• Korean Journal of Construction Engineering and Management
• /
• v.11 no.3
• /
• pp.23-32
• /
• 2010

Construction Projects have mutual collaborative structures among various participants for common objectives. Most of all the design project which is the initial phase in the project is crucial for determining project overall quality and requires intimate and continuous relations between project participants. Thus, this study suggests Design Collaboration Management System for successful performing projects through cooperation among participants in the initial stage of projects. First, expert interviews were performed to figure out present conditions of design collaboration management and problems. The factor analysis was applied to draw owner's collaboration factors and engineer's collaboration factors. Based on those factors, this study suggests design cooperation management process which gives a framework for systematic management method. Through the process the design collaboration management system was developed which helps owner/designers/engineer's co-work. The System suggested from this study realizes systematic information management tool and through that it is expected to improve design product;'s quality, and further contribute the advancement of project.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.3
• /
• pp.37-42
• /
• 2022

Recently, the semiconductor package structures are becoming thinner and more complex. As the thickness decrease, interfacial delamination due to material mismatch can be further maximized, so the reliability of interface is a critical issue in industry field. Especially, the polymers, which are widely used in semiconductor packaging, are significantly affected by the temperature and moisture. Therefore, in this study, the delamination prediction at the interface of package structure was performed through finite element analysis considering the moisture absorption and desorption under the various temperature conditions. The material properties such as diffusivity and saturated moisture content were obtained from moisture absorption test. The hygro-swelling coefficients of each material were analyzed through TMA and TGA after the moisture absorption. The micro-shear test was conducted to evaluate the adhesion strength of each interface at various temperatures considering the moisture effect. The finite element analysis of interfacial delamination was performed that considers both deformation due to temperature and moisture absorption. Consequently, the interfacial delamination was successfully predicted in consideration of the in-situ moisture desorption and temperature behavior during the reflow process.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2003.11a
• /
• pp.577-588
• /
• 2003

정보기술의 급진적인 발달로 경쟁이 점점 심화되어져 가고 있는 환경 속에서 경쟁적 우위를 갖기 위한 기업들의 끊임없는 노력은 계속 되고 있다 이러한 시점에 ERP(Enterprise Resource Planning: 전사적 자원관리) 시스템은 기업의 경쟁력을 재고하고 변화하는 비즈니스 환경을 예측하여 신속하고 현명하게 대처하기 위한 수단으로서의 역할을 수행하고 있으며 최근 기업뿐만 아니라 대학에서도 이에 대한 관심이 확산되고 있다. 이미 국외의 많은 대학들이 ERP 시스템을 도입한 실정이고, 국내에서는 정보화 사업의 일환으로 연세대학교가 일반 행정 업무의 효율화를 위해 SAP R/3를 도입했고 향후 학사 행정 시스템과의 통합을 모색 중이다. 정부에서도 국·공립 대학들의 행정업무효율성 제고를 위해 차세대 행정업무시스템으로 ERP 시스템 도입을 본격화하고 있다. 따라서 본 논문에서는 정보화를 추진하고자 하는 국내 대학에 ERP 시스템의 도입을 제안하였고, 기존에 선행 연구된 연구자료를 비교·분석하여 기업의 ERP 시스템 구축 성공요인을 정리하였다. 국내 대학은 ERP 시스템 도입 시 제시된 주요성공요인 등을 고려하고 지속적인 관심으로 프로젝트를 수행함으로써 보다 효과적으로 구축을 완료해야 할 것이며, 아직 국내의 사례가 충분하지 않기 때문에 본 논문에서 제시한 국내외의 사례를 살펴봄으로써 대학의 ERP 시스템 도입에 관해 빠른 이해를 할 수 있을 것이다. 끝으로 본 논문은 초기단계에 있는 국내 대학의 ERP 시스템 도입에 대학이 나가야 할 방향을 제시하였고, 앞으로 국내 대학의 ERP 시스템 도입이 증가할수록 이에 대한 연구도 계속 되어야 할 것이다.보다 더 높게 나타난 반면에, 실무계 전문가 집단은 비용이 정보시스템 보다 더 높게 나타났다는 것이다.리적 특성이론과 사용자 수용이론으로 구분하여 이 특성에 따라서 향후 개발될 3D 핸드폰 아바타의 수용도의 관계를 파악하고자 한다. 본 연구에 대한 자료 수집방법은 D대학교의 교양과목인 “사이버문화의 이해와 활용”을 수강하는 학생들을 대상으로 총 170부를 설문 조사하였으며, 수집된 설문지 중에서 불성실하게 응답한 설문지 6부를 제외한 총 164부를 유효한 설문으로 확보하였다. SPSSWIN 10.0 패키지를 이용하였으며, Cronbach's Alpha값을 통한 신뢰도 분석과 요인분석을 통한 타당성 분석을 하고, 연구변수로 선정한 각 요소들의 아바타 수용도에 미치는 영향력 정도를 파악하기 위해 회귀분석을 실시하였다. 그 결과 심리적 특성과 사용자 수용 특성은 아바타 수용도에 부분적으로 영향을 미친다는 것 결과가 나타났다.웨어 프로세스 평가와 개선 모델의 개발을 위한 기초적인 자료를 제공할 것으로 예상된다 또한, 본 연구 결과는, 우리나라 소프트웨어 조직들이 실제로 무엇을 필요로 하는지를 밝힘으로써, 우리나라의 소프트웨어 산업을 육성하기 위한 실효성 있는 정책 입안을 위한 기초 자료를 제공할 것으로 예상된다.다.를 검증하려고 한다. 협력체계 확립, ${\circled}3$ 전문인력 확보 및 인력구성 조정, 그리고 ${\circled}4$ 방문보건사업의 강화 등이다., 대사(代謝)와 관계(關係)있음을 시사(示唆)해 주고 있다.ble nutrient (TDN) was highest in booting stage (59.7%);

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.2
• /
• pp.107-117
• /
• 2004

If doubtlessly contributes much to agriculture and rural development. The roles can be summarized as; 1. to activate rural areas and to provide more comfortable and safe rural life with equivalent services to those in urban areas, facilitating distance education, tole-medicine, remote public services, remote entertainment etc. 2. To initiate new agricultural and rural business such as e-commerce, real estate business for satellite officies, rural tourism and virtual corporation of small-scale farms. 3. To support policy-making and evaluation on optimal farm production, disaster management, effective agro-environmental resource management etc., providing tools such as GIS. 4. To improve farm management and farming technologies by efficient farm management, risk management, effective information or knowledge transfer etc., realizing competitive and sustainable farming with safe products. 5. To provide systems and tools to secure food traceability and reliability that has been an emerging issue concerning farm products since serious contamination such as BSE and chicken flu was detected. 6. To take an important and key role for industrialization of farming or lam business enterprise, combining the above roles.

• Journal of Korea Multimedia Society
• /
• v.10 no.7
• /
• pp.902-911
• /
• 2007

GSM platform is a hugely successful wireless technology and an unprecedented story of global achievement. In less than ten years since the first GSM network was commercially launched, it became the world's leading and fastest growing mobile standard, using over 1 billion GSM subscribers across more than 200 countries of the world. GSM platform evolved into 3th generation mobile communication which includes not only voice call services but also the international roaming and various kinds of the multimedia services. GSM is an essential element techniques a safe data transmission and a personal private protection while support services. However, a crypto algorithm and a secure protocol for a safe data communication using GSM are indicating various kinds of problems. In this paper, we propose a more safer and more efficient authentication protocol in 3th generation network through analysis of GSM security mechanism of 2th/2.5th generation. This security protocol offers enforced security efficiency by using user verification between SIM/ME and reduction of authentication and key agreement step between SIM/ME/AuC.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.3
• /
• pp.3-12
• /
• 2010

Recently, workers on construction sites can hardly understand their tasks and the process of the tasks because the construction projects are becoming large and complex. Due to the complexity, workers need a tool that can help them understand their works and some paper-based manuals exist to support them. However, the existing paperbased manuals are not actively used by workers due to the low credibility of information on the manual. In particular, paper-based manual can not be updated frequently because those manuals have to be manually updated by experts. Thus, the credibility of information is decreased and the decrease let the users distrust information of the paper-based manual. Therefore, this research analyzed the feature of wiki-based system and suggested an wiki-based IETM(Interactive Electronic Technical Manual) system model that can be modified by users, and then conducted a survey through a prototype based on urban regeneration project. The result of the survey indicated that wikibased IETM can improve the stakeholder communication by reinforcing the process of creating knowledge as well as knowledge itself.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.147-161
• /
• 2012

This study is to assess the effect of horizontal misfit of an implant supported 3-unit fixed prosthodontics on the stress development at the marginal cortical bone surrounding implant neck. Two finite element models consisting of a three unit fixed prosthodontics and an implant/bone complex were constructed on a three dimensional basis. The three unit fixed prosthodontics were designed either shorter (d=17.8mm model) or longer (d=18.0mm model) by 0.1mm than the span of two implants placed at the mandibular second premolar and second molar areas 17.9mm apart. Fitting of the fixed prosthodontics onto the implant abutments was simulated by a total of 6 steps, that is to say, 0.1mm displacement per each step, using DEFORM 3D (ver 6.1, SFTC, Columbus, OH, USA) program. Stresses in the fixed prosthodontics and implants were evaluated using von-Mises stress, maximum compressive stress, and radial stress as necessary. The d=17.8mm model assembled successfully on to the implant abutments while d=18.0mm model did not. Regardless if the fixed prosthodontics fitted onto the abutments or not, excessively higher stresses developed during the course of assembly trial and thereafter. On the marginal cortical bone around implants during the assembly, the peak tensile and compressive stresses were as high as 186.9MPa and 114.1MPa, respectively, even after the final sitting of the fixed prosthodontics (for d=17.8mm model). For this case, the area of marginal bone subject to compressive stresses above 55MPa, equivalent of the $4,000{\mu}{\varepsilon}$, i.e. the reported threshold strain to inhibit physiological remodeling of human cortical bone, extended up to 2mm away from implant during the assembly. Horizontal misfit of 0.1mm can produce excessively high stresses on the marginal cortical bone not only during the fixed prosthodontics assembly but also thereafter.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.3
• /
• pp.11-22
• /
• 2018

Existing efforts to reduce total egress time actually focused on reducing travel time. However, consideration to reduce perception time or response time was insufficient although the ratio of travel time is one-third of total egress time and situations which the safety cannot be ensured by only reducing travel time were aroused. Therefore, the concept of disaster information, which could reduce both perception time and response time got attention To analyze the effect of disaster information on occupant behaviour, this study identified a relationship between 10 major disaster information and 3 occupant behaviour factors in terms of reducing egress time. By referring the relationship, this study conducted an virtual egress experiment with survey on 4 cases, the elderly, intellectual disabled, hearing disabled and visual disabled, to identify disaster information which reduce total egress time effectively. Finally, by analyzing the experiment result, this study proposed the process of disaster information effect on occupant behaviour as complementing insufficient occupant behaviour to ensure the minimum level of safety and maximizing relatively high occupant behaviour to ensure enough level of safety. The results are expected to account for relationship between disaster information and occupant behaviour with more explanatory power in terms of egress time. With further studies of disaster information and group behaviour, these series of studies could provide basic references for disaster information and occupant behaviour.

• Journal of Korean Home Economics Education Association
• /
• v.23 no.3
• /
• pp.161-183
• /
• 2011

This study aims to design, develop the impact of a high school course in practical problem- focused teaching plan which will enable students to deal with an aging society, and prepare well for the aging by looking at issues the elderly face. This study set a target of analyzing the 2007 revised curriculum manual to develop instructor-led teaching and learning plans for 'Successful aging preparation'. Five common subjects were reframed on a practical problem basis through factor analysis of preliminary research regarding aging education for teenagers and the 2007 revised curriculum and textbooks of Technology Home Economics, and Human Development. The practical problem was 'What do we need to do to Successfully live an independent life in aging?', and the subjects studied to answer this question were the aging society and population changes. the nature of the elderly, aging preparation, care of the elderly, and welfare services for the elderly. These five subjects were grouped under the main categories of The Aging Society. Understanding the Elderly, and aging Preparation. The ultimate objective of the lessons was, through critical reasoning, to inquire into the causes of current problems the elderly face so that teenagers can understand aging societies and the elderly, and prepare for a Successful aging. Another objective was to seek reasonable alternatives for teenagers as they prepare for Successful and independent aging, and increase their problem-solving abilities in choosing the best course of action by considering the ripple effect of consequences of each of those alternatives. The practical problem-teaching lesson plans consisted of five classes on practical reasoning instruction. This study suggests that new high school curricula should include lessons on preparation for aging so that students can deal successfully with our aging society.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.109-123
• /
• 2009

The aim of the study was to assess the influence of insertion torque of bone quality and to compare axial force, moment and von Mises stress using finite element analysis of plastoelastic property for bone stress and strain by dividing bone quality to its thickness of cortical bone, density of trabecular bone and existence of lower cortical bone when implant inserted to mandibular premolar region. The $Br{\aa}nemark$ MKIII. RP implant and cylindrical bone finite model were designed as cortical bone at upper border and trabecular bone below the cortical bone. 7 models were made according to thickness of cortical bone, density of trabecular bone and bicortical anchorage and von Mises stress, axial force and moment were compared by running time. Dividing the insertion time, it seemed 300msec that inferior border of implant flange impinged the upper border of bone, 550msec that implant flange placed in middle of upper border and 800msec that superior border of implant flange was at the same level as bone surface. The maximum axial force peak was at about 500msec, and maximum moment peak was at about 800msec. The correlation of von Mises stress distribution was seen at both peak level. The following findings were appeared by the study which compared the axial force by its each area. The axial force was measured highest when $Br{\aa}nemark$ MKIII implant flange inserts the cortical bone. And maximal moment was measured highest after axial force suddenly decreased when the flange impinged at upper border and the concentration of von Mises stress distribution was at the same site. When implant was placed, the axial force and moment was measured high as the cortical bone got thicker and the force concentrated at the cortical bone site. The influence of density in trabecular bone to axial force was less when cortical bone was 1.5 mm thick but it might be more affected when the thickness was 0.5 mm. The total axial force with bicortical anchorage, was similar when upper border thickness was the same. But at the lower border the axial force of bicortical model was higher than that of monocortical model. Within the limitation of this FEA study, the insertion torque was most affected by the thickness of cortical bone when it was placed the $Br{\aa}nemark$ MKIII implant in premolar region of mandible.