• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.10b
• /
• pp.113-122
• /
• 1996

본 연구는 석탄가스화복합발전(IGCC)의 핵심부분이라 할 수 있는 슬래깅 형태의 분류층 가스화기에 원활한 Slagging을 유지하기 위해 Flux addition method와 Coal blending method를 적용하였다. 대상탄으로는 가스화에 적합하다고 알려진 알라스카탄, 대동탄과 비교탄으로 가스화에 부적합하다고 알려진 1종류의 유연탄을 대상으로 기본분석 및 화학적 조성분석, 용융온도를 측정하여 봄으로써 대상탄들의 슬래깅성향을 평가하였다. 대동탄과 알라스카탄에 대해서는 Flux addition method를 적용하고, 비교탄에 대해서는 Coal blending Method를 적용한 후, 140$0^{\circ}C$로 운전되는 가스화기의 효율을 최대화할 수 있는 Flux 첨가비와 blending ratio를 산정하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.973-980
• /
• 2015

With their wide geographical distribution, unconventional resources are continuously compared against conventional resources, but their development is expanding because TRRs (Technical Recoverable Resources) are similar to conventional resources. In particular, there is active development of unconventional gas resources such as shale gas, tight gas, CBM (coalbed methane) and gas hydrate. However, it is difficult to calculate the material properties of unconventional resources, especially the gas content, with current geophysical logging technology. Additionally, some overseas companies have monopolies on related equipment and materials. Therefore, this study developed a reservoir PCS (Pressure Core Sampler). It can collect core samples without gaseous loss by maintaining high pressure from the moment the core is sampled and record pressure and temperature in real time. Successful performance testing was also carried out for official verification of the manufactured PCS. The reservoir PCS will contribute to the acquisition of geophysical well logging data as well as accurate and reliable cores.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.11a
• /
• pp.25-31
• /
• 2000

전 세계적으로 환경문제에 대한 위기감이 확산되면서 과거에는 국지적인 환경오염문제였던 것이 지구 온실효과, 산성비, 오존층 파괴 등의 형태로 범지구적인 환경오염 문제로서 심각히 대두되고 있다. 지구 환경오염의 주 요인들인 $CO_2$, SOx, NOx의 배출 규제기준은 점점 더 강화되어 기존의 석탄 화력발전기술로는 엄격해지는 환경기준을 만족시키는 데 한계가 있다. 따라서 기존기술을 대체할 수 있는 신 발전기술의 개발이 절실한 실정이다.(중략)

• Journal of Energy Engineering
• /
• v.6 no.1
• /
• pp.104-113
• /
• 1997

This study aims to develop an analysis model using a commercial process simulator-ASPEN PLUS for an IGCC (Integrated Gasification Combined Cycle) system consisting a dry coal feeding, oxygen-blown entrained gasification process by Shell, a low temperature gas clean up process, a General Electric MS7001FA gas turbine, a three pressure, natural recirculation heat recovery steam generator, a regenerative, condensing steam turbine and a cryogenic air separation unit. The comparison between those results of this study and reference one done by other engineer at design conditions shows consistency which means the soundness of this model. The greater moisture contents in Illinois#6 coal causes decreasing gasifier temperature and the greater ash and sulfur content hurt system efficiency due to increased heat loss. As the results of sensitivity analysis using developed model for the parameters of gasifier operating pressure, steam/coal ratio and oxygen/coal ratio, the gasifier temperature increases while combustible gases (CO＋H2) decreases throughout the pressure going up. In the steam/coal ratio analysis, when the feeding steam increases the maximum combustible gas generation point moves to lower oxygen/coal ratio feeding condition. Finally, for the oxygen/coal ratio analysis, it shows oxygen/coal ratio 0.77 as a optimum operating condition at steam/coal feeding ratio 0.2.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.844-847
• /
• 2009

진공압출성형 공정을 이용하여 한쪽 끝단이 막힌 다공질 탄화규소 캔들 필터를 단일공정으로 제조하는 기술을 확립하였다. 캔들 필터 지지층의 특성 최적화를 위해 탄화규소 출발입자와 무기바인더의 첨가량 변화를 통해 기계적 특성과 기공크기 등의 분석을 수행하여 상용 캔들 필터의 수준에 대응할 수 있는 조합을 도출하였다. Mullite와 clay를 소결조제로 사용하고, $30{\mu}m$ 입도의 탄화규소 입자로 지지층을 제조한 경우, 30% 이상의 기공율을 보유하면서 50 MPa 이상의 상온 3점 굽힘강도를 나타낼 수 있는 조건이 확립됨에 따라 $125{\mu}m$ 입도의 탄화규소와 bi-modal로 사용할 경우, 상용제품의 특성을 상회하는 탄화규소 캔들 필터가 제조될 수 있음을 확인하였다.

• Journal of Energy Engineering
• /
• v.11 no.2
• /
• pp.114-121
• /
• 2002

Alkali metal compounds existed in original coal or sorbents are exhausted as vapor or small particle at the outlet of combustor when operating PFBC power plant. These compounds can be removed with dust removal equipment, but total generation efficiency will be decreased because of lower operating temperature of dust removal equipment. Alkali metal contained in vapor phase is initially deposited onto turbine blade results in serious corrosion. The concentration of alkali vapor in the PFBC flue gas is 20∼40 ppm which is dependent on mineral characteristics and composition as well as operating condition of PFBC. However, the allowance limit of alkali metal vapor is assigned as less than 50 ppb for gas turbine when coal or oil is used as fuel. Therefore, alkali metal vapor in PFBC or IGCC process should be removed by solid sorbents to prevent corrosion of turbine blade and improve plant efficiency. In the present investigation, powder of Bauxite, Kaolinite and Limestone is used in the preparation of cylinder-type pellet which is inserted into the pressurized alkali removal reactor for the alkali absorption experiment. Experimental results showed that the alkali removal efficiency in the order of Bauxite, Kaolinite and Limestone. Alkali vapor removal efficiency is related with reaction temperature, porosity of pellet and alkali vapor concentration of flue gas.

• Economic and Environmental Geology
• /
• v.47 no.5
• /
• pp.551-561
• /
• 2014

Natural gas is the world's fastest-growing fossil fuel, with consumption increasing from 113 trillion cubic feet(Tcf) in 2010 to 185Tcf in 2040. While conventional natural gas streams from the earth relatively easily, unconventional gas finds are more difficult to develop and more costly to produce. Right now, there are six main types of unconventional gas, including deep gas, gas-containing shale, coalbed methane(CBM), geopressurized zones, Arctic and subsea hydrates, and tight gas. Tight gas refers to natural gas reservoirs locked in extraordinarily impermeable, hard rocks(sandstone, siltstone or carbonate sedimentary rocks). In this study, we analyzed total 375 papers(2000-2014) of tight gas by country, institution, international cooperation etc.

• Journal of Energy Engineering
• /
• v.6 no.2
• /
• pp.176-187
• /
• 1997

As a way to evaluate the performance of IGCC (Integrated Gasification Combined Cycle) processes, heating values of coal gas as well as plant efficiency were compared for different rank coals and coal feeding methods by employing the static process simulation technique. Performance of the process was compared with coal rank that was varied by three assorted bituminous coals and also by three subbituminous coals, in addition to the two types of feeding techniques, i.e., dry-feeding and slurry-feeding, that are utilized in entrained-bed coal gasifiers. For the verification of the simulation technique, simulated results were compared first with the actual pilot plant data published from Shell and Texaco. The simulation technique was, then, applied to other coals. Result from tests varying coal rank exhibits the trend of improving both heating content of the product gas and plant efficiency with increasing carbon content in coal. The effect of coal rank is more sensitive in slurry-feeding cases compared to the dry-feeding cases. In particular, considering notably lower values in gas heating value and plant efficiency calculated in the slurry-feeding case that uses a subbituminous coal, limited utilization of the slurry-feeding method for subbituminous coals can be expected. From the plant efficiency point of view, dry-feeding method resulted in higher simulated efficiency values by maximum 3% for subbituminous coals and ca. l% for bituminous coals.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1997.10a
• /
• pp.54-58
• /
• 1997

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.10a
• /
• pp.103-108
• /
• 1998