• The Korean Journal of Applied Statistics
• /
• v.29 no.7
• /
• pp.1155-1163
• /
• 2016

This paper deals with an estimation procedure of variance components in a mixed effects model by projections. Projections are used to obtain sums of squares instead of using reductions in sums of squares due to fitting both the assumed model and sub-models in the fitting constants method. A projection matrix can be obtained for the residual model at each step by a stepwise procedure to test the hypotheses. A weighted least squares method is used for the estimation of fixed effects. Satterthwaite's approximation is done for the confidence intervals for variance components.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1543-1549
• /
• 2012

This study focuses on the state space model and the design of a state observer for the slip dynamics between rolls in STS cold cluster mills. First, a mathematical model of the roll slip is given as a nonlinear differential equation. Then, by using a Taylor series expansion, it is linearized as a state space model. Next, by using Gopinath's algorithm, a minimal-order state observer based on the state space model is designed to estimate the angular speed of all idle rolls except for an actuated roll that is measureable. Finally, a computer simulation is used to validate that the proposed state space model very well describes slip dynamics between, and moreover, the state observer very well estimates the angular speed of the idle roll.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.1
• /
• pp.123-132
• /
• 1999

One of the major difficulties in the seismic analysis of a dam-reservoir system is the treatment of the energy radiation in the upstream direction of the reservoir. In the paper, a new transmitting boundary is presented that can model properly the radiation of energy in the far field direction of a semi-infinite reservoir with constant depth. In the newly developed method, effects of surface wave motion are taken into accounted and the reservoir-foundation interaction is approximately accounted for with an absorbing boundary condition. If a dam has vertical upstream face and the infinitely long reservoir maintains constant depth, then the proposed transmitting boundary can be directly coupled with the model of dam body. In present study, the dam body is assumed to behave elastically and modeled by finite element method. Seismic responses of a dam model are investigated using the newly developed transmitting boundary.

• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.613-622
• /
• 2003

The multi-configurative microscopic system for inspecting the wire-bonding of reed frame is designed. Rays refracted by objective lens group which is composed of common lens group of x2 and x6 are splitted by beam-splitter, and Rays through the central region and the boundary region of the object imaged at x2 and x6 through imaging lens groups, respectively. The depth of wire structure on the reed frame has about $\pm$3 mm, in order to observe by uniform magnification without the dependency on the variation of objective distance generated by the depth of wire structure on the reed frame, imaging lens groups should be moved on nonlinear locus like mechanically compensated zoom lenses. The nonlinear equations for zoom locus are derived by using the Gaussian bracket. Refraction powers and positions of each groups are numerically determined by solving the equations, and initial design data for each groups is obtained by using Seidel third order aberration theory. The optimization technique is finally utilized to obtain this microscopic system.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.3
• /
• pp.12-18
• /
• 1970

In this paper, the radiation characteristics of a Circular Loop Antenna is studied in a moving homogeneous, isotropic and linear media with a constant velocity much less than the speed of light. In Stuffing the radiation characteristics, Srst vector potential on the loop antenna is derived in the moving media by appling Maxwell-Minkowaski's theory. Next, using the derived relations, the electric and magnetic Seld is calculated for the spec-i Sed wave length ana velocity of the media. The Seld patterns in the moving media are compared with those of stationary media. We find that the intensity of the field is reduced in the direction of the media velocity and increased in the opposite direction only for the component parallel with the plane of the antenna. The deviation from the stationary media is proportional to the velocity of the media and the frequency of source current.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.117-124
• /
• 1992

Waves around a practical hull form and a series 60 model are computed by rectangular variable spacing and staggered flesh systems based on MAC(Marker and Cell) method. As a governing equation, the Euler equation is adopted. The comparison indicates that the computed waves are in good agreement with the measured results and that the MAC method is useful. On the other hand, a critical condition for the appearance of sub-breaking waves derived from the in viscid instability analysis is applied to the calculated flow field around a blunt bow. It is confirmed that the derived condition detects well the appearance of sub-breaking waves.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.1
• /
• pp.11-23
• /
• 1989

A computer code has been developed to simulate three-dimensional viscous flows over a ship-stern. Semi-elliptic forms of Reynolds equations are adopted and numerically generated body-fitted coordinate systems are used to resolve complex geometries of the ship-hull. A standard form of $k-\varepsilon$ turbulence model is adopted for evaluation of the Reynolds stresses. Turbulent flows on a model with 3:1 elliptic sections and the SSPA-720 container ship model are predicted by using the code. Calculated pressure distributions of hull-surfaces and mean velocity distributions are generally in good agreements with measured values in wind-tunnels. But turbulent kinetic energies tend to be over-estimated near the stern in comparison with measured data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2775-2784
• /
• 2013

A bead is intended to reach a specified target point in the minimum-time when it travels along a certain curve on a vertical plane with the gravity. This is called the brachistochrone problem. Its minimum-time control input may be found using the calculus of variation. However, the accuracy of its minimum-time control input is not high since the solution of the control input is based on a table form of inverse relations for some complicated nonlinear equations. To enhance the accuracy, this paper employs the neural network to represent the inverse relation of the complicated nonlinear equations. The accurate minimum-time control is possible with the interpolation property of the neural network. For various final target points, we have found that the proposed method is superior to the conventional ones through the computer simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.117-126
• /
• 2013

A ship is intended to reach a specified target point in the minimum-time when it travels with a constant speed through a region of strong currents and its heading angle is the control variable. This is called the Zermelo's navigation problem. Its approximate solution for the minimum-time control may be found using the calculus of variation. However, the accuracy of its approximate solution is not high since the solution is based on a table form of inverse relations for some complicated nonlinear equations. To enhance the accuracy, this paper employs the neural network to represent the inverse relation of the complicated nonlinear equations. The accurate minimum-time control is possible with the interpolation property of the neural network. Through the computer simulation study we have found that the proposed method is superior to the conventional ones.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1997.04a
• /
• pp.65-65
• /
• 1997

가입자가 B-ISDN(Broadband Integrated Services Digital Network) 서비스에 대한 shb은 수준의 품질 및 안정적인 서비스 제공을 요구함에 따라, 이러한 서비스를 제공하기 위한 ATM (Asynchronous Transfer Mode) 교환기에 대한 신뢰성 설계의 중요성은 증가하 고 있다. 교환기의 중요한 신뢰성 성능 척도 중의 하나인 연결 절단율 (Cutoff connection rate)은 총 연결시간 동안 절단된 연결수로 정의되며, 연결 절단은 호 설정 (Call setup) 단 계를 지나 서비스 중인 연결이 사용자의 요구가 아닌 시스템의 고장으로 종료될 때 발생한 다. 연결 절단율 추정 문제는 기존의 신뢰도 또는 가용도 예측을 위한 시뮬레이션과는 달리 시스템 구성 유니트들의 고장율, 수리율, 그리고 요구된 연결의 트래픽 특성 부분이 혼합된 문제이다. 따라서, B-ISDN 서비스의 중요한 특징인 다양한 트래픽 특성과 시스템의 구성 (Configuration)을 고려하여 연결 절단율을 해석적인 방법을 통하여 추정하는 데네는 어려 움이 있으며 시뮬레이션에 의한 방법이 적절하다. 본 고에서는 B-ISDN 서비스의 트래픽 특 성과 ATM 교환기의 시스템 구성 및 신뢰도 데이터로부터 시스템의 연결 절단율을 추정하 기 위한 시뮬레이터의 기능 및 구조, 시뮬레이션 수행 결과 등을 제시한다. 시뮬레이터는 AweSim 시뮬레이션과 CUser Written Code를 사용하여 개발하였다. 시뮬레이터의 구성 모듈은 크게 호 도착 모듈, 연결 제어 및 자원 할당 모듈, 유니트 고장 및 수리 모듈, 통계 량 수집 모듈 등으로 구성된다. 개발된 시뮬레이터는 B-ISDN 트래픽 파라메터와 연결 절단 율의 상호 관계 규명 및 시스템 설계 대안 (Design alternatives)에 대한 비교/평가에 활용 된다., 수중생물의 경우는 특히 수온, 수량 영양원등이다.(중략). 본 연구의 접근방법으로는 ASRS의 개념적인 Reference Model을 수립하고 이 Reference Model에 대한 Formal Model로 DEVS(Discrete Event System Specification)을 이용하여 시스템을 Modeling하였다. 이의 Computer Simulation을 위하여 DEVS형식론 환경에서의 Simulation Language인 DEVSim ++ⓒ를 이용하여 시스템을 구현하였다.. 실형 결과로는 먼저 선형 상미분방정식의 예로 mass-damper-spring system, 비선형 상미분방정식의 예로는 van der Pol 방정식, 연립 상미분방정식의 예로는 mixing tank problem 등을 보였으며, 그의 공학에서 일어나는 여러 가지 문제들도 다루었다.화물에 대한 방어력이 증가되어 나타난 결과로 여겨지며, 또한 혈청중의 ALT, ALP 및 LDH활성을 유의성있게 감소시키므로서 감잎 phenolic compounds가 에탄올에 의한 간세포 손상에 대한 해독 및 보호작용이 있는 것으로 사료된다.반적으로 홍삼 제조시 내공의 발생은 제조공정에서 나타나는 경우가 많으며, 내백의 경우는 홍삼으로 가공되면서 발생하는 경우가 있고, 인삼이 성장될 때 부분적인 영양상태의 불충분이나 기후 등에 따른 영향을 받을 수 있기 때문에 앞으로 이에 대한 많은 연구가 이루어져야할 것으로 판단된다.태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elements)로 가정한다. 즉, [+wh] 의미의 겹의문사는 동일한 구성요 소를 지닌 병렬적 합성어([$[W1]_{XO-}$ $[W1]_{XO}$ ]$_{XO}$