KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Initial Equilibrium State Analysis of Cable Members for Preliminary Analysis of Multi-span Suspension Bridge under Dead Load

고정하중을 받는 다경간 현수교의 예비해석을 위한 케이블 부재의 초기평형상태 해석

  • 최동호 (한양대학교 건설환경공학과) ;
  • 나호성 (삼성엔지니어링 토목사업부) ;
  • 권순길 (한양대학교 건설환경공학과)
  • Received : 2013.07.31
  • Accepted : 2015.12.31
  • Published : 2016.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposes a method to determine the initial equilibrium state of cable members for preliminary analysis of multi-span suspension bridge under dead load. The proposed method is simpler and more practical than the previous methods used in other studies. The proposed method can be applied to three-span or multi-span suspension bridges. To verify the proposed method, an three-span model as well as four-span models such as New Millenium Bridge in Korea and Yingwuzhou Bridge in China are analyzed. In the verification results, the initial coordinates and tensions of the members calculated by the proposed method are good agreement with those in the previous study for the three-span model and those in the design data of New Millenium Bridge. In addition, the proposed method gives the initial values to keep the initial configuration of Yingwuzhou Bridge.

본 연구에서는 고정하중을 받는 다경간 현수교의 예비해석을 위한 케이블 부재의 초기평형상태 해석방법을 제안한다. 본 연구에서 제안한 초기 평형상태 해석 알고리즘은 타 연구들에서 사용된 기존 방법들보다 간편하고 실용적이며, 3경간 현수교 및 다경간 현수교에 적용 가능하다. 제안방법의 타당성을 검증하기 위해, 3경간 현수교 예제모델과 4경간 현수교인 국내의 새천년대교 및 중국의 Yingwuzhou Bridge 모델을 사용하여 초기평형상태 해석을 수행하였다. 검증 결과, 본 연구에서 제안한 초기평형상태 해석방법에 의한 결과가 3경간 예제모델의 선행 연구결과 및 새천년대교의 설계값과 잘 일치하는 경향을 나타내었으며, 제안 방법은 Yingwuzhou Bridge에 대한 초기형상을 잘 유지하는 초기값들을 도출하였다.

Keywords

References

  1. Chen, Z., Cao, H., Ye, K., Zhu, H. and Li, S. (2014). "Improved particle swarm optimization-based form finding method for suspension bridge installation analysis." Journal of Computing in Civil Engineering, ASCE, Vol. 29, No. 3, pp. 1-13. https://doi.org/10.1111/mice.12055
  2. Cho, K. S., Kim, J. H. and Ahn, N. K. (2006). "Development of a suspension bridge analysis program using TCUD." Proceeding of Conference of Korean Society of Steel Construction, pp. 268-274 (in Korean).
  3. ENVICO Consultant Co., Ltd. (2009). The design report of the New Millennium Bridge (in Korean).
  4. Karoumi, R. (1999). "Some modeling aspects in the nonlinear finite element analysis of cable supported bridges." Computers & Structures, Vol. 71, pp. 397-412. https://doi.org/10.1016/S0045-7949(98)00244-2
  5. Kim, H. K. and Lee, J. H. (2003). "Effects of initial tension on seismic response for a suspension bridge." Journal of Korean Society of Civil Engineers, Vol. 24, No. 3A, pp. 533-539 (in Korean).
  6. Kim, H. K., Lee, M. J. and Chang, S. P. (2002). "Non-linear shape finding analysis of a self-anchored suspension bridge." Engineering Structures, Vol. 24, pp. 1547-1559. https://doi.org/10.1016/S0141-0296(02)00097-4
  7. Kim, J. C. and Chang, S. P. (1999). "Determination of initial shape and fabrication camber for cable-stayed bridges using initial member force." Journal of Korean Society of Civil Engineers, Vol. 19, No. 1-3, pp. 377-386 (in Korean).
  8. Kim, K. S. and Lee, H. S. (2001). "Analysis of target configurations under dead loads for cable-supported bridges." Computers & Structures, Vol. 79, pp. 2681-2692. https://doi.org/10.1016/S0045-7949(01)00120-1
  9. Kim, M. Y., Kyung, Y. S. and Lee, J. S. (2003). "An improved method for initial shape analysis of suspension bridges." Journal of Korean Society of Steel Construction, Vol. 15, No. 2, pp. 219-229 (in Korean).
  10. Kim, H. K. (1993). Three Dimensional Analyses of Suspension Bridges Considering Construction Stages, Ph.D. Dissertation, Seoul National University (in Korean).
  11. Kim, M. and Kim, M. Y. (2010). "Initial shape analysis of suspension bridge system under dead load." Journal of Korean Society of Steel Construction, Vol. 22, No. 6, pp. 511-521 (in Korean).
  12. Lee, M. J. (1998). Construction Stage Analysis and Error Control of Suspension Bridges on the Basis of Initial Equilibrium State, Ph.D. Dissertation, Seoul National University (in Korean).
  13. Lonetti, P. and Pascuzzo, A. (2014). "Optimum design analysis of hybrid cable-stayed suspension bridges." Advanced in Engineering Software, Vol. 73, pp. 56-66.
  14. Wang, P. H., Tseng, T. C. and Yang, C. G. (1993). "Initial shape of cable stayed bridge." Computers & Structures, Vol. 47, No. 1, pp. 111-123. https://doi.org/10.1016/0045-7949(93)90284-K