• Title/Summary/Keyword: 설치비율

Search Result 577, Processing Time 0.044 seconds

Study on the method to evaluate performance of Light Collector in Light-collecting System (집광채광 설비 입사부의 성능 평가방법에 관한 연구)

  • Yoon, Yongsang;Mun, Sunhye
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2011.11a
    • /
    • pp.49.1-49.1
    • /
    • 2011
  • 집광채광 설비는 건축물의 조명에너지 절감 및 자연광의 실내 유입을 위해 적용 가능한 태양에너지설비로써 다른 신 재생 에너지 설비와 다르게 연간에너지생산에 대한 정량적 데이터가 아직까지 부재하다. 집광채광 설비의 설치효과를 판단하기 위해서는 집광채광 설비 설치에 따른 연간 에너지생산량 산출이 필요하며, 이를 위해서는 각 구성부분(집광부, 전송부 및 산광부)의 광전송 효율에 대한 데이터가 구축되어야 한다. 본 연구는 집광채광 설비의 효율 분석에 관한 첫 번째 단계로써 외부광속에 대한 집광부 통과 직후의 내부광속의 비율을 예측하였다. 국내에 보급된 집광채광 설비는 대부분 프리즘형과 광덕트형이며, 우선적으로 집광부 입사면의 경사각과 방위각이 다양하여 내부광속 산출방법론이 매우 복잡한 프리즘형을 분석대상으로 삼았다. 전일사량, 외부조도 및 집광부 내부조도가 측정되었으며, 외부광속으로부터 내부광속을 산출하는 공식을 유도하기 위해 천공상태에 따라 전일사량 측정치가 직산분리 되었다. Perez model과 Liu and Jordon에 의해 제시된 계산식과 입사면 및 집광부 면적을 고려하여 수평면 외부조도 측정치로부터 외부광속이 그리고 내부조도로부터 내부광속이 산출되었다. 입사면의 투과율이 동일하다는 전제 하에 천공상태에 따른 태양광 투과 비율을 도출한 결과, 담천공(Kt ${\leq}$ 0.3)에서 0.39, 부분담천공(0.3${\geq}$ 0.78)에서 1.0으로 나타났다. 도출된 투과비율을 외부광속에 적용하여 내부광속을 계산한 결과치와 측정치는 약 ${\pm}9%$ 정도의 차이를 보였다. 연간 기상데이터에 위와 같은 방법론이 적용되면 프리즘형 집광부의 연간 내부광속이 산출될 수 있다. 또한 기존 연구에서 제시된 발광효율 산출식과 일사 파장에 따른 시감도를 고려하면 매 시간별 외부조도도 산출이 가능하다. 일사량 측정치와 외부조도 측정치 사이의 상관관계를 분석한 결과 결정계수 $R^2$이 0.99인데 반해 일사량 측정치와 외부조도 계산치 사이의 상관관계 결정계수는 0.95로 측정치 보다 약간 작은 값을 갖는다. 이렇게 산출된 외부조도는 각 입사면의 면적을 반영하여 외부광속으로 변환되고, 앞서 산출된 천공상태별 투과비율이 적용됨으로써 내부광속이 도출될 수 있다. 이와 같은 집광부에 대한 연구를 바탕으로 향후 전송부와 산광부 효율을 도출하고 궁극적으로 집광채광 설비를 통해 실내에 전달되는 연간 빛에너지를 예측할 수 있을 것이다. 또한 본 연구의 방법론은 다른 형태의 집광채광 설비에도 적용이 가능할 것으로 판단되며, 국내 집광채광 설비의 연간 에너지생산량에 대한 폭 넓은 데이터 구축이 가능할 것으로 기대된다.

  • PDF

Developing a method to estimate vehicle speeds in a low-cost vehicle detector with an inclined sensor (사선형 센서를 이용한 저가 검지장비의 차량속도 추정방법 개발)

  • Kim, Hyoung-Soo;Oh, Ju-Sam
    • International Journal of Highway Engineering
    • /
    • v.11 no.1
    • /
    • pp.59-67
    • /
    • 2009
  • With the development of high-cost vehicle detectors, low-cost detectors have also been studied due to the advantage that more detectors are provided within limited budgets. This study proposed a method to estimate vehicle speeds using vehicles' track data from auto manufacturers and time stamps obtained when vehicles' tires pass an inclined sensor (here, a tape switch sensor). In speed estimation, small vehicles and large vehicles is distinguished according to the ratio of time stamps for a wheelbase and a rear track obtained from a tape switch sensor. In particular, speed estimation can be adjusted through a parameter to determine vehicles' size so as to take into account location properties such as vehicles' classification ratio. The low-cost vehicle detector with an inclined sensor proposed in this study is expected to be widely utilized to monitor traffic conditions thanks to low cost.

  • PDF

Evaluating the Safety Effects of Dynamic Message in a Work Zone: A Case Study (도로 공사구간 동적표지판 안전효과 평가: 사례 연구)

  • Moon, Jae-Pil;Lee, Suk-Ki;Cho, Jung-Ho
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.18 no.3
    • /
    • pp.46-57
    • /
    • 2019
  • Generally speeding appeared to be the most contributing factor of fatalities occurred in work zones, and highway agencies in South Korea have concerned of the safety of workers and drivers in the poor circumstances. In this study, a portable variable message signs (PVMS) system as an alternative of control speeding in work zones was implemented. This study evaluated the safety effectiveness of the PVMS based on speeds and the compliance with the speed limit. Linear regression and logistic regression models were adopted to quantify the safety effect of the PVMS between the 'before' and 'after'. The results showed that most of points had statistically significant speeds reduction experience after PVMS installation. Also, the percentage of vehicle exceeding the speed limit by 10 km/h or more was decreased significantly between 50 and 80% in the 'after' periods compared to the 'before' periods. Therefore, the PVMS would be contributed to benefit safety in work zones which there is a difference in design speed of the adjacent normal section.

Study on the Installation warrants of staggered crosswalk traffic island on Urban Streets - Focusing on pedestrian safety and service level - (도시부가로 이단 횡단보도 교통섬 설치 준거에 관한 연구 - 보행자 안전과 서비스수준을 중심으로 -)

  • Shim, Kwan-Bo;Kim, Joong-Hyo;Park, Kyung-Woo;Ha, Dong-Ik
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.12 no.6
    • /
    • pp.97-107
    • /
    • 2013
  • On the Staggered Crosswalks, pedestrians cross the crosswalks two times. This method can reduce the cycle, the vehicle delay and the walking distance by increasing the major direction of green time. The safety of pedestrians is also effective. This study suggests the warrant of the facilities of island width and length etc. by considering the road structure and pedestrians. Also this study suggests the standard of the safety through the accident analysis of Staggered crosswalks and General Crosswalks. In the results, accident rate of the Staggered Crosswalks 18.3(100 million vehicle-km) was lower than the accident rate of the General Crosswalks 28.3(100million vehicle-km). By understanding the start point of crossing of the Staggered Crosswalks, the analysis of the location and types of accident suggests the safety zone(spare space). The setting warrants of Staggered Crosswalks are 4 lane over the road and the 2 meter over sidewalk width of island. The minimum length of the Pedestrian island was doubled compared to the crosswalks width. And the maximum length was set by considering the wait time of the pedestrians.

Analysis of Hydraulic Characteristics According to Operation of Movable Weir (가동보 운영에 따른 수리학적 특성 분석)

  • Seo, Il Won;Park, Sung Won;Kim, Tae-Won
    • 한국방재학회:학술대회논문집
    • /
    • 2011.02a
    • /
    • pp.101-101
    • /
    • 2011
  • 현재 국내에서 시행되고 있는 '4대강 살리기 사업'은 하천에서 발생하는 홍수 및 가뭄재해방지를 위한 다양한 공학적 노력을 시도하고 있다. 특히 안정적인 수위 및 유량확보와 홍수방지를 위한 보(weir)가 4대강 유역에 16개 설치되고 있다. 이러한 보 구간에는 고정보와 가동보가 복합적으로 설치되고 있으며 가동보는 그 형상과 운영방식에 따라 다양한 설계방안이 적용되었다. '4대강 살리기 사업' 중 낙동강 23공구의 강정보 공사 구간에는 원호형태의 측면 형상을 갖는 라이징 섹터게이트(Rising sector gate)가 적용되었다. 라이징 섹터게이트는 구조물의 높이가 낮고 수문의 개폐장치가 수문피어 구조물 내에 설치되어 경관이 우수하며, 구조가 간단하여 비체와 수류의 안정성이 뛰어나기 때문에 4개의 공사구간에 적용되었다. 따라서 본 연구에서는 강정보의 가동보 구간 2문 중 1문을 1/100 축척으로 제작하여 가변경사 개수로에 설치하고, 홍수 빈도별 상류 유량 조건과 하류단 수위조건으로 케이스를 정하여 실험을 수행하였다. 본 실험에서 사용한 개수로 장치는 너비 0.6 m, 높이 0.8 m, 그리고 길이 15.0 m(측정가능 구간, 헤드탱크와 테일게이트 부제외)의 개수로 실험장치이다. 측부는 모두 강화유리로 되어 육안관찰 및 계측 시 용이하게 제작되었으며, 순환식 유량 공급장치를 구축하여 수로의 하부에 설치된 유량탱크로부터 계속적으로 순환하도록 설계되었다. 또한 수로 하단으로부터 상단방향으로 약 33 m 지점에 전동 유압식 Jack screw 2기가 설치되어 경사도를 조절할 수 있도록 제작되었다. 유량조절용 판넬의 제어기판에는 디지털 경사계가 설치되어 있기 때문에 보다 정확한 경사도의 조절이 가능하다. 보 모형의 총연장은 53 cm이며 폭은 45 cm이다. 섹터게이트의 게이트부분은 직경 15 cm로 설계하였다. 문주부분을 포함한 모든 모형은 아크릴로 제작하며 레이저의 주사를 방해하지 않으며 투과율을 최대로 할 수 있도록 고강도의 아크릴을 가장 얇게 하여 중공형태를 채택하였다. 실험조건은 우선 보의 운영방안에 따라 게이트의 4가지 개방도를 설정하였고, 특히 평수위조건에서는 보의 상류부에 퇴적된 퇴적물의 세척을 위한 flushing 운영개방도 포함되어 있다. 홍수시에 대한 유량조건은 2년 빈도에 해당하는 유량을 수문의 비율과 상사법칙에 따라 설정하였으며 하류단 수위조건도 동일한 조건에 대한 값을 채택하여 적용하였다. 유동장의 해석을 위해서는 비접촉식 계측방법인 PIV(Particle Image Velocimetry) 시스템을 채택하여 2차원(x-z 방향) laser sheet를 생성하고 주입된 particle에서 반사된 변위(displacement) 정보를 상호상관(cross-correlation)기법으로 유동장을 계산하였다. 또한 수리모형과 동일한 지형격자를 구축하여 3차원 CFD 프로그램인 FLOW-3D로 계산하여 결과를 비교하였다. 특히 flushing 운영방안에 대한 게이트부의 개방도를 세가지(30, 45, $60^{\circ}$)로 구분하여 모의하였고, 적절한 개방도를 제안하고자 하였다. 실험결과는 우선 4가지 운영방안에 대한 가동보 주변에서의 유속장을 파악하였고, 최대유속의 발생위치의 변화를 확인할 수 있었다. 그리고 이에 따른 보의 바닥에서 최대유속이 발생할 경우, 하상보호공 위치와 거리 등에 대해서 분석하였다. 이를 통해 가동보 운영에 따른 다양한 유속구조를 파악할 수 있게 되며 구조적 안정성 확보를 위한 검증자료로 활용될 수 있을 것으로 예상된다. 향후, 가동보 운영방안 중 수세효과(flushing effect)에 대한 효과분석을 위해 게이트부 상류구간에 적절한 입경과 비중의 퇴적물질을 설치하는 연구와 상류부에서의 유입유사농도 및 시간변화에 따른 퇴적에 관한 연구를 수행할 계획이다.

  • PDF

A Study on Evaluation of Exclusive Freight Lane for Reducing Logistic Costs in Expressway (화물비용 절감을 위한 고속도로 화물전용차선의 효과에 관한 연구)

  • 이창수;강경우
    • Proceedings of the KOR-KST Conference
    • /
    • 1998.10b
    • /
    • pp.509-509
    • /
    • 1998
  • 점차 증가하는 도로상에서의 승용차의 비율은 전체 도로교통여건의 악화뿐만이 아니라 국가경제에 있어서도 물류비용의 증가를 가져와 국제경쟁력에서의 약화 및 수출조건의 악화의 원인이 되고 있다. 이러한 물류비용의 감소를 위하여 고속도로에 있어서의 화물전용차선의 설치가 논의되고 있으나 화물전용차선의 설치에 따른 사회 각 분야의 경제적 이익과 불이익을 정확히 산출하여 새로운 교통시설 공급의 효과를 정확하게 파악하지 못한 채로 정책적인 대안의 일환으로 논의되고 있으며, 기존의 고속도로의 교통혼잡비용의 연구에 있어서도 화물통행의 시간가치를 화물차의 운전자의 시간가치로 분석하여 개별 화물통행의 시간가치를 간과하여 분석하고 있는 실정이다. 본 연구는 이러한 배경하에 화물통행의 시간적 가치를 측정하는 방안을 정립하고 고속도로에 있어서의 화물전용차선의 설치가 기존의 교통체계에 미치는 효과를 정확히 분석하고 시설공급에 따른 경제적 편익을 체계적으로 분석하여 이에 따른 화물전용차선 설치의 평가기준을 마련하는데 그 목적이 있다. 본 연구를 통하여 나타난 결과는 다음과 같다. -첫째, 연구대상구간 전체를 기준으로 볼때에 모든 대안에서 화물전용차선의 설치시는 화물전용차선의 미설치시보다 오히려 사회전체의 편익이 감소하는 것으로 나타났다. -둘째, 구간별로 구분하여 분석하였을 경우에는 대안3의 경우 일부구간에서 화물전용차선에 설치에 따른 편익이 발생하는 것으로 분석되었는 바, 상행선의 경우 17:00∼21:00시에 신갈∼오산구간에서 실시하는 것이 가장 높은 편익을 발생하며, 하행선의 경우 06:00∼10:00시에 신갈∼오산구간에서 실시하는 것이 가장 편익이 높게 분석되었다. -셋째, 화물의 통행가치의 증가 및 화물교통량의 증가를 예상하여 5%, 10%, 20%의 증가에 대한 민감도 분석을 실시한 결과 대안1의 경우 교통량의 변화 및 화물통행의 시간가치의 증가시 사회적 편익이 오히려 감소하였고, 대안2와 3의 경우 사회적 편익이 증가하는 것을 알 수 있었다. 이는 경부고속도로의 화물차량의 구성비에 따라 대안 1의 경우 오히려 화물차의 통행시간이 증가함에 그 원인이 있다 할 것이다. 이상과 같은 결론을 통하여 경부고속도로상의 화물전용차선의 설치시는 수답렬 교통량의 구성비와 구간 평균교통량에 의하여 그 효과가 다르게 나타남을 알 수 있었다. 따라서 물류비용 절감차원에서의 화물전용차선의 설치는 본 연구에서 나타낸 방법과 같이 수단간의 경제적 편익을 고려한 구간별 시간대별 효과분석을 통하여 정책의 시행여부가 결정되어야 할 것이다. 한편, 화물전용차선의 설치로 인한 물류비용의 절감을 보다 효과적으로 달성하기 위해서는 종합류류 전산망의 시급한 구축과 함께 화물차의 적재율을 높이고 공차율을 낮출 수 있는 운송체계의 수립이 필요한 것으로 판단된다. 그라나 이러한 화물전용차선의 효과는 단기적인 치유책일 수밖에 없기 때문에 물류유통 시설의 확충을 위한 사회간접자본의 구축을 서둘러 시행하여야 할 것이다.

  • PDF

Study on the investigation of river disturbance in Korea (하천교란의 실태조사 연구)

  • Jang, Chang-Lae;Kim, Joon-Tae;Lee, Kwang-Man
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2007.05a
    • /
    • pp.946-950
    • /
    • 2007
  • 본 연구에서는 우리나라 하천의 교란에 영향을 미치는 인위적인 교란의 원인이 되는 하천정비현황, 수리구조물의 설치, 댐의 건설현황, 골재채취 현황 등에 대하여 실태조사를 하여 분석하였다. 국가하천은 하천연장 $3,260.75km^2$, 개수율 94.81%이며, 지방1급 하천은 하천연장 $1,178.87km^2$, 개수율 95.76%이다. 또한 지방2급 하천은 하천연장 $25,795.85km^2$, 개수율 57.31%로 나타내었다. 국내 보의 현황은 전국적으로 14,364개소가 하천에 설치되어 있으며, 2.1km마다 1개의 보가 설치되어 있다. 시도별로 강원도가 가장 많은 3,463개소로 1.1km마다 보가 설치되어 있으며 다음으로 충북(1.2km/보), 전남(1.9km/보) 순으로 나타났다. 국내의 댐은 약 18,000개소로서 대댐 기준인 댐 높이 15m 이상, 저수량 300만 $m^3$ 이상의 댐은 1,215개소이며, 다목적댐 15개소, 발전댐 21개소, 홍수조절용댐이 1개소가 축조되어 있으며, 댐의 개소수로는 농업용댐이 가장 많이 건설되었다. 유역별로는 낙동강 수계가 가장 많이 건설되었으며, 한강, 금강 수계 순이다. 또한 다목적댐은 낙동강유역에 많이 건설되어 있으며 발전용댐은 한강유역에 가장 많이 건설되었다. 수계별 다목적댐과 발전용댐이 유역에 차지하는 비율로는 한강수계가 83%로 가장 많이 차지하고 있으며, 섬진강, 금강, 낙동강 순이었다. 행정구역별 골재채취 허가량은 경북, 경남, 대구, 부산 순으로 많으며, 특히 낙동강 유역에서 지속적으로 많은 양의 골재채취가 이루어져 왔다. 그 다음으로 금강 수계, 특히 충남에서 많은 골재채취가 이루어졌다. 연도별 골재채취 허가량은 1997년 이후로 지속적으로 감소되고 있다.게 될 것이다. 본 연구에서는 현재 진행중인 승기천 오염하천 정화사업이 종료되는 시점을 기준으로 남동유수지에 대해 승기천과 연계한 유수지의 환경개선 방법을 제안하였다. 준설을 통해 유수지의 근본적인 오염원을 제거하고 남동유수지 유입부에 인공습지와 수처리설비를 설치하여 유수지의 수질을 개선하고 개선된 수질이 3급수로 유지하도록 하였으며, 설치된 인공습지에는 철새도래지를 조성하여 유수지 유입수인 철새가 날아드는 하천인 승기천의 테마와 연계하도록 하였다. 인공습지 주변으로 식생호안을 설치하고 유수지 주변에는 산책로를 설치하여 지역주민들의 친환경 수변공간으로 활용하도록 하였다. 1유수지와 연결된 2유수지는 BTL사업을 통해 주변공단으로부터의 오폐수를 원천적으로 차단하도록 하였으며 2유수지를 매립하여 지하는 강우시 유출수 저류가 가능한 화물차주차장으로 활용하고 지상은 녹지공간으로 조성하여 공단근로자 및 지역주민을 위한 휴식공간으로 활용될 수 있도록 제안하였다. 본 연구는 남동유수지 환경 개선 사업 실행을 위한 정책 연구로 연구결과를 인천시가 적극 수용하기로 결정함에 따라 인천시의 환경 현안 문제인 남동유수지의 수질개선을 통해 시민의 휴식 및 여가선용 공간으로 활용하기 위한 사업의 기초자료로 활용되며 이미 설계검토가 시작되었다. 본 연구결과는 유수지 및 저수지의 환경개선 사업의 선두적인 성공사례로 국내 타 지역의 유사한 사업에 있어 벤치마킹을 할 수 있는 훌륭한 사례가 될 것이다.요 생산이 증가하자 군신의 변별(辨別)과 사치를 이유로 강력하게 규제하여 백자의 확대와 발전에 걸림돌이 되었다. 둘째, 동기(銅器)의 대체품으로 자기를 만들어 충당해야할 강제성 당위성 상실로 인한 자기수요 감소를 초래하였을 것으로 사료된다. 셋째, 경기도 광주에서 백자관요가 운영되었으므로 지방인 상주지역에도 더 이상 백자를 조달받을 필요가 없이,

  • PDF

Investigation of the Effect of Weirs Construction in the Han River on the Characteristics of Sediments (보 설치가 퇴적물 특성에 미치는 영향에 관한 연구)

  • Kang, Min Kyoung;Choi, In Young;Park, Ji Hyoung;Choi, Jung Hyun
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.34 no.9
    • /
    • pp.597-603
    • /
    • 2012
  • To investigate the effects of weir construction on sediment characteristics of river bed, we conducted sediments sampling on the 9 locations near the weir, Kangchun, Yuju and Ipo in Namhan-River. Physical and chemical characteristics of sediments were analyzed by measuring particle size distribution, water content, Ignition loss, COD (Chemical Oxyzen Demand), TOC (Total Organic Carbon), TP (Total Phosphorus), SRP (Soluble Reactive Phosphorus) and TN (Total Nitrogen). Particle classification of all three weir sediments showed sandy loam that was caused by the river bed dredging. Due to the presence of weir, Ignition loss, COD, TOC, TP, SRP and TN showed similar trend such as the concentrations of upward weir had higher than those of downward weir. For the case of SRP concentration and C/N ratio, however, there is not much difference in the sediment characteristics compared to the those of sediments before weir construction. Therefore, It can be predicted that there are little effects of weir construction on sediment characteristics. However, weir construction could influence water quality of the river by controlling the transport and the accumulation of suspended materials from rainfall. Therefore, more intensive monitoring is required to examine the magnitude and patterns of sediment accumulation which could influence overlying water quality.

Ultrasonic Nondestructive On-Site Evaluation of Decks in-Service (초음파 비파괴시험법을 이용한 데크재의 현장평가)

  • Oh, Sei-Chang
    • Journal of the Korean Wood Science and Technology
    • /
    • v.43 no.4
    • /
    • pp.486-493
    • /
    • 2015
  • The ultrasonic nondestructive test (NDT) was applied to deck in-service to inspect and evaluate the performance of decking materials using ultrasonic pulse velocity. First, the measuring method between direct and indirect method according to transducer arrangement was studied. Second, the ultrasonic pulse velocity of decks in-service was compared with the passage of time. Finally, the change of ultrasonic pulse velocity was evaluated to expect service life of decking materials. The results of comparison between direct and indirect method was statistically insignificant and the ratio of direct to indirect method was 1.02. 1.05 respectively. The ultrasonic pulse velocity of decks in-service was decreased as the passage of time and the linear relationship in the ultrasonic pulse velocity to passage of time was found. From the results, The ultrasonic NDT will be helpful as an efficient method of on-site management of decks in-service.

Methodology for Evaluating Freeway Interchange Spacing for High Design Speed based on Traffic Safety: Focused on Analysis of Acceleration Noise using Microscopic Traffic Simulations (초고속 주행환경에서 교통안전을 고려한 고속도로 진출입시설 설치간격 평가 방법론: 시뮬레이션을 이용한 가속소음 분석을 중심으로)

  • O, Dong-Uk;O, Cheol;Jang, Myeong-Sun
    • Journal of Korean Society of Transportation
    • /
    • v.27 no.5
    • /
    • pp.145-153
    • /
    • 2009
  • Although an interest in higher design speeds continues to increase to promote more efficient travel on expressways, the current Korean design guidelines do not provide criteria for design values. An arising issue associated with higher design speeds is how to effectively ensure traffic safety under such high speed traffic conditions. In particular the safety issue would become more significant in determining the interchange spacing. This study proposes a methodology for determining freeway interchange spacing under higher speed traffic conditions. A microscopic traffic simulator, VISSIM, was used to evaluate the effects of various interchange spacings on traffic conditions in terms of safety. In this study, the acceleration noise was used as an index to represent the stability of traffic conditions, which is a potential indicator to quantify the level of safety. It was found based on simulation evaluations that 5-km interchange spacing would be a feasible alternative under higher speed traffic conditions (around 160 km/h).