• Journal of Navigation and Port Research
• /
• v.29 no.10 s.106
• /
• pp.847-852
• /
• 2005

In order to evaluate the safety of navigation at sea and the safety of mooring on berthing, it is necessary that the wave and wind induced ship dynamic motion should be measured in real time domain for the validity of theoretical evaluation method such as sea-keeping performance and safety of mooring. In this paper, the basic design of sensors is discussed and some system configurations were shown. The developed system mainly consists of 4 kinds of sensors such as three-dimensional accelerator, two-dimensional tilt sensor, azimuth sensor and two displacement sensors. Using this measuring system, it can be obtained the 6 degrees of freedom of ship dynamic motions at sea and on berthing such as rolling, pitching, yawing, swaying, heaving, surging under the certain external forces.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.69-74
• /
• 2005

In order to evaluate the safety of navigation at sea and the safety of mooring on berthing, it is necessary that the wave and wind induced ship dynamic motion should be measured in real time domain for the validity of theoretical evaluation method sum as sea-keeping performance and safety of mooring. In this paper, the basic design of sensors is discussed and some system configurations were shown. The developed system mainly consists of 4 kind of sensors sum as three dimensional accelerator, two dimensional tilt sensor, two displacement sensors and azimuth sensor. Using this measuring system(MMS), it can be obtained the 6 degrees of freedom of ship dynamic motions at sea and on berthing sum as rolling, pitching, yawing, swaying, heaving, surging under the certain external forces.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.89-92
• /
• 2002

최근 들어 급증하고 있는 해양 충돌 사고 증가의 원인은 선박을 조종하는 항해사의 잘못된 판단 에 의한 부주의가 대부분이다. 이러한 문제를 해결하기 위한 가장 적극적인 방법은 선박에 자동화 및 지능화를 부여하여 항해사의 실수를 최소화하는 것이다. 대표적인 연구는 선박의 자율운항시스템(autonomous navigation system)이 있는데, 이는 선박운항에 있어 항해계획을 수립하고 현재의 선박의 상태를 파악하여 선박을 적절히 제어하는 항해 전문가시스템이다. 선박 자율운항시스템은 실세계의 선박에 장착되어 실험하여야하나, 선박은 고가의 운송수단이고, 자율운항시스템을 장착하기 위한 하부장치 인터페이스를 설계 및 구현에 많은 시간이 소요되므로 실제 선박을 모방하는 선박시뮬레이터를 이용하는 방법이 타당하다. 선박시뮬레이터는 선박의 물리적 운항특성을 모방하는 선박운동시뮬레이터와 선박 운항 주변에 변화하는 장애물을 시뮬레이터 하는 주변 객체시뮬레이터로 구성된다. 본 연구에서는 선박 운항 주변에 등장하는 장애물 변화를 시뮬레이션하고, 이에 기반한 ARPA RADAR를 모의 가동하는 주변객체시뮬레이터를 개발한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.181-186
• /
• 2005

A ship runs with various modes of motion due to waves. Among the modes, roll mainly influences on the safety of cargos on the deck of container ship. In order to protect cargo shifting and turning, securing and lashing system are generally installed. In that case, it is necessary that the force and moment at the connection point of containers should be estimated. Therefore we derived mathematical equations to calculate the forces of securing points and lashing wires. Also we calculated those forces and moments about various lashing patterns.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.377-382
• /
• 2005

A ship runs with various modes of motion due to waves. Among the modes, roll mainly influences on the safety of cargos on the deck of container ship. In order to protect cargo shifting and turning, securing and lashing system are generally installed. In that case, it is necessary that the force and moment at the connection point of containers should be estimated. Therefore we derived mathematical equations to calculate the forces of securing points and lashing wires. Also we calculated those forces and moments about various lashing patterns.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.832-838
• /
• 2021

Recently, reports of marine accidents of small fishing vessels less than 10 tons have been increasing. In this study, the characteristics of the motion response in regular waves were analyzed using computations for these ships. Small vessels less than 10 tons are classified by size and used for marine accident investigations. Therefore, the motion response analysis was performed on three small fishing vessels of different sizes. In the case of the head sea, it was confirmed that as the speed of the vessel increased in the long wavelength region, the motion responses of heave and pitch became large. The motion response of the smallest 3-ton fishing vessel was greater than that of the other sizes of fishing vessels. The maximum value of the roll motion shifted to the long wavelength region as the speed gradually increased in the bow sea, regardless of the size of the ship. In all the three small fishing vessels, it was found that the roll motion was the greatest at 15 knots, the highest speed in both bow and beam seas. When sailing in the head sea and bow sea conditions, lowering the speed is one of the effective approaches to reduce the effects of the vertical and lateral plane motions. The roll motion caused by the beam wave showed a tendency to increase rapidly only at a specific wavelength regardless of the speed and the size of the vessel. It was confirmed that the roll motion was significantly reduced with forward speed in the stern wave compared to the bow wave. As there is a specific region where the maximum value of the hull motion response appears depending on the size and speed of the ship, an operation method that can minimize the effect of this motion should be considered and implemented.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.683-688
• /
• 2014

The vessel should prevent dragging anchor against the external forces by utilizing the anchor and secure the stability of it. A fundamental understanding on the embedding motion and holding power of the anchor is necessary to perform the safe operating of anchor work. In this study, the embedding motion and holding power of the anchor according to an initial position in an experimental tank of 6m long in sand are tested by using two types of different anchor models(ASS and AC-14), which are generally applied to the commercial vessel nowadays. The anchor flukes seem to rotate and to be embedded into soil up to the maximum depth and maintaining a constant depth in case of the same direction and perpendicular to the towing direction, regardless of the form of an anchor. In case of the opposite direction to the towing direction, it is noted that the coefficient of holding power becomes smaller than the other initial positions.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.37
• /
• pp.59-76
• /
• 2014

부선은 타 선박에 비해 운항조건 등의 특성상 많은 어려움과 위험에 노출된 채 해상운송 업무를 수행하고 있으며, 예부선 해양사고는 일반 선박보다 40%이상 높게 나타나고 있다. 본 연구는 부선의 안전운항에 필요한 정량적이고 객관적인 정보를 제공하기 위해 실무에서 가장 많이 사용되고 있는 선수 형상을 지닌 부선을 대상으로, skeg와 bridle이 부선의 회두운동에 미치는 영향 조사를 위한 수조실험을 통해 부선의 동적 거동에 의한 예인장력의 변동을 측정하고, skeg가 선수 형상이 다른 부선의 침로안정성에 미치는 영향을 분석 검증하여 예부선의 안전예항 방안을 도출하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.71-73
• /
• 2011

다기능 선박조종시뮬레이터(Full-mission Shiphandling Simulator)는 항해사, 선장 및 도선사의 자질 향상을 위한 교육뿐만 아니라 항만개발을 위한 사전 검토와 해난사고 발생 시, 원인규명을 위한 분석에도 이용되고 있다. 한국해양수산연수원에서는 이러한 목적을 위하여 2011년 2월 28일 Russia Transas 제품의 선박조종시뮬레이터를 설치 완료 하였다. 이 FMSS는 적어도 360도의 수평시각을 가진 대형 구형화면에 여섯(6) 자유도 운동을 하는 본선 및 타선을 실시간으로 표현하는 photo-realistic high resolution computer graphic visual system과 같은 최신기술을 사용하는 가장 현대화된 최고급 해상용 시뮬레이터로 해난 사고 윈인규명을 위한 분석 연구 목적을 위하여 광범위한 출처로부터 모델시험과 자료의 신뢰할만한 공식적 기록들에 근거한 매우 정확한 수력학적 선박 모델링 소프트웨어로 이루어졌다. 여기서는 이 FMSS의 형태와 복잡성을 상세하게 소개한다.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.395-405
• /
• 2018

Seakeeping safety module in Korean e-Navigation system is one of the ship remote monitoring services that is employed to ensure the safety of ships by monitoring the ship's real time performance and providing a warning in advance when the abnormal conditions are encountered in seakeeping performance. In general, seakeeping performance has been evaluated by simulating ship motion analysis under specific conditions for its design. However, due to restriction of computation time, it is not realistic to perform simulations to evaluate seakeeping performance under real-time operation conditions. This study aims to introduce a reasonable and faster method to predict a ship's roll motion which is one of the factors used to evaluate a ship's seakeeping performance by using a machine learning-based surrogate model. Through the application of various learning techniques and sampling conditions on training data, it was observed that the difference of roll motion between a given surrogate model and motion analysis was within 1%. Therefore, it can be concluded that this method can be useful to evaluate the seakeeping performance of a ship in real-time operation.