• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06d
• /
• pp.13-17
• /
• 1998

집속음장이 고조파성분을 이용한 초음파영상의 특성을 해석하는 초기단계로서 음축에 수직하게 놓인 강체판의 직선 edge가 집속 가우스빔을 회절시킨다고 가정하고, edge의 전후에서 발생하는 제 2고조파를 고려해서 회절음장을 해석하였다. 계산에서는 그린함수의 간단화를 위해 , Fresnel 근사를 이용하였고 실험에서는 성형전극을 형성시킨 요면 압전진동자에 의한 1.9MHz 집속가우스음원에 의해 만들어지는 초음파 빔에 수직하게 edge을 삽입시켰다. 회절 edge 후방에서 음장을 관측한 결과, 제 2고조파의 빔형상을 제외하고는 계산치와 실험치가 잘 일치하고 있다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.285-288
• /
• 2000

본 논문은 시간영역에서 희소어레이의 패턴을 원하는 패턴과 실제 희소어레이의 패턴간의 오차의 계수적 자승치를 Taylor 급수 근사와 미세탐색을 이용하여 최소화하여 빔패턴을 최적화하는 방법을 제시한다. 센서의 간격이 어레이 중심에 관하여 비대칭인 경우에 대하여 어레이 공간의 주어진 영역의 오차함수에 성능 향상을 위하여 계수를 적용한다. 미세탐색을 이용함으로써 계수 최소 방법의 성능이 주 빔 부근의 측면롭에 관련하여 향상되는 것이 판명되었다.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.415-420
• /
• 2005

LMTT (Linear Motor-based Transfer Technology) is the horizontal transfer system for yard automation, which has been proposed to take the place of AGV (Automated Guided Vehicle) in the maritime container terminal. The system is based on PMLSM (Permanent Magnetic Linear Synchronous Motor) that consists of stator modules on the rail and shuttle car. It is desirable to reduce the weight of LMTT in order to control the electronic devices with minimum energy. In this research, structural optimization for a mover of shuttle car is performed to minimize the weight satisfying design criteria. The objective function is set up as weight. On the contrary, the design variables are transverse, longitudinal and wheel beams' thicknesses and its height, and the constraints are considered as strength and stiffness.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.347-358
• /
• 2021

The objective of this study is to optimize the shape of doubly curved surface where a conformal array is equipped. That surface is modeled with a double-ellipsoid solid controlled by four parameters. By analyzing the performance of the conformal array beams with the beam pattern synthesis, two design parameters are determined. Then, we define the weighted object function which is formulated as the sum of sharp indexes for directivity index, the elevation resolution, and the bearing resolution. The direct calculation on all grids is used to evaluate the weighted object function and seek the optimal value of two design parameters when the weightings are given. In the simulation, four kinds of weighting cases are respectively applied to evaluate the weighted object function. The optimal shapes of double-ellipsoid solid are shown in each case. Especially, when the uniform weightings are used, the double-ellipsoid solid with more smooth surface is obtained.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.1
• /
• pp.25-31
• /
• 1999

This paper proposes a new wide-band beamforming algorithm which has Gaussian weighting at nested linear array for acoustic measurement. The beamforming is performed one-shot by using all sensors simultaneously, not octave-by-octave. Gaussian weighting of frequency-dependent function is applied to each sensor before time-delay compensation so as to control the frequency receiving band of each sensor. As the results of the simulations, it is confirmed that the proposed algorithm can form the one-shot beams having uniform directivity index and also it can be applied to the broad-band acoustic measurement.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.6
• /
• pp.637-646
• /
• 2022

Sub-arrays of arbitrary conformal array have different geometric shape through steering direction, thus the beam patterns of sub-arrays are always non-uniform. In this paper, we apply the beam pattern synthesis method using convex optimization into the conformal array, and shows the improvement of uniformity of beam performance. The simulation is performed with the conformal array of cut-sphere shape. As a result, the standard deviation of 3 dB beamwidth in elevation is greatly reduced but the directivity index is also reduced. To alleviate this trade-off, we propose a convex optimization using a shading function.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.5
• /
• pp.332-339
• /
• 2012

Beamspace transform algorithm transforms spatial-domain data - such as x, y, z dimension - into incidence-angle-domain data, which is called beamspace-domain data. The beamspace transform method is generally used in source localization and tracking, and adaptive beamforming problem. When the beamspace transform method is used in multichannel audio source separation, the inverse beamspace transform is also important because the source image have to be reconstructed. This paper studies the beamspace transform and inverse transform algorithms for multichannel audio source separation system, especially for the beamspace-domain multichannel NMF algorithm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.3
• /
• pp.535-544
• /
• 2023

In this paper, we study the effect of gradient vector calculation method(analytical method, central finite difference method) on adaptive beamforming to control weight distribution during iterated calculation when LMS algorithm (repeating method) is used to realize desired beam pattern. To this end, a quasi-ideal beam having an arbitrarily set beam width, a rotating beam, and a multi-beam were reviewed as examples. Numerical experiments applied the step parameters of the appropriate values to the adaptive beamforming system through trial and error equally to the two calculations, and compared the convergence characteristics of objective functions that evaluate adaptability and error using two methods for calculating gradient vectors.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.3
• /
• pp.141-147
• /
• 2019

In this paper, a systematic beam splitter design for multi-beam forming is proposed. The objective of this research is to a design beam splitter that splits and focuses scattering microwaves into intense beams in multiple directions. It is difficult to split multi-beam to non-specific directions with theoretical approaches. Therefore, instead of using transformation optics(TO), which is a widely used process for controlling electromagnetic wave propagation, we used a systematic design process called the phase field design method to obtain an optimal topological structure of beam splitter. The objective function is to maximize the norm of electric field of the target areas of each direction. To avoid island structure and obtain the structure in one body, volume constraint is added to the optimization problem by using augmented Lagrangian. Target frequency is set to X-band 10GHz. The optimal beam splitter performed well in multi-beam forming and the transported electric energy of target areas improved. A frequency dependency test was conducted in the X-band to determine effective frequency range.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.712-712
• /
• 2014

본 논문에서는 지연-가중-합 빔형성 방법이 적용된 지향성 헤드폰의 마이크로폰 배치 설계를 설명한다. 마이크로폰의 갯수, 마이크로폰 간의 간격 등이 헤드폰 지향성에 영향을 미치는 설계 변수가 된다. 본 논문에서는 현실성을 고려하여 4개 이하의 마이크로폰을 포함한 10cm 길이의 배열을 타겟으로 한다. 전방으로부터의 소리를 증폭하고 후방으로부터의 소리를 감쇠하여, 전-후방 음압차를 최대화하는 것을 목표로 하였다. 구형 머리전달 함수를 이용한 시뮬레이션을 통해 최적의 마이크로폰 배치를 결정하였다. 설계된 헤드폰은 3개의 마이크로폰을 이용하여 300~3000Hz의 주파수 대역에서 평균 34.6dB의 전-후방 음압차를 보였다. 이 결과는 선행 연구에서 수행된 지연-합 빔형성 방법을 이용한 결과에 비해 8.8dB 뛰어난 성능이다.