• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.705-706
• /
• 2006

Generally Short Circuit Test of transformers are tested according to IEEE std C57.12.00-2000, IEC 60076-5(2000-07), ES148(1998.6.26) or KS C4309(2003). But ES148(1998.6.26) is same as IEEE std C57. 12.00-2000 and KS C4309(2003) is revising coincidence with IEC 60076-5(2000-07). On this study condition of the transformers before short circuit test, calculation method for test current peak value, tolerance on the asymmetrical peak and r.m.s value, short circuit testing procedure, number of short circuit test, duration short circuit test, and detection of faults and evaluation of short circuit test result will be compared with ANSI and IEC.

• Membrane Journal
• /
• v.26 no.2
• /
• pp.152-158
• /
• 2016

The Chlor-alkali (CA) membrane cell is a major electrolysis system to produce valued chemicals such as chlorine gas and sodium hydroxide. The CA membrane process has been attracted in the industries, since it has relatively low energy consumption when compared with other CA processes. The key component in CA process is perfluorinated sulfonic acid ionomer membranes, which provide ion-selectivity and barrier properties to produced gases. Unfortunately, there is limited information to determine which factors should be satisfied for CA applications. In this study, the influences of PFSA membranes on CA performances are disclosed. They include ion transport behaviors, gas evolution capability, and chemical/electrochemical resistances under CA operation conditions.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.12
• /
• pp.753-764
• /
• 2015

Among several types of energy saving smart window technologies, the leader, the dynamic EC (electrochromic) window one needs integrated PV (photovoltaics), to minimize expensive electrical wiring as well as to obviate the need for external energy. Self-powered smart windows were reviewed according to PV types used. DSSCs (dye sensitized solar cells) were found to be compatible with EC cells, to have several categories of next generation smart windows such as PECCs (photoelectrochromic cells), PVCCs (photovoltachromic cells), EC polymer PECCs. In addition silicon solar cells and third generation solar cells were investigated. They are summarized in a table showing their advantages and disadvantages respectively for a fast comparison. The strategy to expedite the commercialization of these next generation smart windows includes developing retrofit smart window coverings for use on flexible polymer substrates adhered to the inside surface of a window and easily replaced after use for upto 10 years.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1082-1084
• /
• 1998

In this paper, we developed a diagnosis device for ZnO arrester to detect on-line leakage current and acquire data from the power distribution system. The arrester is important power equipment used in power transmission and distribution systems to protect the generator and the main transformer from surge and overvoltage. First of all we developed a diagnosis device for ZnO arrester leakage current. And then we detect the total leakage current by the developed device without disconnecting the arrester ground wire and analysis the 3rd order harmonic by Fast Fourier Transform(FFT) to diagnose the ZnO arrester deterioration. With measuring the total current and the resistive current of power distribution system in operation, we analysis the trend of resistive current component in the total leakage current. We expect the result will be promote the method to protect electrical utility and customer from accident.

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.181-187
• /
• 2003

In high speed packet switching network, packet service by priority scheme prefer to QoS. Efficient packet service according to the priority scheme in high speed packet switch is a key point. Therefore development of priority service algorithm in the packet switch is very important. In this paper, we proposed W-iSLIP algorithm that service time take queue length into consideration and compared the proposed W-iSLIP algorithm to other previous proposed algorithm through simulation. Simulation results show 2.6% performance elevation in average delay, and 34.6% performance elevation in priority service.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.3
• /
• pp.184-189
• /
• 1999

In this paper, we develope a diagnosis device for ZnO arrester by detecting the leakage current in service. To diagnose the deterioration of ZnO arrester, the device detects the total leakage current which flows between an arrester and ground, and analyzes the resistive current(third harmonic current) which is an indicator of deterioration of ZnO arrester. We use the optical cable which can transfer a detected data without a noise, also use a microprocessor for a data storage, processing, and trend analysis. Experiment are executed to verify its performance in laboratory and the results show that the diagnosis device exactly detects the total leakage current and the resistive current, so it can diagnose the deterioration of ZnO arrester. Also the leakage current of ZnO arrester is detected using the developed diagnostic device in field, these results are presented.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.127-133
• /
• 1999

Ths paper deals with the active and reactive power control of Battery Energy Storage System (BESS) during its interconnection operation to power distribution system When an interconnection operation of BESS to power distribution system, it is well suited for peak load shaving and distribution voltage compensation by controlling the real and reactive power. Equivalent mxiel of the distribution system and the BESS is derived and power flow equations are presented to control the real and reactive power of BESS. In this paper, to control the active and reactive power of BESS, $P-\delta$ and Q-V control method and ntJIrerical description is presented. To verify the proposed control method, using PSCAD/EMTDC program simulates the active and reactive power control of BESS.f BESS.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1028-1030
• /
• 2004

최근 세계시장이 Al-Casting 외함(알루미늄 주물탱크)을 적용한 GCB(Gas Circuit Breaker) 및 GIS(Gas Insulated Switchgear)를 선호하고 있으며, 이는 철재 외함에 비해 많은 이점을 갖고 있기 때문이다. 알루미늄 외함은 철재 용접형 제품에 비해 중량이 가벼워 취급 및 운반이 용이할 뿐 아니라 장기 사용 시에도 발청의 우려가 없으며, 2층 이상의 건물에 신설 또는 증설시 건물의 중량 제한에 따른 제약 조건에서 훨씬 자유롭다. 또한 Casting은 Welding형에 비해 분기부 전계 강도가 유리하고, 알루미늄은 철에 비해 열발생량이 적어 외함크기 축소가 가능하다. 또한 제작공정이 철재 용접외함에 비해 단순하고 대량생산에 유리하다. 이로 인해 외함이 표준화되고 GIS 모듈화가 완성되면 기종별 Series화하여 대량생산 체제 구축에 유리하게 된다. 점진적인 인건비 상승으로 용접형 외함의 단가상승이 예상되며, GCB의 경우 Al Casting형이 원가면에서도 유리하다. 이에 당사 GCB 및 GIS 제품 경쟁력 향상 및 수출시장 적극공략을 목적으로 현행 GCB 및 GIS 철재 용접형외함을 알루미늄 Casting 외함으로의 변경, 개발을 실시하였다. 본 연구에서는 Al Casting 외함을 개발하기 위한 일련의 과정에 대해 소개한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.4
• /
• pp.136-145
• /
• 1998

This paper describes the FFT and coefficient analysis of vibration signals for preventive diagnosis of a mold transformer at normal and abnormal state. Varying applied voltage, loading current and temperature as control variables for he experiment, measurement variables such as magnitude of vibration signals, frequency spectrum and time series coefficient were analyzed. The vibration signals by variation of control variables were measured by acceleration sensor adhered on the surface of winding and core, and measurement variables were calculated using dat acquisition system. After analyzing the normal state, the structural distortion was also simulated. The vibration signals at abnormal state were measured by the same control variables variation as the normal state. As a result, vibration signals between normal and abnormal state could be distinguished by comparison of the perpendicular and horizontal vibration signal.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1330-1332
• /
• 2005

최근 세계시장이 Al-Casting 외함(알루미늄 주물탱크)을 적용한 GCB(Gas Circuit Breaker) 및 GIS(Gas Insulated Switchgear)를 선호하고 있으며, 이는 철재 외함에 비해 많은 이점을 갖고 있기 때문이다. 알루미늄 외함은 철재 용접형 제품에 비해 중량이 가벼워 취급 및 운반이 용이할 뿐 아니라 장기 사용 시에도 발청의 우려가 없으며, 2층 이상의 건물에 신설 또는 증설시 건물의 중량 제한에 따른 제약 조건에서 훨씬 자유롭다. 또한 Casting은 Welding형에 비해 분기부 전계 강도가 유리하고, 알루미늄은 철에 비해 열발생량이 적어 외함크기 축소가 가능하다. 또한 제작공정이 철재 용접외함에 비해 단순하고 대량생산에 유리하다. 이로 인해 외함이 표준화되고 GIS 모듈화가 완성되면 기종별 Series화하여 대량생산 체제 구축에 유리하게 된다. 점진적인 인건비 상승으로 용접형 외함의 단가상승이 예상되며, GCB의 경우 Al Casting형이 원가면에서도 유리하다. 이에 당사 GCB 및 GIS 제품 경쟁력 향상 및 수출시장 적극공략을 목적으로 현행 GCB 및 GIS 철재 용접형외함을 알루미늄 Casting 외함으로의 변경, 개발을 실시하였다. 본 연구에서는 Al Casting 외함을 개발하기 위한 일련의 과정에 대해 소개한다.