Abstract
This paper describes the FFT and coefficient analysis of vibration signals for preventive diagnosis of a mold transformer at normal and abnormal state. Varying applied voltage, loading current and temperature as control variables for he experiment, measurement variables such as magnitude of vibration signals, frequency spectrum and time series coefficient were analyzed. The vibration signals by variation of control variables were measured by acceleration sensor adhered on the surface of winding and core, and measurement variables were calculated using dat acquisition system. After analyzing the normal state, the structural distortion was also simulated. The vibration signals at abnormal state were measured by the same control variables variation as the normal state. As a result, vibration signals between normal and abnormal state could be distinguished by comparison of the perpendicular and horizontal vibration signal.
본 논문에서는 몰드변압기 예방진단을 위해 정상상태와 비정상상태 몰드변압기의 진동신호의 FFT 및 시계열 분석에 관해 연구하였다. 실험올 위한 제어변수들로 공급전압, 부하전류 및 주위온도를 변화시키면서, 진동신호 크기, 주파수 스펙트럼 및 시계열 계수와 같은 측정변수들을 분석하였다. 제어변수 변화에 의한 진동선호는 권선표변과 철섬에 부착된 가속도센서로 측정되었으며, 이 신호들은 중폭기를 거쳐 데이터 수집장치에서 측정변수들로 계산되었다. 또한, 정 상상태 분석 후, 몰드변압기의 구조적 변형올 모의하였다. 비정상상태 진동신호는 정상상태와 같은 제어변수 변화 에 의해 측정되었다. 연구 결과, 정상상태와 비정상상태 진동신호는 수직진동신호와 수평진동신호를 비교하여 분석함으혹써 구별이 가능하였다.