• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.649-657
• /
• 2019

An essential part of the development of an autonomous ship is supporting technology that can effectively check and diagnose the operational status of the ship form the shore control center on land. This development has recently occurred in the shipbuilding and shipping industries. In this paper, we present a smart ship solution that operates, as a single system, a data collection platform that gathers ship operation data and a service platform that provides various services. When this smart ship solution was applied to an operating ship, it was determined that a variety of high-quality data could be collected compared to existing ship data collection systems. In addition, it was shown that of the operation data collected, analysis of parameters related to the main engine can be used to determine the overall state by deriving valid results and visualizing patterns. In conclusion, it was suggested that a ship's operation status could be checked more effectively and a comprehensive evaluation could be possible at the shore control center if the results of this study were extended to various ship equipment and analyzed together with the operational environment data.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2013.12a
• /
• pp.55-59
• /
• 2013

Transverse vibrations of ship's aft end and deckhouse among the various modes of hull structures are induced mainly by transverse exciting forces and moments of main engine such as ${\times}$ and h-moment. Avoidance of resonance should be made in a intial design stage in case there is a prediction for resonance between main engine and transverse modes of deckhouse. This study shows a case of change in type of main engine from 12 cylinders to 10 without modification of hull structures in engine room requested by a shipowner of 8,600 TEU class container carrier and proposes a guide to the effective ways of structural arrangement for avoiding resonance between transverse exciting force and surrounding structures of main engine in engine room through case studies.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.894-900
• /
• 1998

In this paper, a communication method is proposed for the development of a main engine remote control system. The main engine control system compriese three subsystems such as RCS (Remote Control System) BCS (Bridge Control System) and SS (Safety System), Thus it is required to exchange data each other among these subsystems. The communication method has simplified hardware through the minimization of communication components where the interrupt method are employed for receiving and the polling method for transmitting. We discuss a methodology of using a ring buffer for data storage physically which has two buffers virtually for the effective use of memory. This communication method presents a good performance in the system which has rather small numbers of communication data.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.743-748
• /
• 2016

Ship's diesel engines have intrinsic problem to make vibrations caused by cylinder explosion and unbalanced rotating mass. These vibrations might induce noises, are transferred to hull and neighboring structures and cause secondary vibrations. This paper suggests the use of an additional dynamic absorber with a sub-vibration system to reduce the aforementioned vibrations. This dynamic absorber is designed based on an analysis of the free vibration of the engine shafting system and the forced vibrations.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.4
• /
• pp.264-272
• /
• 2011

Shipbuilders carry out the operation test to check the conditions of the main propulsion system and auxiliaries for moored vessel in the quoy before the sea trial. The estimation of the thrust and torque for the partially submerged propeller should be prepared to ensure the safety of mooring line and the ship. In this paper, the variations of the thrust and torque according to the shaft submergence and the propeller rotating speed in bollard pull condition are investigated with the model test and the numerical analysis. Based on these resaearch, the empirical formula representing the physical phenomena of the partially submerged propeller is derived and validated through comparison to measurement results of full-scale propellers under the quoy operation test.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.135-140
• /
• 2022

Most machines are made of several types of . In particular, the shaft system of the ship consists of the brass of the propeller blade and the stainless steel of the shaft. When dissimilar the electrolyte solution of seawater, a voltaic cell and a shaft electromotive force is generated. This electromotive force causes electrical corrosion of the bearing and shaft supporting the shaft system. prevent this corrosion, a shaft grounding system is installed in ships. As for the experimental method, various information acquired by designing a program to periodically measure the electromotive force of the controllable pitchpropeller) system using an A/D converter of NI. This study analyzed the generation and characteristics of accumulator electromotive force for CPP and considered the installation location of the grounding system to remove the accumulator electromotive force.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.2
• /
• pp.151-156
• /
• 2009

This experimental study investigated in to the flow characteristics around staggered cooling tube arrays of fan coil unit for ship. A particle image velocimetry technique was employed to obtain detailed measurements at inlet-velocity-based Reynolds numbers of $Re=1.5{\times}10^3{\sim}Re=2.5{\times}10^3$. As for the results, the flow evolves rapidly and becomes spatially periodic in the streamwise direction after a relatively short distance. The flow exhibits strong Reynolds number dependence in developing region but no significant Reynolds number effects are observed in spatially periodic region.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.6
• /
• pp.611-616
• /
• 2013

Many researches have been carried out consistently for the green ship owing to its economic increasement, efficiency and convenience. One of them is an electronic controlled marine diesel engine. However, we are suffered from dissemination of above engine, due to its anxiety about safety and reliability. In order to solve these problems in this study, emission characteristics test of main propulsive two-stroke diesel engine, equipped both electronic control and cam drive fuel injection systems, has been performed and evaluated under the various load conditions. From the test results, we have confirmed that exhaust gas emission characteristics of the electronic control system is similar to the cam drive system in eco-mode operation, but NOx in emission mode has been decreased 100ppm or more in full load condition. HC emission from the electronic control system is decreased 10~20ppm at 50% load, and 35~40ppm at 25% load in comparison to cam drive system. In fuel consumption, it is considered that 7g/kWh is decreased than the value of cam drive system at 700bar of injection pressure, which is 200bar higher than cam drive system.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.4
• /
• pp.105-113
• /
• 1995

A mechanical actuator to generate adjustable force ants its active control algorithm to minimize ship structural vibration are developed. The algorithms comprise initial algorithm which determines optimal phase and force magnitude of the actuator using the variation of vibration response according to the phase difference between the main engine and the actuator, and regulating algorithm which performs continuous optimal control to track the change of the engine speed. This control system can be applied without any prior identification for the dynamic characteristics of the controlled structure. In the control experiments for the deckhouse structural vibration of a 300,000 DWT crude oil carrier and a 2,270 TEU container carrier, the developed system showed good performance to reduce the vibration levels to $1/2{\sim}1/6$ of the uncontrolled levels.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.135-140
• /
• 2010

Vibration on the ship was generated mainly by main engine and propeller. The vibration which is generated from the ship has an effect on durability of ship's machinery and it also has an evil influence on the working conditions for crew. In this research, vibration measurement system to measure ship's vibration was built and vibration signals using acceleration sensors were measured from an accomodation space of training ship. An evaluation of vibration with regard to habitability was also discussed and the evaluation process followed the guidelines ISO6954:2000E.