• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.467-468
• /
• 2015

능동형필터는 주로 비선형 부하로 부터 발생되는 정수배의 고조파를 보상하는데 응용되어 왔다. 본 논문에서는 국가핵융합연구소(NFRI)의 KSTAR 주장치의 전원공급장치인 PF MPS가 가동되면서 특이한 저차수 대역의 비정수 고조파가 발생되는데 이는 MG(motor generator)와 RPC (Reactive Power Compensator)간의 병렬공진 확대현상으로 나타나 고조파 전류의 증가, 전압왜형 상승 등 안정적인 전력계통 운영에 영향을 주고 있다. 따라서 이의 원인이 되는 특이성의 비정수 고조파를 저감시키기 위한 제어 알고리즘 개발과 모의시험에 관한 연구내용을 다루고자한다. 지금까지 개발된 알고리즘은 주로 정수배 고조파만을 대상으로 한 FFT의 일괄보상, 혹은 개별차수 보상방식이었으나 여기서는 DQ 변환 알고리즘을 채용하여 정수배 고조파는 물론 0.5차 단위의 비정수 고조파까지 제어하는 기술을 다루었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.10 no.4
• /
• pp.204-210
• /
• 1998

This paper presents the development of the probability density function applicable for wave heights (peak-to-trough excursions) in finite water depth including shallow water depth. The probability distribution applicable to wave heights of a non-Gaussian random process is derived based on the concept of the maximum entropy method. When wave heights are limited by breaking wave heights (or water depth) and only first and second moments of wave heights are given, the probability density function developed is closed form and expressed in terms of wave parameters such as $H_m$(mean wave height), $H_{rms}$(root-mean-square wave height), $H_b$(breaking wave height). When higher than third moment of wave heights are given, it is necessary to solve the system of nonlinear integral equations numerically using Newton-Raphson method to obtain the parameters of probability density function which is maximizing the entropy function. The probability density function thusly derived agrees very well with the histogram of wave heights in finite water depth obtained during storm. The probability density function of wave heights developed using maximum entropy method appears to be useful in estimating extreme values and statistical properties of wave heights for the design of coastal structures.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.5
• /
• pp.798-805
• /
• 2006

I evaluate the BER performance of downlink OFDMA systems in time variant Rayleigh Doppler fading channel, considering the carrier frequency offset and the nonlinear high power amplifier. I obtain the required output back-off of the nonlinear amplifier and value of frequency offset for good BER performance. And I also analyze the BER degradation upon Doppler fading channel.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2391-2397
• /
• 2007

I evaluate the BER performance of uplink OFDMA systems in time variant Rayleigh Doppler fading channel, considering the carrier frequency offset and the nonlinear high power amplifier. I obtain the required output back-off of the nonlinear amplifier and value of frequency offset for good BER performance. And I also analyze the BER degradation upon Doppler fading channel.

• 전자공학회논문지 IE
• /
• v.45 no.1
• /
• pp.44-49
• /
• 2008

In this paper, the performance for the non-linear satellite channel including the characteristics of group delay and gain ripple of transponder is analyzed with multi-level QAM-OFDM schemes. Comparing the BER performances between general OFDM and CI(Carrier Interferometry)-OFDM for various QAM schemes, the degree of performance improvement is presented in AWGN environments for specified nonlinear characteristics. The simulations are performed with the 36MHz bandwidth of transponder channel and 120Mbps transmission rate for QPSK, 8QAM, 16QAM, 32QAM, 64QAM schemes between normal and worst case condition. It is shown that the improvement measure by the CI-OFDM for the group delay of channel and nonlinear characteristic of HPA outperforms that for the gain ripple in the case of higher level QAM scheme in normal condition. And the simulation results show that the additional techniques like the channel coding and compensation scheme against the nonlinear characteristic are required for 32QAM and higher level QAM in worst case condition.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.2
• /
• pp.85-92
• /
• 1999

The fact that material degradation can be evaluated by measuring nonlinear acoustic effect has been proposed by previous studies. The most conventional method to measure nonlinear acoustic effect is to measure the absolute magnitude of fundamental and $2^{nd}$ order harmonic frequency component in the propagated ultrasonic wave. For this aim, power spectral analysis technique has been used widely. However, the power spectral analysis has fatal disadvantage that the gaussian additive noise superimposed in the wave signal remains in the power spectrum domain. Moreover, the magnitude of $2^{nd}$ order harmonic frequency component generated by nonlinear effect is so small that it may be suppressed by the noise remained in the power spectrum. In order to overcome this problem, this paper proposes an alternative method using bispectrum analysis, which can reduce the effect of addictive gaussian noise and. the nonlinear parameter can be obtained more stably. Simulations showed that the proposed method can obtain the value of nonlinear parameter near to the true value in the case of low SNR signal. Also, in order to confirm the usefulness of our method in actual case, we compared the nonlinear parameter obtained by using both of power spectral and bispectral analysis for several specimen intentionally degraded by fatigue load.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.4
• /
• pp.358-363
• /
• 2008

Ultrasonic nonlinearity has been considered as a promising method to evaluate the micro damage of material; however, its magnitude is so small that its measurement is not easy. Thus, in this study, we investigate the effects of such experimental system dependent factors in the measurement of ultrasonic nonlinear parameter by using contact PZT transducer. Experimental results showed that the effect of system dependent nonlinearity is reduced when the contact pressure and transducer input voltage are sufficiently large. These results will be very useful to find out the proper experiment condition to measure rather accurate nonlinear parameter.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2002.08a
• /
• pp.62-65
• /
• 2002

파랑은 주로 먼바다에서 바람에 의해 생성되어 육지로 전파해오면서 천수, 굴절, 회절, 반사, 부서 짐 등의 여러 가지 변형의 과정을 거친다. 이러한 파랑의 변형을 예측하는 한 방법은 비압축성 유체와 비회전류의 연속방정식인 Laplace 방정식을 지배 방정식으로 하고 해수면에서의 운동학적 경계조건과 동역학적 경계 조건, 그리고 바닥에서의 운동학적 경계조건을 적용하여 해를 구한다. (중략)

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06d
• /
• pp.13-17
• /
• 1998

집속음장이 고조파성분을 이용한 초음파영상의 특성을 해석하는 초기단계로서 음축에 수직하게 놓인 강체판의 직선 edge가 집속 가우스빔을 회절시킨다고 가정하고, edge의 전후에서 발생하는 제 2고조파를 고려해서 회절음장을 해석하였다. 계산에서는 그린함수의 간단화를 위해 , Fresnel 근사를 이용하였고 실험에서는 성형전극을 형성시킨 요면 압전진동자에 의한 1.9MHz 집속가우스음원에 의해 만들어지는 초음파 빔에 수직하게 edge을 삽입시켰다. 회절 edge 후방에서 음장을 관측한 결과, 제 2고조파의 빔형상을 제외하고는 계산치와 실험치가 잘 일치하고 있다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.4
• /
• pp.489-499
• /
• 2011

RFID technologies, which allow collecting, storing, processing, and tracking information by wirelessly recognizing the inherent ID of object through an attached electronic tag, have a variety of application areas. This paper presents a novel carrier leakage suppression RF(CLS-RF) front-end for ultra-high-frequency RF identification reader. The proposed reader CLS-RF front-end structure generates the carrier leakage replica through the nonlinear path that contains limiter. The limiting function only preserves the frequency and phase information of the leakage signal and rejects the amplitude modulated tag signal in the envelope. The carrier leakage replica is then injected into the linear path that contains phase shifter. Therefore, the carrier leakage signal is effectively cancelled out, while not affecting the gain of the desired tag backscattering signal. We experimentally confirm that the prototype shows a significant improvement in the leakage to signal ratio by up to 36 dB in 910 MHz, which is consistent with our simulation results.