• Journal of environmental and Sanitary engineering
• /
• v.15 no.3
• /
• pp.88-93
• /
• 2000

The objective of this study was to depict the kinetic behavior of the platinum catalyst for the deep oxidation of VOCs and their mixture. The oxidation characteristics of VOCs, which were benzene, toluene, and styrene, was studies on a 0.5% $Pt/{\gamma}-Al_2O_3$ catalyst. The reactivity increases in order benzene>toluene>styrene. In mixtures, remarkable effects on reaction rate and selectivity have been evident ; the strongest inhibiting effect was shown by styrene and increases in a reverse order with respect to that of reactivity. The reaction model reveals that there is a competition between the two reactants for the oxidized catalyst. Thus, the nontoxic catalytic oxidation process was suggested as the new VOCs control technology.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.547-555
• /
• 2018

In addition to North America and Europe, Korea is also responding to the toxic damage caused by the production and distribution of chemicals. Methods for assessing bio-toxicity of harmful substances have been widely introduced, but it is required of quantitative and speedy information for modeling. For 6 heavy metals, as zinc, copper, chrome, cadmium, mercury and lead, bio-toxicity assessment and kinetics model were constructed using Vibrio fischeri which is widely used luminous bacteria. The degree of luminescence activity and the toxicity of heavy metals were relative limunescence unit, RLU measured as by using a photomultiplier embedded device. The toxicity was assessed by the concentration levels giving under 20% lethality and lethal concentration, $EC_{50}$. In the results, the toxicity order were followed from mercury, lead, copper, chrome, zinc and cadmium. $EC_{{50},{\infty}}$ obtained by trends of $EC_{50}$ by time follows had highly linear agreement with main parameters of bio-toxicity modelling. The average error rates of the reproduced lethality obtained from DAM and TDM model on the basis of body residue, were 10.2% for mercury, lead, copper, chrome and 20.0 for the all 6 methals.

• Korean journal of applied entomology
• /
• v.35 no.3
• /
• pp.232-237
• /
• 1996

Toxicity of 5 acaricides, 4 insecticides. and 6 fungicides to the twospotted spider mite, Tetranychus urticae Koch, and its predator Amblyseius womersleyi Schicha was assessed in a laboratory using a leaf disk bioassay. Dicofol was equally very toxic to aduly females of T. urticae and A. womersleyi, and caused 46% and 40% mortality of eggs of those two species, respectively. Adult females of A. womersleyi dipped in Abamectin solution showed low mortality(16.6%), while all T. urticae females died within 24 hours after dipping. Three ovicidal acaricides (Tetradifon, Clofentezine, and Hexythiazox) showed no mortality of predator eggs, but more than 90% mortality of T. urticae eggs. Four insecticides (Teflubenzuron, Triflumuron, Diflubenzuron, and Imidacloprid) and three fungicides (Propineb, Fenarimol, and Polyoxin-B captan) were non toxic to the A. womersleyi adult females. The other fungicides (Chlorothalonil, Nuarimol.Mancozeb, and Folpet) were a little toxic to adult females of the predator, showing$\leq$23.3% mortality, It may be suggested from these results that 4 insecticides, 4 acaricides, and 6 fungicides described could be incorporated into the integrated pest management system with A. womersleyi in apple orchard.

• Clean Technology
• /
• v.17 no.3
• /
• pp.273-279
• /
• 2011

The physicochemical properties of manufactured nanomaterials can vary depending upon the methods of manufacture, although the utilized raw materials are same. Hence, the toxicity can also vary based on the methods of nanomaterials manufacture. In this study, we compared the toxicity effect of two types of CNTs (MWCNT, multi-walled carbon nanotube; SWCNT, single-walled carbon nanotube) that differ in length and wall number. In case of MWCNTs, inflammatory responses were more strongly induced in longer groups, whereas body weights more clearly decreased in shorter groups. SWCNT significantly decreased the relative weights of brain and kidney, and the inflow of immune cells and the hematological changes were observed significantly on day 1 and day 7 after exposure, respectively. Our results showed that the length and wall number of CNTs can serve as critical factors in the exhibited inflammation and toxicity.

• 대한예방의학회:학술대회논문집
• /
• 1995.10a
• /
• pp.309-310
• /
• 1995

• 월간산업보건
• /
• s.383
• /
• pp.9-12
• /
• 2020

눈과 호흡기의 자극 가능성을 최소화하기 위해 오염화인(Phosphorus pentachloride)에 대한 직업적 노출기준인 TLV-TWA를 0.1ppm(0.85 mg/㎥)으로 권고하였다. 동물 또는 사람의 오염화인 노출에 대한 독성자료는 매우 제한적이며, 삼염화인(Phosphorus trichloride)과 유사하게 물이나 상대습도가 높은 공기 중에서 염산(Hydrogen chloride)과 인산(Phosphoric acid)으로 가수분해된다. 따라서 삼염화인, 염산 그리고 인산에 대한 TLV Documentation을 참조해야 한다. 피부 흡수(Skin), 감작제(SEN), 발암성 표기에 대한 경고주석과 TLV-STEL을 권고하기에는 유용한 자료가 부족하다.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.12
• /
• pp.828-834
• /
• 2012

The ecotoxicity detection device for preliminary test (Test jig) was manufactured to develop the biological early warning system using Vibrio fischeri. In this study, the ecotoxicity detection charateristics of the Test jig was investigated for 6 heavy metals (Cr, Zn, Pb, Cd, Cu and Hg). It was observed that relative luminescence unit (RLU) of Vibrio fischeri constantly decreased by the concentrations of the tested heavy metals. In contrast with other heavy metals, RLUs of Pb and Hg constantly decreased even at low concentrations. RLU of Hg drastically decreased when its concentration increased from 0.13 mg/L to 0.25 mg/L. $EC_{50}$ values of Cr, Zn, Pb and Cd gradually decreased with exposure time, whereas there was no significant change in $EC_{50}$ values of Cu and Hg with time. On the other hand, $EC_{50}$ values between the Test jig and Reference device were compared to evaluate the ecotoxicity detection performance of the Test jig. No big difference was found in $EC_{50}$ vlaues between the two devices, indicating that the Test jig could be applied as the ecotoxicity detection device for heavy metals.

• Korean Journal of Food Science and Technology
• /
• v.50 no.6
• /
• pp.629-635
• /
• 2018

In this study, the safety aspect of Maesil-cheongs with reduced amygdalin levels was investigated in terms of toxicokinetics and repeated oral toxicity. Plasma or UVC treatment was utilized to obtain Maesil-cheongs with reduced amygdalin levels. The toxicokinetic study demonstrated that the oral absorption of amygdalin decreased remarkably after a single-dose oral administration of both plasma- and UVC-treated Maesil-cheongs. The fourteen-day repeated oral toxicity study revealed that plasma- or UVC-treated Maesil-cheongs did not cause changes in body weight, food intake, water consumption, and absolute and relative organ weights. No significant effects on hematological and serum biochemical parameters were found. Histopathological examination showed no abnormality or toxicological change. These findings suggest that plasma- and UVC-treated Maesil-cheongs have no toxicity potential, and these processes will be useful to obtain products with safe, reduced amygdalin levels.

• Korean Journal of Environmental Biology
• /
• v.41 no.3
• /
• pp.256-265
• /
• 2023

Chlorothalonil is continuously introduced into the marine environment and has significant toxic effects on various marine organisms, however, research on its effect on seaweed is limited. Therefore, we analyzed the impact of chlorothalonil on the early life stages of major aquaculture species in Korea, Undaria pinnatifida. U. pinnatifida female gametophytes were exposed to different concentrations of chlorothalonil (0, 0.03, 0.05, 0.10, 0.20, and 0.40 mg L^-1), and their survival rate and relative growth rate were analyzed. The no observed effect concentration (NOEC), lowest observed effect concentration (LOEC), and median lethal concentration (LC50) for female gametophyte survival were determined as 0.05, 0.10, and 0.141(0.121-0.166)mg L^-1. NOEC, LOEC, and median effective concentration (EC50) for relative growth rate were 0.10, 0.20, and 0.124 (0.119-0.131) mg L^-1. Therefore, female gametophytes of U. pinnatifida are expected to experience toxic effects at concentrations above 0.05-0.10 mg L^-1 of chlorothalonil. These research findings are anticipated to serve as crucial reference data for evaluating the effects of chlorothalonil on the health of U. pinnatifida in the early life stages.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.189-189
• /
• 2011

인공관절은 노인성 질환이나 자가 면역질환, 신체적인 외상 등으로 인하여 발생하는 관절의 손상 부위를 대체하기 위해 고안된 관절의 인공 대용물이다. 인공 관절 중 인공 고관절의 경우 관절 운동을 하는 라이너(Liner)와 헤드(Head) 부분이 인공관절의 수명을 결정하게 되는데, 헤드 부분에 메탈소재와 라이너 부분에 고분자 소재를 사용하는 MOP (metal on polymer) 구조의 인공관절은 충격흡수의 장점이 있는 반면 wear debris에 의한 골용해로 인하여 관절이 느슨해지는 문제점이 발생하여 재 시술의 주요 원인이 되고 있다. 또한 메탈 헤드의 마모로 인한 금속이온의 용출은 세포 독성의 문제를 야기하여 인공관절의 수명을 낮추는 또 하나의 요인이 되고 있다. 따라서 인공관절의 수명을 늘리기 위해 DLC, ZrO, TiN 등의 높은 경도 값을 갖는 박막을 금속 헤드 위에 증착하여 상대재인 인공관절용 고분자 소재의 마모량을 줄이고자 하는 연구가 활발하게 진행 되고 있다. 본 연구에서는 PIII&D (Plasma Immersion Ion Implantation & Deposition)공정을 이용하여 Co-Cr-Mo 합금 소재 niobium nitride (NbN) 박막을 증착하여 상대제인 UHMWPE (ultra high molecular polyethylene)의 마모를 줄이고자 하는 연구를 진행하였다. 마모량을 감소시키기 위하여, 박막 증착전에 질소를 이온주입하는 pre-ion implantation 공정을 도입하였으며, 또한 Co-Cr 합금과 NbN박막 사이의 접착력을 증가시키기 위하여 박막의 증착 초기에 이온주입과 증착을 동시에 수행하는 dynamic ion mixing공정을 수행하였다. NbN 박막의 특성을 평가하기 위해 XRD, XPS, AFM 등의 분석을 수행하였으며, 상대재인 초고분자량 폴리에틸렌의 마모량을 측정하기 위해 Pin-on-disk tester를 이용하여 마모 실험을 진행하였다. 마모 실험 결과, pre-ion implantation 공정을 도입한 경우 현재 상용화 되어있는 Co-Cr 합금에 비하여 마모량을 2배 이상 감소시키는 것을 확인 할 수 있었으며, dynamic ion mixing 공정을 도입한 경우 장시간의 마모 시험에 대한 마모 특성이 향상 되는 것을 확인 할 수 있었다.