• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.238-239
• /
• 2000

페이지 지향 데이터의 고밀도 홀로그래픽 데이터 저장 시스템이나 홀로그래피 현상에서 필름에 기록되는 스펙트럼을 평탄화하기 위해 확산 광원의 사용은 필수적이다. 또한, 출력 평면에서 균일한 분포를 갖는 회절 빔의 세기 분포와 회절 격자로서의 높은 회절 효율, 홀로그램 손상 시 재생 가능한 용장성 (redundancy)의 증가를 위해 간유리나 특정 패턴들로 인코딩된 유사 랜덤 디퓨저가 이용되고 있으나, 이들은 무한한 공간 대역폭을 갖기 때문에 공간적으로 유한한 데이터 마스크만이 이용되거나 기록 매질이 임의의 크기로 제한된다면, 입사 광원의 전력 낭비와 균일도 측면에서 비효율적이고, 여러 단계의 제작과정이 필요한 단점을 가지고 있다.$^{(1-3)}$ (중략)

• Korean Journal of Optics and Photonics
• /
• v.17 no.4
• /
• pp.323-328
• /
• 2006

A fundamental problem in digital holography is the presence of zero-order noise in the reconstruction process, which decreases the signal to noise ratio(SNR). For many applications, that reduction of SNR makes digital holography impractical, so a great number of approaches have been tested in order to overcome such a problem. In this paper we use the scanning method to suppress the zero-order diffraction noise and the interference noise between object beams. We demonstrate that it is possible to increase the image quality with the scanning method.

• Korean Journal of Optics and Photonics
• /
• v.11 no.1
• /
• pp.47-57
• /
• 2000

A two-stage iterative Fourier transform algorithm, based on hybrid input-output algorithm and new Pnoise algorithm, is used to design continuous and quantized phase-only diffractive pattern elements which produce arbitrary given intensity patterns via Fraunhofer diffraction. Numerical results for two $128\times128$ binary patterns and two grayscale patterns are compared with those of other algorithms. It is found that the algorithm yields better signal-to-noise ratio and even better uniformity with slightly lower diffraction efficiency than other algorithms. We investigated the dependence of performance on parameters used in the algorithm, size of noise region, and the number of phase levels for quantized elements. In the case of quantized phase elements, the size of noise region plays a greater role in determining the performance of the algorithm than given intensity pattern itself. tself.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.6
• /
• pp.349-356
• /
• 2013

The purpose of this study is to review and overcome the limits of the existing design wave model applied to such waters as those located inside bays or near islands where the impact of wind influenced waves are more dominant, due to the nature of topographic isolation, than the influence of direct waves coming from the open sea. Although the existing model for an inside bay design wave is excellent for considering wind factors and very adaptable to topographically complicated areas compared to other models, it is difficult to show the wave diffractions and reflections caused by large scale structures or topographic features in the region. The study examined the various methods capable of taking into account wave diffraction, the angle of wave reflection, and changes in water depth. As a result of applying the modified design wave model to the target situation (inside bay or near island areas), it was found that the reliability of the design wave height around marine structures was improved, compared to the existing models. Therefore, it is fair to predict that the new model could provide more accurate design waves in the design of marine structures.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.4
• /
• pp.227-239
• /
• 2021

A practical and effective method of X-ray powder diffraction analysis was investigated for quantitative analysis of the mineral content of natural samples. Sample mounting experiments were conducted to select the best randomly oriented powder sample mount. A comparative experiment was also made between a reference intensity ratio (RIR) method, which compares a single peak intensity with standard material, and the Rietveld method, which calculates a full X-ray diffraction pattern, to search for the effective method of mineral quantification. In addition, samples containing amorphous minerals were quantitatively analyzed by the Rietveld method and the efficiency was reviewed. As a result of the study, the optimal random orientation could be reached by the side mounting method. The Rietveld method using the full pattern of X-ray diffraction was more suitable for mineral quantitative analysis, rather than the RIR method using a specific peak. However, either method could depend on the analyst's experience in addition to analytical technique. Moreover, amorphous minerals can be quantitatively analyzed by the Rietveld method, and the analysis results make the geological analysis possible.

• Analytical Science and Technology
• /
• v.5 no.1
• /
• pp.111-114
• /
• 1992

Ordering phenomena were observed for Zn and Ta cations of $Ba(Zn_{1/3}Ta_{2/3})O_3$ under particular heat treatments, followed by a considerable lattice distortion. This lattice distortion was measured by X-ray powder diffraction with a precision of higher than 1/10,000. From this investigation, a significant lattice distortion occurred within 30 min. of sintering at $1350^{\circ}C$, and it was increased with sintering time.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.183-183
• /
• 2010

본 연구에서는 기존의 투명전도박막(ITO) 재료인 Sn 성분을 Zn로 치환하여, Zn의 성분함량 변 화에 따른 투명전도박막의 특성을 조사하기 위하여, Zn이 100% 치환된 $In_2O_{3(90wt%)}-ZnO_(10wt%)$ (IZO) 그리고 Zn이 3 %와 7 % 치환된 $In_2O_{3(90wt%)}-ZnO_{(3wt%)}-SnO_{2(7wt%)}$, $In_2O_{3(90wt%)}-ZnO_{(7wt%)}-SnO_{2(3wt%)}$ (IZTO) 등의 타겟을 제작하여 RF-magnetron sputtering 법으로 투명전도박막을 성장하였다. 각각의 박막에 대해서 전기적 특성조사와 가시광선영역에서의 광투과도 특성, 성막 특성, 그리고 구조적 특성을 조사하였다. Sn이 100% Zn으로 치환된 IZO 박막의 경우 조성 성분비가 90 : 10 wt.%에서 비저항 값이 $5.2{\times}10^{-4}\;{\Omega}cm$ 정도로 전기전도성이 매우 우수한 것으로 나타났으며, 또한 X-ray 회절패턴 분석결과 성분비에 관계없이 비정질구조임을 확인 하였다. Sn이 일부 Zn으로 치환된 IZTO 박막의 경우 성분비가 90(In) : 7(Zn) : 3(Sn) wt%의 경우 비저항 값은 $6.5{\times}10^{-4}\;{\Omega}cm$ 정도로 우수한 것으로 나타났으며, X-ray 회절패턴 분석결과 비정질 구조임을 확인하였다. 광학적 특성으로는 가시광선영역(400~780nm)에서 IZO, IZTO 박막은 85% 이상의 매우 우수한 투과율을 나타내었다.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.90-101
• /
• 1997

A hybrid element method is presented for two-dimensional diffraction problem of water waves. In this method, only a limited fluid domain close to irregular bodies is discretized into conventional finite elements, while the remaining infinite domain is treated as one element with analytical representations of high accuracy. A finite element grid is automatically generated by using Dealunay triangulation based on the Bowyer's algorithm and a linear system of equations is approximately solved with the ILU-CGS algorithm. To validate the present scheme, Computational results are compared with the existing experimental data and other numerical solutions.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.244-245
• /
• 2003

광굴절 유기 고분자 재료는 1991년 IBM연구소에서 광굴절 효과를 나타내는 고분자 기억소자로의 기능성을 타진한 후에 광굴절 무기 결정에 비해 높은 회절효율의 가능성, 도핑의 용이성, 저렴한 생산비용, 다양한 응용성 등으로 많은 연구가 이루어지고 있다. 본 실험에서는 광전도 고분자(Charge transporting molecule)인 SGC와 비선형 광학색소(NLO)인 SGM, Tg를 낮추기위한 가소제인 PEG, 전하 발생체(Photocharge generator, Sensitiser)로 이루어진 (SGC：SGM：PEG：TNF＝30：60：9：1) 광굴절 고분자 복합재료의 특성을 분석하였다. (중략)

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4
• /
• pp.67-71
• /
• 1998

초음파 선형트랜스듀서에서 제한회절음장은 영상깊이에서 다른 방향으로 진행하는 평면파들의 선형적인 중첩으로부터 구한다. 제한회절음장을 구현하기 위한 송신음장은 영상 깊이를 지나가는 평면파들의 공간적인 확장으로부터 구해지는데 실제의 하드웨어로 구현하 기 어렵다. 본 논문은 진행방향이 다른 pulsed mode 평면파를 각각 송신한 후, 얻어진 데이 터로부터 합성집속 방법에 의하여 제한회절빔을 구현하였다. 제안한 방법은 모든 송신소자 에서 발사되는 음장의 크기가 동일하므로 송신전력이 증가하여 신호대잡음비와 명암비를 증 가시키며 간단한 하드웨어로 구현이 가능하다. 시뮬레이션 결과는 송신은 한점집속, 수신은 동적집속을 사용하는 기존의 방법과 비교하여 주엽(mainlobe)의 폭과 부엽(sidelobe)의 크기 관점에서 우수함을 증명하였다.