A Study of Alkali Metal Vapor Adsorption Behavior by Using Pressurized Reactor

가압반응기를 이용한 알칼리금속증기 흡착특성에 관한 연구

  • Published : 2002.06.01

Abstract

Alkali metal compounds existed in original coal or sorbents are exhausted as vapor or small particle at the outlet of combustor when operating PFBC power plant. These compounds can be removed with dust removal equipment, but total generation efficiency will be decreased because of lower operating temperature of dust removal equipment. Alkali metal contained in vapor phase is initially deposited onto turbine blade results in serious corrosion. The concentration of alkali vapor in the PFBC flue gas is 20∼40 ppm which is dependent on mineral characteristics and composition as well as operating condition of PFBC. However, the allowance limit of alkali metal vapor is assigned as less than 50 ppb for gas turbine when coal or oil is used as fuel. Therefore, alkali metal vapor in PFBC or IGCC process should be removed by solid sorbents to prevent corrosion of turbine blade and improve plant efficiency. In the present investigation, powder of Bauxite, Kaolinite and Limestone is used in the preparation of cylinder-type pellet which is inserted into the pressurized alkali removal reactor for the alkali absorption experiment. Experimental results showed that the alkali removal efficiency in the order of Bauxite, Kaolinite and Limestone. Alkali vapor removal efficiency is related with reaction temperature, porosity of pellet and alkali vapor concentration of flue gas.

가압유동층 화력발전소 운전시, 석탄 및 황산화물 흡착제 내에 존재하는 알칼리금속 성분들은 유동층 연소기 출구에서 입자나 증기 형태로 배출된다 이러한 알칼리 성분은 분진제거장치에 의해 제거될 수 있으나, 대부분의 분진 제거장치는 고온, 고압을 유지하지 못하므로 전체 발전효율이 떨어지게 된다. 또한 증기상으로 존재하는 알칼리금속 성분은 터빈날개 부식의 시발점이 되며, 그 배출정도는 석탄 및 흡착제에 포함된 광물의 특성과 조성 및 가압유동층 운전조건에 따라 달라지며 그 농도는 수십 ppm 정도인 것으로 알려져 있다. 반면 가스터빈에 유입되는 연소가스중의 알칼리금속 농도 허용치는 오일 및 석탄 연소의 경우에 50 ppb 이하로 설정되어 있다. 그러므로, 석탄의 유동층연소 및 가스화 과정에서 발생되는 알칼리금속 증기는 고체상의 흡착제를 사용하여 제거하여야만 가스터빈 부식 문제를 해결하고 전체 플랜트 효율을 향상시킬 수 있다. 본 연구에서는 보크사이트, 고령토 및 석회석 흡착제들을 가압 알칼리증기 제거반응기 조건에 알맞도록 실린더 형태의 펠렛으로 성형 및 제조하여 실첨에 사용하였다. 연구결과에 의하면, 보크사이트가 가장 우수한 흡착제로 판단되며 고령토, 석회석 순서로 알칼리 흡착능을 보여 주었으며, 흡착제와 알칼리증기 흡착률은 반응온도, 펠렛의 다공도, 및 반응가스 중 알칼리 농도와 밀접한 관계를 보여 주었다.

Keywords

References

  1. Fluidized Bed Combustion v.2 Release of sodium and potassium in the PFB combustion of peat and coal Jaana Laatikainen;Matti Nieminen (et al)
  2. AIChE Journal v.35 no.7 High-temperature adsorption of alkali vapors on solid sorbents W.A. Punjak;M. Uberoi;F. Shadman
  3. MERC/RI/77-5 Factors influencing formation of alkali sulfates in fossil fuel combustion John S. Wilson;Donald W. Gillmore
  4. Jr. of the Institute of Energy The themodynamics of alkali removal from coal-derived gases L A SCANDRETT BEng;R CLIFT MA
  5. Ind. Eng. Chem. Res v.30 Simultaneous condensation and reaction of metal compound vapors in porous solids Mohit Uberoi;Farhang Shadman
  6. DOE Topical Report v.3 Second-generation pressurized fluidized bed combustion plant conceptual design and optiminzation of a second generation PFBC combustion plant, phase 1, task 1 A. Robertson;R. Garland;R. Newby;a. Rehmat
  7. 무기재료공업개론 이종근;김종옥;백용혁;이진성;이병하
  8. b; Mahuli, Agnihotri, Chauk Ghosh-Dastidar (et al)
  9. Illinois State Geological Survey, Circular Chlorine in Illnois coal H.J. Gluskoter;O.W. Rees
  10. Ind. Eng. Chem. Res. v.38 The role of the filter cake in hot gas cleaning with ceramic filters Wenli Duo;John R. Grace;C. Jim Lim;Clive M.H. Brereton;A. Paul Watkinson;Karin Laursen