• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.77-85
• /
• 2010

Recently, As increasing cleanroom size, Stocker system is trending the large size and long distance for LCD material transfer system In order to rise a rate of production, the manufacturer are on the decrease of total tact time with Stocker system And the manufacturer are requested to high speed of next generation Stocker system Also manufacturers for the high oil prices through energy-saving conservation to minimize plant operating costs are required. Therefore, this paper propose optimal design of high efficiency Contactless Power Supply(CPS) system about high speed and energy savings of next generation Stocker system This paper proposes CPS system is applied in the long distance and straight section with Stocker system for energy savings. The test results of input!output characteristic and efficiency of CPS system on operating pattern of Stocker system were analyzed, and proved the applicability on commercial use.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.263-272
• /
• 2013

Printed electronics creates electrically functional devices by printing on variety of substrates. Printing typically uses common printing equipment or other low-cost equipment suitable for defining patterns on material, such as screen printing, flexography, gravure, offset lithography and inkjet. Compared to conventional manufacturing of microelectronics, printed electronics is characterized by simpler and more cost-effective fabrication of high and low volume products. Now there is huge effort towards printing many other more functional components, from displays to transistors to photovoltaic cells, using the full range of printing technologies - from inkjet to roll to roll analogue print techniques. The market for printed electronics will rise from $1.99 billion in 2010 to $55.10 billion in 2020. In 2030, this industry could be $300 billion - larger than the silicon semiconductor industry - from lighting to displays[8].

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.182-188
• /
• 2008

The compounds of recycled polyethylene(PE) and fly-ashes were prepared. Polymers used were sorted PE from mixed plastics of household waste and Low Density Polyethylene(LDPE) and Linear Low Density Polyethylene(LLDPE) recycled from the scrap of packaging film plants. Fly-ashes were from the power plant and from the household waste incinerator. The tensile strength of recycled LDPE and LLDPE compounds decreased and the flexural modulus increased with greater amount of the power plant fly-ash. Anthracite fly-ash gave rise to slightly higher tensile and flexural strength of the LLDPE mixtures than bituminous coal fly-ash presumably due to higher content of unburned carbon. The incinerator fly-ash introduced to household waste PE enhanced both tensile strength and flexural modulus of the compounds. When LDPE and household waste PE were used together, the synergistic effect of incinerator fly-ash to household waste PE was offset by reduced crystallization of LDPE due to the filler particle. The compounds of household waste PE and incinerator fly-ash might be applied to structural materials for such as sewage pipe, which reduces the waste treatment cost and conserve the environment and resources.

• Tunnel and Underground Space
• /
• v.16 no.4 s.63
• /
• pp.296-306
• /
• 2006

It is difficult to solve problems regarding the adjustment on demand and supply of LNG due to seasonal variations of domestic demand of LNG, a discordance among import pattern and limits of storage facilities and so on. Also, there may be instability in LNG supply due to chances of accidents at LNG producing areas. Therefore, it is very important to secure large LNG storage facilities and to stabilize LNG supply management on a long term basis. The objective of this study is to examine the real-scale applicability of a lined underground rock storage system, which have been verified by a successful operation of the Daejeon LNG pilot plant. The new technology has many advantages of better economy, safety and environment protection, for above-ground and in-ground storage systems. The results of this study may promote the first ever real scale underground LNG storage system in a rock cavern.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.1
• /
• pp.121-128
• /
• 2016

The restructuring of Korean railway industry, separation of between train operators and an infrastructure manager, had been conducted in 2004 to increase the productivities of railway operations. However, the maintenance-staffs are still employed by Korail (train operator), not by the infrastructure manager, which led the maintenance of railway infrastructure to be conducted by the train operator. The infrastructure manager is now only taking care of financial transferring issues once the train operator requests expenses spent for facility maintenance. Such incomplete restructure may result in a lack of safety performance on railway operations as the roles and responsibilities are less likely to be assigned under the multiple train operators. Thus, this study proposes the way of structuring maintenance divisions and their roles and responsibilities to assure the safe work execution under the circumstance of multiple train operators on the same rail network.

• Journal of the Korean Institute of Gas
• /
• v.10 no.3 s.32
• /
• pp.13-19
• /
• 2006

As a way of improving the safety of the facilities, the risk based-inspection (RBI) was executed for the chemical facilities by using K-RBI program, which has been developed based on the API-581 based resource document (BRD). As the result of the evaluation, we found the level of the process safety management (PSM) for the applied plant, quantitative risk of the applied process, risk of static facilities and pipes, and the damage mechanism of the facilities. Thus, we could suggest a proper inspection frequency using the calculated risk of the process and the status of the facilities. The applied plant achieved a reduced inspection cost by an extension of the inspection frequency, improved productivity, improved reliability of the facilities, and a computerized history management.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.507-507
• /
• 2013

유리기판으로 투과되는 빛들 중에는 내부 전반사나 wave-guided mode로 인하여 손실이 일어나 일반적으로 20%의 광추출 효율을 가진다. 이러한 문제점을 해결하기 위한 연구에는 Photonic Crystal과 같은 주기적인 나노 구조물이 있는데 이러한 구조물을 제작하기 위한 마스크 공정 과정은 대부분 복잡하거나 비싼 단점이 있다. 이에 본 발표에서는 마스크 없이 비정질소다라임 유리의 구조물 생성으로 광 추출 효율이 상승하는지 보고자 하였다. M-ICP (Magnetized-Induced Coupled Plasma)란 용량 결합형 플라즈마와 유도 결합형 플라즈마 두 가지 방식의 플라즈마를 이용한 것인데 용량 결합형 플라즈마를 이용해 이온이 sheath에 의해 가속되어 유리표면에 부딪히고 그에 따라 유리가 식각되는 물리적 식각을 이용하였다. 또한 이온의 밀도를 조절하기 위해 유도결합형 플라즈마 방식을 이용하여 식각률을 높였다. 화학적 식각을 위해서는 CF4와 O2혼합 가스를 이용해 F가 Si와 결합하여 SiF4가 되어 사라지고 탄소잔여물인 C는 O2와 반응하여 제거하였다. 그 결과, 랜덤한 분포를 가지는 미세한 구조물(stochastic sub-wavelength structure)을 유리 표면에 형성할 수 있었고, 또한 다양한 가스 종류와 압력, source power와 bias power, 그리고 시간을 바꿔가며 미세 구조물들을 관찰하였다. 실험 결과, 가시광선 파장 이하의 높이를 갖고 수 마이크로미터의 너비를 갖는 구조물이 전반사되는 빛을 효율적으로 추출하는 것을 산란되는 빛의 정도인 diffusive transmittance 가 기존 0%에서 15% 정도로 증가하는 것으로 스펙트로포토미터 측정을 통해 확인하였다. 이러한 유리 기판 위 구조물 생성방법을 OLED에 적용한다면 적은 비용으로 소자의 효율을 크게 향상 시킬 수 있을 것이다. 또한 본 처리 과정의 장점은 기존의 방법에 필요한 스퍼터링이나 RTA 처리 과정이 필요 없어 공정 단가 절감과 제조 공정의 단순화로 높은 생산성을 얻을 수 있으며 대면적화에도 유리하다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.3
• /
• pp.217-225
• /
• 2013

It is time to develop new renewable energy that could fundamentally replace fossil fuel, which has been increasingly needed due to environmental pollution and energy security. Korean marine bio-energy development project is planned to produce 50% of total bioenergy. This study attempts to measure the greenhouse gas emission reduction benefits of marine bio-energy development project through contingent valuation method. Single bounded dichotomous choice (SBDC) is applied with spike model. The results show that the average willingness to pay are estimated to be KRW 4,190 at SBDC, per household per year. If the result has been expanded to the region which is survey conducted, KRW 50.1 billion annually. These quantitative information can be usefully utilized in the cost benefit analysis to implement project and policy-making for the industrialization of marine bio-energy development project.

• Journal of Internet Computing and Services
• /
• v.5 no.4
• /
• pp.11-22
• /
• 2004

Works that improve the process and notify the improved process, the product and the change of tasks to all users are essential in achieving project. Existent project management tools support the definition and the change of project activities, and configuration management tools support version check, workspace management. build management. etc. It costs too much to buy each tool. as well as, it is burdensome to learn usage for various tools. Therefore the web-based integrated tool is proposed to manage the process and artifacts at a time in this paper. The proposed tool defines component based development process model. and achieves recording of process progression, processing the request of change, reporting the progression of each task, product registering and change, version recording, artifact or form search, etc. using ebXML. Furthermore, the stakeholders get the systematic management and standardization by sharing information that are necessary in process achievement and configuration management in distributed environment using the integrated management tool.

• Journal of KIISE:Software and Applications
• /
• v.41 no.7
• /
• pp.469-480
• /
• 2014

Software Product Line (SPL) is a software development paradigm that guarantees high productivity, reduced cost, and shorter time-to-market by systematically planning and reusing commonality and variability. In order to maximize the benefits of SPL engineering, testing should be integrated into the SPL engineering lifecycle processes that consist of domain engineering and application engineering and should be performed with as little test efforts as possible. This paper proposes a systematic software product line test cases derivation method using combinatorial test design. By applying combinatorial test design to product line test cases derivation and exploiting commonality between products at the same time, the number of generated test cases is dramatically reduced with the result that they can be effectively reused by the products of the given product line. Case studies conducted in this paper show the efficacy of our method compared with other methods that use only commonality or combinatorial design or neither of them in terms of the number of derived test cases.