning electron micrographs group III and V showed more uniform surface than group II and IV. The ARI was significantly different between the control group and the experimental groups (p <0.05).

• Knowledge Management Research
• /
• v.21 no.3
• /
• pp.67-87
• /
• 2020

Maintaining active users who repeatedly share high-quality knowledge is critical for the success of online Q&A sites. This study suggests two paths that lead to active users' continuous knowledge sharing: 1) elaborated decision process, represented by continuance intention, and 2) automated cognitive process, represented by past behavior. The direct and moderating effects of continuance intention and past behavior were verified by analyzing subjective intention data and objective behavior data of 333 active users of Naver Knowledge-iN. Using Cox proportional hazards regression and negative binomial regression, the influences of continuance intention and past behavior on two types of continuous knowledge sharing were examined. The results showed that only past behavior was significantly influential on knowledge sharing continuance and as to the frequency of knowledge sharing, both continuance intention and past behavior's influences were significant. It was also confirmed that past behavior negatively moderates continuance intention's effect on the frequency of knowledge sharing. In order to maintain active users' continuous knowledge sharing, it is important to habituate knowledge sharing through repetitive knowledge sharing behavior. And in order to increase the frequency of knowledge sharing, in addition to the habituation, appropriate benefits that can increase the continuance intention should be provided.

• Journal of the Korean association of regional geographers
• /
• v.23 no.1
• /
• pp.89-105
• /
• 2017

This research was conducted to analyse how a community building around empowerment changes the resident's cognition depending on level of their participation. 'Livable hope community building project' in Gonju-Shi, Chungcheongnam-Do was chosen as an example case. As a result of analyzing influence of residents' participation on their cognition changes, the residents with higher level of participation had bigger changes in cognition in terms of individual and relational aspects. In detail, the residents with one time of participation in livable hope community building activity showed a change in cognition in a way that they realized the reality of the rural area and felt the necessity of community building to overcome this. The residents with more than 3 times of participation had cognitional change on current status of village where they are living in. Lastly, the greatest cognitional changes in all perspectives occurred among the residents with more than 5 times of participation. They had a firm cognition that the participation and cooperation of the residents are important to make community building successful. Conclusively, community building around empowerment influences recovery of rural community as it changes cognition of residents and acts as a mediator for resident unity. Therefore, it is expected will bring new changes to rural area, help recover rural community, and affect improvement of rural competitiveness.

• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.361-367
• /
• 2004

The axial compressive strength, relative 3-D stability and osteoconductive shape design of an intervertebral fusion cage are important biomechanical factors for successful intervertebral fusion. Changes in the stress distribution of the vertebral end plate and in cage stability due to changes in the spike shape of a newly contrived box-shaped fusion cage are investigated. In this investigation, the initial contact of the cage's spikes with the end plate and the penetration of the cage's spikes into the end plate are considered. The finite element analysis is conducted to study the effects of the cage's spike height, tip width and angle on the stress distribution of the vertebral end plate, and the micromigration of the cage in the A-P direction. The stress distribution in the end plate is examined when a normal load of 1700N is applied to the vertebra after inserting 2 cages. The micromigration of the cage is examined when a pull out load of l00N is applied in the A-P direction. The analysis results reveal that the spike tip width significantly influences the stress concentration in the end plate, but the spike height and angle do not significantly influence the stress distribution in the end plate touching the cage's spikes. In addition, the analysis results show that the micromigration of the cage can be reduced by adjusting the spike angle and spike arrangement in the A-P direction. This study proposes the optimal shape of an intervertebral fusion cage, which promotes bone fusion, reduces the stress concentration in a vertebral end plate, and increases mechanical stability.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.11 no.1
• /
• pp.7-22
• /
• 1981

A morphological and positional classification was undertaken in the transcranial and transorbital views of 174 traceable films which had been selected from those of 274 patients and previous tracing was performed. For the positional analysis, the author adopted the method which is not influenced by TMJ remodelling, and for the morphological classification, made progress the general method by adding indefinite type to four basic types. The aims of this sutudy consists in performing positional and morphological analysis of condylar head and in its morphological and positional variation in symptomatic patients. I want to express my sincere gratitude to Prof. Park, Tae Won in Seoul National University, interesting me in this field researches and for his never failing interests. I would lide to thank Prof. Ahn, Hyung Kyu and Prof. You, Dong Soo for helpful discussion and critical readings. The author is also indebted to Prof. Fuchihate Hajime in Osaka University, Prof. Uemura, Shusaburo and the late Dr. Nishihara, Heihachi for fruitful discussion and encourgements.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2002.08a
• /
• pp.13-31
• /
• 2002

쌀은 중국에서 중요한 식량작물로 제9차 5개년 계획(1966-2000년) 동안 재배면적 31.4백만 ha이며 생산량은 단위 ha당 6,303kg으로 198백만톤에 이르며 이는 재배면적으로는 식량작물의 27.7%, 그리고 생산량으로는 전체식량작물의 40%를 각각 점하고 있다. 이러한 재배면적과 생산량은 각각 세계전체면적과 생산량의 20.7%와 33.7%를 차지하는 많은 량이다. 중국의 남부지역은 전지역의 73.5%가 이모작으로 재배되며 주품종은 Indica이다. 중국의 중부지역은 이모작과 일모작의 재배형태가 2:3으로 공존하고 있으며 양쯔강 이북은 주로 일모작의 형태이다. 중국의 쌀 재배면적은 1960년대 이후 점차 증가하다가 1980년대 후반으로 정체되었다가 최근 90년대 말에 이르러서는 재배면적의 감소가 가속화되고 있으나 단보당 생산량은 꾸준히 증가하고 있다. 2001년 중국의 쌀소비량은 138백만톤으로 이의 85.2%는 식량용으로, 5.8%는 사료용으로, 1.3%는 가공용, 1.5-2.0%는 수출용으로 그리고 1.2%는 종자용으로 소비되었다. WTO체제에 들어서도 중국의 쌀 생산에는 크게 영향을 받지않을 것으로 여겨지는데 그 이유로는 충분한 생산능려과 자급률, 쌀의 낮은(4%) 국제교역비율, 총생산량에 대한 낮은 쿼터비율 등을 들 수 있다. 그러나 WTO체제 가입에 따른 압력 또한 존재하는 것이 사실인데 그것은 낮은 품질, 국제가격보다 높은 국내가격 등을 들 수 있다. 향후 중국 쌀의 발전적 전략들로는 쌀의 안정적 발전을 지속하는 일, 쌀 재배구조 조정과 함께 높은 미질을 가지는 품종육종, 기계화를 비롯한 경작기술의 발달, 쌀과 부산물 가공기술의 개발연구, 특징 기능을 함유하는 유전공학적 기술의 적용, 토지와 도시화 그리고 식량순환에 시스템의 개혁 등 과학기술을 고양하는 일 등을 들 수 있다.TEX>$\times$10cm의 소식일수록 짧아서 재식주수와 경장은 정의상관이 인정되었다. 9 경직경은 30$\times$10cm, 40$\times$10cm의 소식일수록 크고 20$\times$10cm의 밀식일수록 작았다 10. 수량구성요소인 주근장과 수량인 건근중은 30$\times$10cm, 40$\times$10cm의 재식주수가 적을수록 높아서 재식주수와는 부의 상관이 인정되었다. 11 이상과 같은 결과로 보아 경직경이 크고 주근장이 길어서 10a당 건근중이 많은 30$\times$10cm(33주/$m^2$)가 알맞은 재식거리였다.에 대한 인식을 새롭게 하고 농약취급시의 건강장해예방행동을 촉구하는 등의 효과도 높은 것으로 예방의학적인 유용성이 크다고 볼 수 있다. 미침을 알 수 있었다. 대두 단백질로 코팅된 golden delicious는 상온에서60일 동안 보관하였을 경우, 사과표피의 색도 변화를 현저히 지연시킴을 확인하였다. 또한 control과 비교하여 성공적으로 사과에 코팅하였으며, 상온에서 보관하여을 때 사과의 품질을 30일 이상 연장하는 효과를 관찰하였다. 이들 결과로부터 대두단백질 필름이 과일 등의 포장제로서 이용할 가능성을 확인하였다.로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elements)로 가정한다. 즉, [+wh] 의미의 겹의문사는 동일한 구성요 소를 지닌 병렬적 합성어([$

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7549-7554
• /
• 2015

The aim of this study was to develop gastric retentive bi-layered tablet using floating drug delivery technique. Metformin was selected as a model drug due to its narrow absorption window as well as very highly water solubility. These properties of metformin led to be difficult controlling the drug release. The bi-layered tablet was prepared with bi-layered compression machine to minimize interference between floating part and controlling part. The tablet weight, appearance and hardness were evaluated after compression process. The times of 'time to floating' and 'Floating duration' were tested for floating ability and drug release study was also carried out to understand drug release behavior. Furthermore, the drug release of bi-layered tablet was compared with marketed metformin tablet with sustained release pattern (Glucopharge XR$^{(R)}$).The floating ability and drug release behaviors were well controlled by changing amounts of $NaHCO_3$ (floating substance) and hydroxypropyl methylcellulose (HPMC; release control material). Bi-layered tablet had 13s of time to float, over 10h of floating duration and very similar drug release behavior compared with Glucopharge XR$^{(R)}$($f_2$: 89.6). Consequently, the bi-layered tablet with floating ability was successfully prepared and these properties can maximize the efficacy of metformin.

• Journal of the Korean association of regional geographers
• /
• v.20 no.2
• /
• pp.189-205
• /
• 2014

Most local governments make an attempt to attract tourists through the large-scale development projects or regional festival events. But, its possibility of success is actually low, so they must take care of ecotourism industry which has higher efficiency in comparison with investing expense. Seocheon area couldn't be focused greatly in spite of the excellent ecological and cultural resources. However, there are lots of possibilities to be a new center of ecotourism because of newly opened National Institute of Ecology and National Marine Biology Resource Institute. Therefore, the purposes of this thesis are to analyze several eco-cultural property all over Seocheon, introduce ecotourism, a main function of ecosystem services, and develop the program satisfying 3 elements of ecotourism; natural environment, visitors and residents. In Seocheon located in where the sea meets the river, ecological property could be reorganized into 4 areas in relation to existing famous tourist attractions. As a measure to let visitors stay, we induced them to lodge in the region through the field work. To realize slow life, we designed it so that they can enjoy each landscape slowly. we also suggested the program which can guide visitors onto the vicinity of habitat for migratory birds at the mouth of Geumgang River and Seocheon foreshore nominated as Ramsar wetlands by focusing on National Institute of Ecology and National Marine Biology Resource Institute which will be the Mecca of ecology research. Through this research, there will be an opportunity to satisfy visitors of Seocheon and enrich local residents' lives.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.129-134
• /
• 1996

1차 년도 G-7 개발 과제로 수행된 자기 공명 진단 장치 (Magnetic Resonance Imaging System)의 개발 내용을 간략히 소개하였다. 성공적인 IT Compact 자기 공명 진단 장치의 완성을 위해 일차적으로 (1)RF (고주파), Gradient(경사 자계), Spectrometer 등의 Hard-ware 관련 MRI 핵심부분, (2) RF, Gradient, Spectrometer, Magnet 등의 각 Sub-system을 연결, 조합, 조정하여 하나의 체계적인 시스템으로 통합하고 운영하는 과정(System Integration), (3)사용자와 시스템을 연결하는 User Interface, Data Base Management, Real time 운영 SW 등과 (4)임상에 적용하여 구체적인 성능과 효용성을 확인하는 기술 등에 대하여 집중 연구하였다. 개발 방법은 (1)지난 16년간 국내에 축적 된 연구 개발 인력들을 최대한 활용하고 (2)연구 개발을 국제화 시켜 필요한 경우 부분별로 개발 인력을 해외에서 보완하고 (3)소수 정예 전문 인력 주의와 요소 기술 또는 중요 부품을 경쟁성 검토 후 필요 시 Out-sourcing 활용으로 최저의 비용으로 개발 기간을 최소화 하는 데 두었다. 개발된 1.0Tesla자기 공명 영상 장치는 미국 물리 학회에서 규격화한 Phantom및 임상 적용을 통하여 서울대 의대 연구 팀과 지속적으로 성능을 평가해 왔다. 개발된 시스템의 해상도는 $256{\times}256$ head 영상에서 1mm 이 하의 해상도를 가짐을 resolution phantom 을 통하여 확인할 수 있었고, $512{\times}512$ 영상에서 는 약 0.5 mm 의 물체를 분리 해냄으로써 외제 시스템들 보다 우수하게 평가 되었다. 차폐 경사코일의 Eddy current영향은2%이내로 촬영 시 영향은 거의 무시할 수 있었다. 또한, 개발된 영상 기법들, 즉 Multislice/Multi Echo, Oblique angle imaging, 64 Echo train을 갖는 고속 촬영 기술들이 자기 공명 장치에 장착되어 임상 적용에 문제가 없도록 하였다. 또한 20mT/m/Amp의 강력한 능동 차폐 경사 자계 코일(Active Shield Gradient Coil)을 기본 사양으로 하고, 수신단을 최대 6개로 확장토록 하여 2차년도의 초고속 촬영 기법(EPI) 및 Phased Array 코일 촬영이 가능토록 하였다. 1차 년도 개발 과제 수행 결과와 향후 개발 과제를 바탕으로 최종 목표인 국제 경쟁력이 있는 자기 공명 진단 장치 즉 기능과 영상의 질은 선진국 제품과 동일하거나 우수하되, 저가격을 구현한 상용화 제품이 완성되어, 첨단 의료기기로서 산업 구조 고도화에 기여하고 수입대체 뿐만 아니 라 수출을 통한 국익 창출과 국가의 기술을 통한 위상 제고에 기여되길 기대한다.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_3
• /
• pp.1405-1423
• /
• 2021

Precipitation is one of the main factors that affect water and energy cycles, and its estimation plays a very important role in securing water resources and timely responding to water disasters. Satellite-based quantitative precipitation estimation (QPE) has the advantage of covering large areas at high spatiotemporal resolution. In this study, machine learning-based rainfall intensity models were developed using Himawari-8 Advanced Himawari Imager (AHI) water vapor channel (6.7 ㎛), infrared channel (10.8 ㎛), and weather radar Column Max (CMAX) composite data based on random forest (RF). The target variables were weather radar reflectivity (dBZ) and rainfall intensity (mm/hr) converted by the Z-R relationship. The results showed that the model which learned CMAX reflectivity produced the Critical Success Index (CSI) of 0.34 and the Mean-Absolute-Error (MAE) of 4.82 mm/hr. When compared to the GeoKompsat-2 and Precipitation Estimation from Remotely Sensed Information Using Artificial Neural Networks (PERSIANN)-Cloud Classification System (CCS) rainfall intensity products, the accuracies improved by 21.73% and 10.81% for CSI, and 31.33% and 23.49% for MAE, respectively. The spatial distribution of the estimated rainfall intensity was much more similar to the radar data than the existing products.