• Korean journal of applied entomology
• /
• v.58 no.4
• /
• pp.347-354
• /
• 2019

Temperature-dependent traits of Laodelphax striatellus, rice stripe virus vector, were investigated at 10 constant temperatures (12.5, 15.0, 17.5, 20.0, 22.5, 25.0, 27.5, 30.0, 32.5, and 35.0 ± 1℃) under a fixed photoperiod (14/10-hr light/dark cycle). Unit functions for the oviposition model were estimated and implemented into a population dynamics model using DYMEX. The longevity of L. striatellus adults decreased with increasing temperature (56.0 days at 15.0℃ and 17.7 days at 35.0℃). The highest total fecundity (515.9 eggs/female) was observed at 22.5℃, while the lowest (18.6 eggs/female) was observed at 35.0℃. Adult developmental rates, temperature-dependent fecundity, age-specific mortality rates, and age-specific cumulative oviposition rates were estimated. All unit equations described adult performances of L. striatellus accurately (r² =0.94~0.97). After inoculating adults, the constructed model was tested under pot and field conditions using the rice-plant hopper system. The model output and observed data were similar up to 30 days after inoculation; however, there were large discrepancies between observed and estimated population density after 30 days, especially for 1^st and 2^nd instar nymph densities. Model estimates were one or two nymphal stages faster than was observed. Further refinement of the model created in this study could provide realistic forecasting of this important rice pest.

• Korean journal of applied entomology
• /
• v.58 no.4
• /
• pp.305-311
• /
• 2019

Artificial interspecific matings between Matsumuraeses phaseoli and M. falcana (Lepidoptera: Tortricidae) were conducted to know the possibility of hybridization of the two sympatric species. Reciprocal crossings successfully produced F1 hybrids. Most of F2 crosses yielded progenies except all mating trials with females of F1 hybrid obtained from M. phaseoli female. Inbreedings of the F2 hybrids produced F3 progenies. In backcrossings between F1 hybrids and parent lines, all the two mating trials with females of F1 hybrid obtained from M. phaseoli females did not produce any progeny, while other 6 backcrosses produced the next generations. Inbreedings of the backcross lines also produced subsequent progenies. These results indicated that F1 females produced from hybridization between M. phaseoli females and M. falcana males were sterile. Conclusively, it suggested that a partial reproductive isolation at a postzygotic stage can occur between the two sympatric species.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.2
• /
• pp.75-88
• /
• 2017

This study analyzed wind flows based on spatial and geomorphological characteristics of Daegu Metropolitan City. A three-stage analysis was performed, starting with a comparison of meteorological relationships between local wind direction (synoptic wind) and local wind flow. In the second stage the study area was subdivided into districts and suburban districts to analyze the relative change of local wind flow. In stage three, the formation of wind corridor for local wind flow, wind flow for the entire urban space, and spatial relationships between flows were verified comparatively using KLAM_21. Three results are notable, the first of which is a low correlation between synoptic wind of a region, and local wind, flow in terms of meteorology. Secondly, observations of local wind flow at five downtown districts and two suburban districts showed that there were diverse wind directions at each measurement point. This indicates that the spatial and geomorphological characteristics of areas neighboring the measurement points could affect the local wind flow. Thirdly, verifying the results analyzed using KLAM_21, compared to Atomatic Weather System(AWS) measurement data, confirmed the reliability of the numerical modelling analysis. It was determined that local wind flow in a city performs a spatial function and role in ameliorating the urban heat island phenomena. This indicates that, when an urban planning project is designed, the urban heat island phenomena could be ameliorated effectively and sustainably if local wind flow caused by immediate spatial and geomorphological characteristics is confirmed systematically and techniques are intentionally applied to connect the flows spatially within areas where urban heat islands occur.

• Journal of Navigation and Port Research
• /
• v.42 no.3
• /
• pp.237-244
• /
• 2018

When underwater rubble leveling work is carried out by a robot, real-time information on the topography around the robot is required for remote control. If the topographical information with respect to the current position of the robot is displayed as a 3D graphic image, it allows the operator to plan the working schedules and to avoid accidents like rollovers. Up until now, the topographical recognition was conducted by multi-beam sonars, which were only used to assess the quality before and after the work and could not be used to provide real-time information for remote control. This research measures the force delivered to the bucket which presses the mound to determine whether contact is made or not, and the contact position is calculated by reading the cylinder length. A variable bang-bang control algorithm is applied to control the heavy robot arms for the positioning of the bucket. The proposed method allows operators to easily recognize the terrain and intuitively plan the working schedules by showing relatively 3-D gratifications with respect to the robot body. In addition, the operating patterns of a skilled operator are programmed for raking, pushing, moving, and measuring so that they are automatically applied to the underwater rubble leveling work of the robot.

• Korean journal of applied entomology
• /
• v.48 no.1
• /
• pp.29-35
• /
• 2009

Three lepidopteran insect pests of the legume pod borer, Maruca vitrata (Lepidoptera: Pyralidae), the soybean pod worm, Matsumuraeses phaseoli (Lepidoptera: Tortricidae) and an Ostrinia spp. (Lepidoptera: Pyralidae) attacking adzuki bean, Vigna angularis, were confirmed as the major insect pests during the reproductive developmental stage of adzuki bean, and M. vitrata existed dominantly. Almost all plants in the adzuki bean field were injured by at least one of the three species, and $15{\sim}60%$ of reproductive organs were injured. Unbloomed inflorescence occurred continuously through the reproductive stage of adzuki bean. While the flower was many at the early stage and its number soon decreased, the pod was few at the early stage, but its number increased soon and maintained at a constant level. The results suggested that the adzuki bean injured by insect pests compensate the flower loss by developing new inflorescence, but the compensation do not cause the development of new pods. While M. vitrata and M. phaseoli were observed in flowers, pods and stem mainly during the first half of reproductive stage of adzuki bean, Ostrinia spp. was observed only in pods and stem during the second half. In addition, while all instars of larvae of M. vitrata were observed, larvae between the third and fifth instars for M. pahseoli and Ostrinia spp. were observed.

• Korean journal of applied entomology
• /
• v.59 no.1
• /
• pp.73-78
• /
• 2020

The fall armyworm, Spodoptera frugiperda (Smith, 1797), originated from tropical and subtropical America is one of sporadic agricultural pests in the world. Since the moth has high migration capacity, it rapidly expanded the world distribution such as Africa in 2016, India in 2018, and East-Asian countries in 2019. In Korea, this species was firstly found at maize fields of Jeju Island, in early June 2019, and subsequently detected at many counties of Jeolla-do and Gyeongsang-do in June and July 2019. The first invaded populations of S. frugiperda in Korea were genetically confirmed as one species, S. frugiperda by using a mitochondrial cytochrome oxidase subunit I (COI) gene, and analyzed to be comprised of two haplotypes (hap-1 and hap-2) each belonging to different clades. Among 31 COI sequences, the hap-1 sequence was predominant, accounting for 93.5%.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.5
• /
• pp.513-523
• /
• 2016

The stress concentration factors and stress intensity factors for a simple beam and a cantilever are analyzed by using finite element method and phtoelasticity. Using the analyzed results, the estimated graphs on stress concentration factors and stress intensity factors are obtained. To analyze stress concentration factors of notch, the dimensionless notch length H(height of specimen)/h=1.1~2 and dimensionless gap space r(radius at the notch tip)/h=0.1~0.5 are used. where h=H-c and c is the notch length. As the notch gap length increases and the gap decreases, the stress concentration factors increase. Stress concentration factors of a simple beam are greater than those of a cantilever beam. However, actually, the maximum stress values under a load, a notch length and a gap occur more greatly in the cantilever beam than in the simple beam. To analyze stress intensity factors, the normalized crack length a(crack length)/H=0.2~0.5 is used. As the length of the crack increases, the normalized stress intensity factors increase. The stress intensity factors under a constant load and a crack length occur more greatly in the cantilever beam than in the simple beam.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.353-359
• /
• 2020

In this study, the controller structure and control algorithm of medical robot bed developed for pressure ulcer prevention and healing are described. The existing pressure ulcer prevention mattress is operated manually and the remaining maximum body pressure exceeds the pressure of ulcer generation, so there is always room for pressure ulcers. However, the system developed in this study does not generate the pressure ulcers because the body pressure drops to zero when the keyboard of the bed descends using the active electric driving keyboard. In addition, even if the bed is raised and the pressure above the critical body ulcer pressure is abnormal, the device and the control algorithm are designed so that the lasting time is within the pressure ulcer generation critical time and the pressure ulcer itself is not generated. The bed key board motor is a motor designed with the BLDC servos suitable for medical use and these can communicate each other easily through CAN(Car Area Network). The system is new medical robot bed that is effective in preventing pressure ulcers and will be distributed to many patients suffering from pressure ulcers.

• Journal of Plant Biology
• /
• v.24 no.4
• /
• pp.171-179
• /
• 1981

The membrane-bound ATPases were separated on sucrose gradient from corn roots and characterized by pH optima, sensitivity to monovalent salt, Km and Vmax. The pH optima for the activity of all the ATPases associated with 13, 000g pellet and 13, 000~80, 000g pellet were 5 and 9, respectively. The ATPases in Fractions B and C of the 13, 000 g pellet were more active at pH 5 than pH 9. While, in the case of Fractions D, E and F, they were reverse. The activities of the ATPase in Fractions A and C of the 13, 000~80, 000 g pellet were greater at pH 5 than pH 9. On the other hand, the ATPases in Fractions B, D, E, and F were more active at pH 9 than pH 5. The optimum concentraction of ATP for the assay was about 3 to 5 mM. The Km's for the membrane-bound ATPases in 13, 000g pellet and in 13, 000~80, 000 g pellet were 0.25 mM. While Vmax values for 13, 000g pellet were from 8.0 to 12.5 $\mu$M Pi/mg protein/hr. according to pH values, those for 13, 000~80, 000 g pellet were from 35.7 to 55.6 $\mu$M Pi/mg protein/hr. Activities of the membrane-bound ATPases in both 13, 000 g pellet and 13, 000~80, 000 g pellet were stimulated with increasing the concentration of $K^+$.

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.681-686
• /
• 2019

In this work, the effect of the culture medium composition on microbial growth and ethanol production in Clostridium autoethanogenum culture was investigated to enhance the ethanol productivity. D-Ca-pantothenate, vitamin B₁₂ (as vitamins), and sodium sulfide (as sulfur source) were selected as examined components, and the effects of components' concentration on cell growth and ethanol production was investigated. For D-Ca-pantothenate concentrations varing from 0.5, 5, 50 and 500 mg/L, a slight increase in the ethanol production was observed at the 0.5 mg/L, but negligible differences in microbial growth and ethanol production were measured for the concentration ranges examined. The effect of vitamin B₁₂ concentrations from 0.1, 1.0, 10, and 100 mg/L on the microbial growth and ethanol production was investigated, and it was found that the ethanol production using a 0.1 mg/L of vitamin B₁₂ concentration increased by 245% compared to that of using the basic medium concentration (10 mg/L). The effect of sodium sulfide concentrations (0.5, 5, and 10 g/L) on the microbial growth and ethanol production was also studied, and the inhibition of microbial growth was observed when the sodium sulfide usage was over 0.5 g/L. In conclusion, changes in D-Ca-pantothenate and sodium sulfide concentrations did not affect the ethanol production, whereas even a 100 times lower concentration of vitamin B₁₂ than that of the basic medium improved the production.