• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.286-290
• /
• 2008

This paper summarizes the components of an explicit aeroelastic solver developed especially for the simulation of dynamic fracture events occurring during the flight of solid propellant rockets. The numerical method combines an explicit Arbitrary Lagrangian Eulerian (ALE) version of the Cohesive Volumetric Finite Element (CVFE) scheme, used to simulate the spontaneous motion of one or more cracks propagating dynamically through a domain with regressing boundaries, and an explicit unstructured finite volume Euler code to follow the flow field during the failure event. A key feature of the algorithm is the ability to adaptively repair and expand the fluid mesh to handle the large geometrical changes associated with grain deformation and crack motion.

• The Journal of the Petrological Society of Korea
• /
• v.19 no.2
• /
• pp.109-121
• /
• 2010

Mt. Mudeung is located in Gwangju city, Damyang-Gun, Hwasun-Gun and its round form give us the mood of soft and rich. Its location is $126^{\circ}06'-127^{\circ}01'E$ and $35^{\circ}06'-35^{\circ}10'N$ and its highest peak is Cheonwang-bong with the height of 1,187 m. The Gwangju city is located in the West of Mt. Mudeng and the mountain range with a small basin in its East. The pavilion such as the Soswaewon, Songganjeong, Sigyongjeong are distributed along the stream in the north of Mt. Mudeung. The mountain is formed from the volcanic activity, Gwangju cauldron during the Cretaceous. The top part of Mt. Mudeung is composed of dark gray quartz-andesite and its K-Ar whole rock age is $48.1{\pm}1.7Ma$. The composition of the north area, where the Wonhyosa temple is located, is micrographic granite, whereas the composition of south area is rhyolite mainly. The main ridge of Mt. Mudeung runs from North, starting from the Bukbong, to south, passing Cheonwangbong, Jangbuljae and ending Anyangsan. Geologic feature of the mountain includes volcanic landform, mountaineous landform, and stream landform. The Seosukdae, Ipseokdae, Gyubongam, which are main ridges and formed from volcanic activity, are composed of mainly columnar joint. Saeinbong and Majipbong in the south-west are composed of mainly cliff and dome. The typical erosion landform of the mountain has three different types of the weathering-cave, each of which reflect the property of the original rock. Four different area of wide block stream, they makes the geological feature of spring-water, though its scale is small compared to that of water fall.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.3 s.70
• /
• pp.295-303
• /
• 2004

In this paper, an improved four-node Reissner-Mindlin plate-bending element with enhanced assumed strain field is presented for the analysis of isotropic and laminated composite plates. To avoid the shear locking and spurious zero energy modes, the transverse shear behavior is improved by the addition of a new enhanced shear strain based on the incompatible displacement mode approach and bubble function. The "standard" enhanced strain fields (Andelfinger and Ramm, 1993) are also employed to improve the in-plane behaviors of the plate elements. The four-node quadrilateral element derived using the first-order shear deformation theory is designated as "14EASP". Several applications are investigated to assess the features and the performances of the proposed element. The results are compared with other finite element solutions and analytical solutions. Numerical examples show that the element is stable, invariant, passes the patch test, and yields good results especially in highly distorted regimes.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.2 s.314
• /
• pp.144-152
• /
• 2007

We propose a 3D modeling method for surface inspection of non-linear moving object. The laser lines reflect the surface curvature. We can acquire 3D surface information by analyzing projected laser lines on object. ill this paper, we use multi-line laser to make use of robust of single stripe method and high speed of single frame. Binarization and channel edge extraction method were used for robust laser line extraction. A new labeling method was used for laser line labeling. We acquired sink information between each 3D reconstructed frame by feature point matching, and registered each frame to one whole image. We verified the superiority of proposed method by applying it to container damage inspection system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.1
• /
• pp.21-29
• /
• 2016

This paper proposes a method to determine the initial equilibrium state of cable members for preliminary analysis of multi-span suspension bridge under dead load. The proposed method is simpler and more practical than the previous methods used in other studies. The proposed method can be applied to three-span or multi-span suspension bridges. To verify the proposed method, an three-span model as well as four-span models such as New Millenium Bridge in Korea and Yingwuzhou Bridge in China are analyzed. In the verification results, the initial coordinates and tensions of the members calculated by the proposed method are good agreement with those in the previous study for the three-span model and those in the design data of New Millenium Bridge. In addition, the proposed method gives the initial values to keep the initial configuration of Yingwuzhou Bridge.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1315-1326
• /
• 2013

Geometric form of a suspension bridge that uses load-sensitive cables takes on not only resisting loads but also becoming a visually sensible shillouette. This study has proposed a preliminary structural form planning for a suspension bridge following force flow by adopting the two possibilities of the graphic statics. First, the force polygon allows alternative load paths for the same loading condition. Second, a new structural form for the newly developed load path can be constructed using the reciprocal principle that exits between a structure space and the corresponding force polygon. Major structural form parameters that affect both structural and aesthetic aspecs are first identified. The relationships between structural forms and the corresponding force polygons are then investigated for the identified parameters. Upon the investigation, a stepwise process is developed for a preliminary structural form planning for a suspension bridge. The proposed structural form planning method is general that can be easily expanded to generate design alternatives of similar form-active structural systems. It is also expected that this method will be used as an educational tool to explain the interrelationships between structural forms and their force flows.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.4
• /
• pp.423-430
• /
• 2010

Hot closed-forging process and the die used for forming an automotive flange were analyzed from the viewpoints of heat transfer, grain-flow lines, and stresses to obtain a forged product without defects such as surface cracks, laps, cold shots, and partial filling. The forging process including up-set, pre-forging, final forging and pressing forces was investigated using finite element analysis. The influence of the preform die and the ratio of the heights of the upper die to lower die on the forging process and die were investigated and a die shape ($10^{\circ}$ for the preform die, and 1.5:1 ratio for the final die) suitable to achieve successful forging was determined on the basis of a parametric study. All parametric design requirements such as strength, full filling, and a load limit of 13,000 KN were satisfied for this newly developed flange die. New dies and flanges were fabricated and investigated. Defects such as partial filling and surface cracks were not observed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.4
• /
• pp.1-11
• /
• 2020

In this study, study on the internal ballistic analysis method for single-chamber dual-thrust rocket motors meeting a dual-thrust profile requirement by tailoring the grain burning area is presented. The analysis method, which can acquire variables required for the performance prediction, considering gradual change of burning rate correction factor and specific impulse in the transition phase, is proposed. Improvements compared to the analysis method in the previous study, which do not consider change in the transition phase, are verified through comparison between the newly proposed method and the method in the previous study. Internal ballistic variables are obtained for four different ground firing test conditions using the proposed method, and the performance prediction for each condition is conducted using these variables. These prediction results and the ground test data are in good agreement, so it is confirmed that the performance prediction of dual-thrust motors with same design geometries based on the proposed analysis method is available.

• 지역과문화
• /
• v.6 no.3
• /
• pp.79-105
• /
• 2019

In the Geumseongsan Tumulus of the Uiseong area where the Jomunguk was existed in the Three Han Period, many relics such as metal craft ornaments and Uiseong-style earthernware were excavated. However, it is hard to find cases where the excavated relics were used to develop cultural products. In this study, symbolic relics which can express the culture of Uiseong Jomunguk were selected from excavated relics. Then, the basic design that can be applied to various cultural products were derived from symbolic relics. In order to select symbolic relics, the formative characteristics of the metal craft relics excavated from the Tablili Tumulus and the Dali Tumulus were examined. As a result, a gilt-bronze crown excavated from the Tablili Tumulus was selected as a symbolic relics. And then the basic desin was derived from the gilt-bronze crown. The basic design is expressed in the form of birds based on the bird's feather shape at the edge of the standing ornaments and the record of the Bongdae(鳳臺), the phoenix's habitat. And the application design that changed the expression of the birds' face was presented. The earthenware excavated from the Uiseong area was designed as a soil pot and applied various indoor air purification plants. The result of this study, which reinterprets and reconstructs the historical and cultural resources of the region in accordance with the modern sense, can be used as useful data for the development of cultural products of Jomunguk. Furthermore, if the design derived from the Jomunguk relics is used as a representative symbol of the area, it will be possible to derive an image of a differentiated region from other regions. Finally, it is expected that the result of this study will be a chance to re-evaluate the value of the historical and cultural resources in the region.

• Journal of the Daesoon Academy of Sciences
• /
• v.33
• /
• pp.31-62
• /
• 2019

The purpose of this article is to study on the Daesoon Cosmology of the Correlative Relation between Mugeuk and Taegeuk. Daesoon cosmology is a cosmology based on the juxtaposition between the Gucheon Sangje and the world. In this article, I would like to say that this theory in Daesoon Thought was developed in three stages: the phase of the Mugeuk Transcendence of Gucheon Sangje, the stage of the Taegeuk Immanence, and the phase of the Grand Opening of the Later World between Mugeuk and Taegeuk as a correlative gentle reign. First of all, the phase of the Mugeuk Transcendence of Gucheon Sangje has been revealed as a yin-yang relationship. The stage of the Taegeuk Immanence represents the togetherness of harmony and co-prosperity between yin and yang, and the phase of the Grand Opening of the Later World between Mukeuk and Taegeuk refers to the unshakable accomplishment of its character and energy. It will be said that this is due to the practical mechanism in the correct balance of yin-yang making a four stage cycle of birth, growth, harvest, and storage. In addition, the Daesoon stage of the settlement of yin and yang is revealed as a change in the growth of all things and the formation of the inner circle. The mental growth reveals the characteristics of everything in the world, each trying to shine at the height of their own respective life as they grow up energetically. The dominant culture of cerebral communion renders a soft and elegant mood and combines yin and yang to elevate the heavenly and earthly period through transcendental change into sympathetic understanding. The stage of the Grand Opening of the Later World between Mugeuk and Taegeuk is one of the earliest days of the lunar month and also the inner circle of Taegeuk. It is in line with Ken Wilbur's integrated model as a step to the true degrees to develop into a world with brightened degrees. It is a beautiful and peaceful scene where celestial maidens play music, the firewood burns, and the scholars command thunder and lightning playfully. Human beings achieve a state of happiness as a free beings who lives as gods upon the earth. This is the world of theGrand Opening of the Later World between Mugeuk and Taegeuk. Daesoon Thought was succeeded by Dojeon in 1958, when Dojeon emerged as the successor in the lineage of religious orthodoxy and was assigned the task of handling Dao in its entirety. In addition, Daesoon is a circle and represents freedom and commonly shared happiness among the populous. Cosmology in the Daesoon Thought will enable us to understand deep dimensions and the identity of members as individuals within an inner circle of correlation between transcendence and immanence. This present study tries to analyze the public effects philologically and also the mutual correlation by utilizing the truthfulness of literature and rational interpretation. The outlook for the future in Daesoon Thought also leads to the one-way communication of Daesoon as a circle.