Proceedings of the International Microelectronics And Packaging Society Conference
/
2001.11a
/
pp.165-170
/
2001
AIC$_3$:$^{t}$ BuNH$_2$단일 전구체를 이용하여 MOCVD방법에 의해 상압하에서 1$\mu\textrm{m}$의 두께로 증착하였다. 증착된 AIN 박막을 XRD, SEM, RBS 그리고 AES로 분석했으며 IDT전극을 형성하기 위해 1500+ 의 두께로 증착했다. 중심주파수 1.5GHz를 갖고 입출력 개수가 각각 500개이며 IDT선폭이 l$\mu\textrm{m}$인 전송형의 SAW filter를 제작하고자 하였다.
Kim, Dong-Yong;Bae, Gwang-Jin;Kim, Jong-Gu;Ju, Jae-Hun;Jo, Yeong-Rae
Proceedings of the Korean Vacuum Society Conference
/
2015.08a
/
pp.110-110
/
2015
표면에너지는 계면특성을 지배하는 핵심인자로 디스플레이의 터치 스크린 패널 공정, 이종소재의 접합, 금속의 클래딩 등 실제 산업에 있어서 매우 중요하다. 표면에너지는 코팅과 본딩 이론에 있어서 기본이 되는 물리량으로 표면에너지가 높을수록 코팅 또는 박막 증착시 코팅, 증착이 용이하며 이종소재의 접합도 쉽게 일어난다. 본 연구에서는 플라즈마 표면처리시 산소 분율의 변화에 따른 기판의 표면에너지와 코팅층과 기판의 부착력의 변화에 대해 연구하였다. 연구의 주요 기판으로 ITO, PET 기판을 사용하였고, 표면 에너지 변화를 확인하기 위해 기판을 상온 상압 플라즈마에 노출시켰다. 플라즈마는 아르곤(Ar)의 공급량을 20 LPM으로 고정하고 산소($O_2$)의 공급량을 0 sccm에서 40 sccm 까지 10 sccm 간격으로 변수를 주었다. 표면에너지 값은 기판 위에 형성된 액체의 접촉각을 통해 도출하였다. 표면에너지 측정 액체로 증류수(deionized water)와 디오도메탄(diiodo-methane)을 사용하였다. 표면에너지는 산소분압이 10 sccm에서 최대값인 76 mJ/m2으로 증가한 후 20 sccm까지 유지하다 다시 직선적으로 감소하였다. 기판에 증착된 크롬 박막의 부착력은 스크래치 테스트를 통해 측정하였다. 표면에너지의 증가와 비례하게 부착력은 증가하였고 표면에너지가 감소하는 범위에서는 부착력도 감소하였다. 기판과 코팅층의 부착력 증가 원인 중 하나인 계면 산화물 층의 생성 여부를 알아보기 위해 auger electron spectroscopy (AES) 분석을 진행하였다. AES 분석을 통해 플라즈마 표면처리시 기판과 코팅층의 계면 산화물층의 두께가 표면에너지의 변화와 비례하게 증가하였다가 감소하는 것을 확인하였다. 산소분압이 10 sccm 이었을 경우 산화물층의 두께가 가장 두꺼웠다. 또한 계면의 화학적 결합 상태를 알아보기 위해 X-ray photoelectron spectroscopy (XPS) 분석을 진행하였으며 산소 분율의 변화에 따라 크롬 산화물의 양이 증가하였다 감소하는것을 확인하였다. 이 연구를 통해 산소를 포함한 플라즈마 표면개질이 기판과 코팅층의 부착력 증가에 영향을 끼침을 확인 할 수 있었다. 또한 이를 응용하여 부착력 증가가 필요한 다양한 분야에서도 쉽게 적용시킬 수 있을 것이다.
This study was conducted to investigate the effect of different steam condition and dehydration condition on physicochemical characteristics of Olbyeossal made from Waxy rice. All samples were steamed at $95-100^{\circ}C$ for 60 min or at $121^{\circ}C$ for 20 min and then were dehydrated using hot air 45, 60, $80^{\circ}C$ and sun-dried to achieve moisture contents 13-15%. Initial pasting temperature of Olbyeossal was the lower than that of nontreatment sample by parboiling. The combination in steaming $95-100^{\circ}C$ and hot drying at $45-60^{\circ}C$ was showed appropriate pasting properties compared with other condition. The hardness of Olbyeossal was significantly affected by steaming and dehydration condition. The hardness of Olbyeossal showed the higher value for steaming at $121^{\circ}C$ than $95-100^{\circ}C$. The water binding capacity (WBC) and swelling power (SP) were higher steaming at $121^{\circ}C$ than $95-100^{\circ}C$. No significant differences on WBC and SP of Olbyeossal by dehydration condition were observed. As the sensory evaluation results, the combination in steaming at $121^{\circ}C$ and hot-air drying at 45 or $80^{\circ}C$ led to increase preference for appearance, color, taste and overall acceptability. These results indicate that steaming and dehydration condition were affecting factor on physicochemical characteristics of Olbyeossal.
Proceedings of the Korean Vacuum Society Conference
/
2010.08a
/
pp.249-249
/
2010
핵융합로에서는 디버터의 열부하에 대한 안전성을 고려하기 위해 열전도도 및 열 저항성이 높은 텅스텐이 대면 물질로 고려되고 있으며, 경제적인 측면과 실용성 측면에서 텅스텐블록을 직접 제작하여 사용하는 것보다 텅스텐코팅이 효과적이라는 의견이 지배적이다. 또한 ASDEX Upgrade 에서는 탄소블럭에 텅스텐을 코팅하여 챔버 외벽 및 디버터 영역까지 구성하여 캠페인을 진행하였고, 재료적인 측면에서 안정성을 확인 하였다. 따라서 본 연구에서는 디버터 및 챔버외벽 등에 대한 대면물질을 구성하기 위해 상압 열플라즈마 제트를 이용하여 고온에서의 용융 및 냉각을 통해 모재에 텅스텐 피막을 적층하는 과정을 수행하고 있다. 기존의 연구를 통해 일부 공정 변수에 대해서는 이미 적정한 범위의 공정조건을 확보하였고, 기공도와 산화도 및 부착력 등의 물성치에 대한 추가적인 향상을 위해 주요 공정 변수에 집중하여 최적의 조건을 탐색하는 과정이 진행 중이다. 이를 위해 출력증가실험의 일환으로서 기존 36kW급 플라즈마 토치 전력을 한 단계 끌어 올려 48kW급 전력까지 단계적으로 상승시킴으로써 이에 따른 물성치 변화를 검증하고 있다. 현재 44kW 급까지 실험이 수행되었으며, 이를 통해 공극률 감소 및 미세구조 변화에 대한 결과를 얻었다. 실제로 토치의 출력을 증가시킴으로서 텅스텐 피막의 물성치가 변화하는 메커니즘은 플라즈마 제트의 중심부 온도 및 축방향 속도에 의해 결정된다. 중심부 온도가 상승하게 될수록 코팅을 위해 분사되는 분말의 용융률은 증가하지만 분말 외벽에 산화텅스텐이 형성될 가능성은 증가하게 되며, 플라즈마 제트의 모재를 향상 축방향 속도가 증가할수록 용융 된 분말이 모재에 증착 시 형성하는 형태가 원형에 가깝게 되므로 기공이 감소하는 효과가 발생한다. 특히 용융된 분말의 증착 형태는 모재의 온도 및 분말의 입사속도에 결정적이 영향을 받게 되며, 결국 모재와 분말사이의 습윤성에 의한 분말 분산속도가 분말의 입사속도에 버금갈 경우 분말은 모재 위에서 효과적으로 원형으로 전이하며 적층하게 된다. 이러한 전이 현상은 앞에서 언급한 모재의 온도 등에 의해 결정적으로 영향을 받게 되며, 모재의 온도가 전이온도 이하일 경우 폭파형태에서 원형으로 분말의 증착 형태가 전이하게 된다. 이외에 추가적으로 진행하고 있는 연구는 코팅 전처리에 해당하는 분말 효과이며, 특히 탄화텅스텐 분말을 통한 재료적 auto-shroud 효과와 미세분말을 이용한 분말 표면열속의 증가에 따른 용융률 증가효과를 연구에 포함할 계획이다. 이러한 연구는 열적, 그리고 재료적 해석을 바탕으로 해석적 접근을 통해 이루어진다.
Atmospheric-pressure nonthermal corona discharge plasma was applied to the sterilization of biologically contaminated scoria powder. Escherichia coli (E. coli) culture solution was uniformly sprayed throughout the scoria powder for artificial inoculation, which was well mixed to ensure uniformity of the batch. The effect of the key parameters such as discharge power, treatment time, type of gas and electrode distance on the sterilization efficiency was examined and discussed. The experimental results revealed that the plasma treatment was very effective for the sterilization of scoria powder; 5-min treatment at 15 W could sterilize more than 99.9% of E. coli inoculated into the scoria powder. Increasing the discharge power, treatment time or applied voltage led to an improvement in the sterilization efficiency. The effect of type of gas on the sterilization efficiency was in order of oxygen, synthetic air (20% oxygen) and nitrogen from high to low. The inactivation of E. coli under the influence of corona discharge plasma can be explained by cell membrane erosion or etching resulting from UV and reactive oxidizing species (oxygen radical, OH radical, ozone, etc.), and the destruction of E. coli cell membrane by the physical action of numerous corona streamers.
It is unable to derive the standard emf ($E^{\circ}$) of the cell at high pressure from the conventional method. However, when the concept of the complete equilibrium constant($K{\circ})$) is available to the conventional Nernst equation, it is possible to get the standard emf of the cell at high pressure(complete Nernst equation). Moreover, the other thermodynamic properties, such as the net change of solvation number(k), the compressibility of solvent(${\beta}$), ionization constant(K), the standard free energy change(${\Delta}G^{\circ}$), the standard enthalpy change(${\Delta}H^{\circ}$) and the standard entropy change (${\Delta}S^{\circ}$) of the cell reaction at equilibrium state have been also obtained. In this experiment, the emf of the cell; 12.5 % Cd(Hg)│$CdSO_4(3.105{\times}10^{-3}M),\;Hg_2SO_4│Hg$ have bee measured at temperature from 20 to $35^{\circ}C$ and at pressures from 1 to 2500 atms. The emf of the cell increased with increasing pressure at constant temperature, and did with increasing temperature at constant pressure. The net change of solvation number(k) of the cell reaction was 41.96 at $25^{\circ}C$, and kept constant value with pressure, while, K and ${\Delta}S^{\circ}$ increased with pressure, but whereas ${\Delta}G^{\circ}$ and ${\Delta}H^{\circ}$ decreased. Since the standard emf of the cell at high pressure can be calculated from the complete Nernst equation, the theory of chemical equilibrium could be developed with at high pressure as well as at the atmosphere.
부수게는 찹쌀이 주원료인데 찹쌀의 수침은 다른 가공공정에서 볼 수 없는 장시간 수침을 실시함으로써 이 기간 동안 유기산의 생성을 유도하여 팽화도에 마이너스 영향을 주는 $Ca^{2+}$과 $Mg^{2+}$을 용출시켜 부수게의 팽화력증가를 유도하여 온 특이한 공정으로 이는 부수게 제조공정에서 미생물의 작용을 활용하여 온슬기를 엿볼 수 있다. 또 한가지 특징은 대두의 첨가는 단백질 함량을 증가시키는 의미도 있으나 찹쌀가루를 찔 때 대두에서 유래한 armylase가 전분에 작용하여 건조된 부수게 반대기의 결정화도을 낮게하여 건조 취급중 균열발생을 감소시키는 효과와 찧을 때 점성이 감소하는 효과가 있는 것으로 판단된다. 부수게 제조시 대두를 첨가하는 것은 영양성, 기능성에서 볼 때 우리가 창출한 쌀과 대두의 조화적 이용의 한예가 된다. 부수게는 우리가 흔히 먹고 있는 밥, 떡 죽처럼 상압에서 가수해서 호화한 것이 아니라 호화후 고온(170$^{\circ}C$)에서 팽화하여 다공성구조를 형성시키므로써 밥이나 떡에서 전혀 느낄수 없는 crunchy type의 snack성을 가지는 과자로써의 특성을 가지고 있다. 그 제조공정은 12단계 이상으로 복잡하며 제조원리면에서 볼 때 물리적, 화학적 그리고 미생물학적인 공정이 조화적으로 활용되어 만들어지고 있기 때문에 재현성이 낮은 어려움이 있기도 하다. 대량생산을 위해서는 적합한 기계화와 자동화공정이 선결되어야 하는 데 떡의 높은 점성이 기계화와 자동화에 큰 제한요인으로 남아 있고, 또한 부수게 반대기를 건조하는 동안 반대기의 균열(cracking)을 효과적으로 방지 할 수 있는 건조조건과 방법에 대한 연구가 남아 있다.
Journal of the Korea Academia-Industrial cooperation Society
/
v.18
no.3
/
pp.562-568
/
2017
A precast floating slab track with a 5m slab panel and installed with isolators is proposed to solve the noise and vibration problem at existing elevated railway stations. Thus, the construction can be carried out rapidly without interrupting the train operation. However, dynamic instability problems may be caused by repeated discontinuities in track due to the short slab panel length and excessive rail displacement due to the inherent operation mechanism of a floating system in reducing the vibration. Furthermore, the difference of the supporting stiffness at the transition between the floating track and ballast track may raise problems. In this study, the assessment factors to evaluate the dynamic stability of the precast floating slab track are presented and assessed with the vehicle-track interaction analysis. Through the analysis, all values relevant to the stability at the floating track section are found to be acceptable, and the slab panels at the transition section are designed to satisfy the stability.
Park, Hong-Hyun;Kim, Sung-Kon;Pyun, Yu-Ryang;Lee, Shin-Young
Korean Journal of Food Science and Technology
/
v.21
no.6
/
pp.815-819
/
1989
Rheological properties of chestnut starch suspensions (3 and 4%, db) and gelatinized starch (4%, db) were investigated with a capillary and rotational viscometer, respectively. Starch suspensions had no yield stress and showed dilatant flow behavior in the temperature ranges of $30-65^{\circ}C$. However, starch suspension showed pseudoplastic flow behavior at $70^{\circ}C\; and\;above\; 65^{\circ}C$ for 3 and 4% concentration, respectively Flow activation energy below $50^{\circ}C$ was 0.56 kcal/mole but increased to 51.9-80.8 kcal/mole at $60-70^{\circ}C$. The behavior of gelatinized starch (4%) was pseudoplastic regardless of heating temperature $(65-80^{\circ}C)$ and time (15-60 min). The apparent viscosity of the starch remained constant after heating at $80^{\circ}C$ for 45 min. The swelling power and log apparent viscosity showed similar pattern. The activation energy of the apparent viscosity of the geletinized starch at $70-80^{\circ}C$ was 13.09kcal/mole. The apparent viscosity of thermal-gelatinized $(90^{\circ}C)$ starch was lower than that of 15 psi-gelatinized starch.
Sodium dodecanoyl-4-oxybenzenesulfonate (DOBS) salt is a substance that exhibits effective bleaching and antimicrobial abilities at low temperatures. A mild and efficient synthesis method of DOBS starting from dodecanoyl chloride and sodium 4-hydroxybenzene sulfonate was investigated under alkaline conditions using a water (W)-polar aprotic solvent system. First, the reaction was carried out using only water as a solvent system with the variables of temperature and time. The yield was found to be as low as about 5% in most cases under the reaction conditions of more than 30 ℃ and 1 h. In order to develop an efficient solvent system, the effect on the yield of DOBS was evaluated in various solvent systems which were prepared by changing the type of polar aprotic solvents while mixing them with the water. A solvent system in which acetone (AC) and water were mixed showed the best yield and about 82 % under mild reaction conditions (30 ℃, 1 h and atmospheric pressure) was obtained. The prepared DOBS showed good bleaching and antimicrobial activities indicating that it could be used an excellent bleach activator.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.