• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1300-1310
• /
• 2003

In this paper, the performance of a multicarrier CDMA system using adaptive modulation and adaptive subchannel allocation scheme is analyzed in Rayleigh fading channel. The proposed adaptive modulator consists of modulation schemes using QPSK 16 QAM, 64 QAM and 256 QAM and constellations are pointed by Gray code. In addition, the threshold of the analysis is average E$\_$b//N$\_$o/ when the BER is 1 %. In the multicarrier system with adaptive subchannel allocation scheme, each DS waveform of user is transmitted over the K subchannels with the biggest fading among L subchannels. In case of the proposed system, total 4 subchannels are used and data are transmitted over 2 subchannels with the biggest fading, which results in the threshold of each channels is 5.2 dB, 9 dB, 13.2 dB and 8.4 dB, 12.2 dB, 16.3 dB. In the case of proposed system, the BER of 10$\^$-3/ is satisfied if average E$\_$b//N$\_$o/ is 8.1 dB. This is increased performance of 12.9 dB in comparison with conventional system. The BPS according to average channel is needed average E$\_$b//N$\_$o/ of about 15 dB in 7 bit. In the case of subchannel error, the BER of 10$\^$-3/ is 13.6 dB and is declined about 5.5 dB.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.363-371
• /
• 2013

This paper describes a multi-standard LDPC decoder which supports 19 block lengths(576~2304) and 6 code rates(1/2, 2/3A, 2/3B, 3/4A, 3/4B, 5/6) of IEEE 802.16e mobile WiMAX standard and 3 block lengths(648, 1296, 1944) and 4 code rates(1/2, 2/3, 3/4, 5/6) of IEEE 802.11n WLAN standard. To minimize hardware complexity, it adopts a block-serial (partially parallel) architecture based on the layered decoding scheme. A DFU(decoding function unit) based on sign-magnitude arithmetic is used for hardware reduction. The designed LDPC decoder is verified by FPGA implementation, and synthesized with a 0.13-${\mu}m$ CMOS cell library. It has 312,000 gates and 70,000 bits RAM. The estimated throughput is about 79~210 Mbps at 100 MHz@1.8v.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.10-17
• /
• 2015

A satellite communication system is one of viable solutions for Internet applications running in wide areas. However, the performance of TCP can be seriously degraded in the satellite networks due to long round-trip time (RTT) and high bit error rate (BER) over satellite links. Therefore, a performance enhancing proxy(PEP) based TCP splitting connection scheme is used in the satellite link to improve the TCP performance. In this paper, we implement PEP testbed and conduct experiment to evaluate the performance of TCP splitting connection by comparing with high-speed TCP solutions in various environments. In our experimental environment, we consider multiple connections, high packet loss, and limited bandwidth. The experiment results show that PEP improves the TCP throughput than high-speed TCP variants in various environments. However, there is no improvement of the TCP throughput with the limited bandwidth because there is packet loss caused by both the congestion and the channel error.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.91-97
• /
• 2018

This paper presents implementation possibilities of digital IoT doorlock systems via VLC(Visible Light Communication)'s color grid. The color grid-based VLC modulation scheme which are discussed in this paper utilize the straightness of light and abundant frequency resources which are the properties of the light. Performance results in this paper are compared to that of conventional modulations with Bit Error Rate (BER) and Signal to Noise Ratio (SNR) simulations. With respect to a channel model, the proposed modulation schemes select the nearest Line Of Sight (LOS) except Non Line Of Sight (NLOS). Experiments in this paper show error rates of received symbols by changing power dB at a distance of 3m between Tx and Rx in an indoor environment. Through performance results and experiments, this paper demonstrates superiority of the proposed color grid-based modulation schemes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4125-4130
• /
• 2015

This paper presents the communication performance for the radiation pattern reconfigurable antenna in the wearable device measuring bio signal (temperature, blood pressure, pulse etc.) of human body. The operational frequency is 2.4 - 2.5 GHz, which covers Bluetooth communication bandwidth. The maximum gain of the antennas is 1.96 dBi. The proposed antenna is efficiently transmitting and receiving signal by generating two opposite beam directions using two RF switches (PIN diode). Also, we investigated how radiation pattern changes according to three angles ($30^{\circ}$, $90^{\circ}$, $150^{\circ}$) of Top Loading. In this paper, we measured and compared the SNR (Signal-to-Noise Ratio) and BER (Bit Error Rate) performances of the proposed antennas in the condition between an ideal environment of anechoic chamber and smart house existing practical electromagnetic interferences (Universal Software Radio Peripheral, USRP). Throughout the comparing the results of the measurement of two cases, we found that the SNR is degraded over 5dB in average and BER is increased over ten times in maximum, therefore, it is confirmed that the error rate of receiving signal is increased. The measured results of SNR and BER value in this paper able to expect the performance degrading by the interference from the electromagnetic devices.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.59-67
• /
• 2006

OFDM (Orthogonal frequency Division Multiplexing) systems convert serial data stream to N parallel data streams and modulate them to N orthogonal subcarriers. Thus spectrum utilization efficiency of the OFDM systems are high and high-speed data transmission is possible. However, with the OFDM systems using the same modulation method at all subcarriers, the error probability is dominated by the subcarriers which experience deep fades. Therefore, in order to enhance the performance of the system adaptive modulation is required, with which the modulation methods of the subcarriers are determined according to the estimated SNRs. The IEEE 802.11a system selects various transmission speed between 6 and 54 Mbps according to the modulation mode. There are three typical methods for SNR estimation: Direct estimation method uses the frequency domain symbols to estimate SNR directly by minimizing MSE (Mean Square Error), EVM method utilizes the distance between the demodulated constellation points and received complex values, and the method utilizing the Viterbi algorithm uses the cumulative minimum distance in decoding process to estimate the SNR indirectly. Through comparison analyses of three methods we propose a new SNR estimation method, which employs both the EVM method and the Viterbi algorithm. Finally, we perform extensive computer simulations to confirm the performance improvement of the proposed adaptive OFDM systems on the basis of IEEE 802.11a.

• Journal of Broadcast Engineering
• /
• v.15 no.4
• /
• pp.498-512
• /
• 2010

Intra coding is an indispensable coding tool since it can provide random accessibility as well as error resiliency. However, it is the problem that intra coding has relatively low coding efficiency compared with inter coding in the area of video coding. Even though H.264/AVC has significantly improved the intra coding performance compared with previous video standards, H.264/AVC encoder complexity is significantly increased, which is not suitable for low bit rate interactive services. In this paper, a Voting-based Intra Mode Bit Skip (V-IMBS) scheme is proposed to improve coding efficiency as well as to reduce encoding time complexity using decoder-side prediction. In case that the decoder can determine the same prediction mode as what is chosen by the encoder, the encoder does not send that intra prediction mode; otherwise, the conventional H.264/AVC intra coding is performed. Simulation results reveal a performance increase up to 4.44% overall rate savings and 0.24 dB in peak signal-to-noise ratio while the frame encoding speed of proposed method is about 42.8% better than that of H.264/AVC.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.11
• /
• pp.14-23
• /
• 2002

Two implementation methods for SOVA (Soft Output Viterbi Algorithm)of Turbo decoder are applied and verfied. The first method is the combination of a trace back (TB) logic for the survivor state and a double trace back logic for the weight value in two-step SOVA. This architecure of two-setp SOVA decoder allows important savings in area and high-speed processing compared with that of one-step SOVA decoding using register exchange (RE) or trace-back (TB) method. Second method is adjusting the reliability value with a scaling factor between 0.25 and 0.33 in order to compensate for the distortion for a rate 1/3 and 8-state SOVA decoder with a 256-bit frame size. The proposed schemes contributed to higher SNR performance by 2dB at the BER 10E-4 than that of SOVA decoder without a scaling factor. In order to verify the suggested schemes, the SOVA decoder is testd using Xillinx XCV 1000E FPGA, which runs at 33.6MHz of the maximum speed with 845 latencies and it features 175K gates in the case of 256-bit frame size.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.271-277
• /
• 2013

A novel approach to solve signal variation due to ship rocking in maritime wireless communication is introduced. We assume a ship-to-shore based communication scenario, where the transmitter is on shore and the receiver on the ship. Due to the ocean conditions, such as the presence of waves and wind etc. the ship is not stable and constantly experiences some form of rocking motion. This rocking motion causes the antenna on the ship to sway, creating instability in the signal reception. We envisage that the signal is offset at the receiver incurring high Bit Error Rate. This paper is to investigate and counter this problem by using Multiple-input Multiple-output (MIMO) technique. We propose to implement beamforming technique with multiple transmit antennas. The implementation of this proposed method crafts a robust maritime communication network.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.437-446
• /
• 2007

In this paper, we numerically induced the optimal values of optical phase conjugator (OPC) position and dispersion coefficients of fiber sections, which can improve the bit error rate (BER) and design the adaptive WDM transmission system, as a function of the extinction ratio (ER) of 10 dB and 20 dB in $16{\times}40$ Gb/s WDM transmission system. It is confirmed that these optimal parameter values for effectively compensating overall WDM channels are dependence on the extinction ratio of signals as well as modulation format, transmitted channel numbers, which were investigated in previous researches. It is also confirmed that ER of 20 dB has the advantage of designing flexible WDM systems using optimal parameters than ER of 10 dB.