• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.47-55
• /
• 2000

Non-linear behavior of rock under compression can be predicted by a crack model. Crack growth in rock renders rock anisotropic. The degree of anisotropy is explained in terms of elastic moduli as a function of load level. In this study, we calculate the changes of elastic moduli due to crack growth numerically by using a crack model and compare these values with experimental results obtained from the measurement of ultrasonic wave velocities. Image processing technique is used to obtain the initial crack information needed for the numerical calculation of elastic moduli.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.362-365
• /
• 2011

본 논문에서는 통계적인 방법을 이용하여 점탄성 제진재인 합성고무의 물성에 대한 변동성을 평가하는 방법을 제안하고 측정데이터를 이용하여 합성고무에 대한 평가를 수행하였다. 고무 물성의 불확실성 인자로는 외기 온도의 변화와 실험 데이터의 오차 및 점탄성 제진모델의 오차를 고려하였다. 고무는 분수차 미분 모델로 표현되었고 온도의 영향은 비선형 이동계수모델을 도입하여 복소계수로 나타내어 동강성과 감쇠를 표현하였다. 이러한 물성모델을 바탕으로 고무에 대한 물성 실험데이터와 물성계수의 확률밀도함수 사이에 정의된 우도함수를 최대화하는 통계적 보정방법을 이용하여 물성모델의 물질계수들에 대한 변동성을 추정하였다.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.5 s.72
• /
• pp.683-694
• /
• 2004

Advanced analysis and optimal design of semi-rigid space steel frames were presented. The advanced analysis can predict the combined nonlinear effects of connection, geometry, and material on the behavior and strength of semi-rigid frames. The Kishi-Chen power model was used to describe the nonlinear behavior of semi-rigid connections. Geometric nonlinearity was determined using stability functions. Material nonlinearity was determined using the Column Research Council (CRC) tangent modulus and the parabolic function. The direct search method proposed by Choi and Kim was used as optimization technique. One by one, the member with the largest unit value evaluated using the LRFD interaction equation were placed adjacent to a larger member selected from the database. The objective function was assumed to be the weight of steel frame, while the constraint functions were load-carrying capacities, deflections, inter-story drifts, and the ductility requirements. The member sizes determined using the proposed method were compared to those derived from the conventional LRFD method.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.6 s.67
• /
• pp.661-672
• /
• 2003

The advanced analysis and optimal design of semi-rigid frame were presented. Advanced analysis can predict the combined nonlinear effects of connection, geometry, and material on the behavior and strength of semi-rigid frames. The Kishi-Chen power model was used to describe the nonlinear behavior of semi-rigid connections. Geometric nonlinearity was determined using stability functions. On the other hand, material nonlinearity was determined using the Column Research Council (CRC) tangent modulus and parabolic function. The direct search method proposed by Choi and Kim was used as optimization technique. The member with the largest unit value evaluated using the LRFD interaction equation was replaced one by one with an adjacent larger member selected from the database. The objective function was assumed as the weight of steel frame, with the constraint functions accounting for load-carrying capacities, deflections. inter-story drifts, and ductility requirement. Member sizes determined by the proposed method were compared with those derived using the conventional LRFD method.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.1
• /
• pp.35-44
• /
• 2006

In general typically granular soils contain a certain amount of fines. It is also widely recognized that foundation soils under working loads show highly non-linear behavior from very early stages of loading. In the present study, a series of laboratory tests with sands of different silt contents are conducted and methods to assess strength and stiffiness characteristics are proposed. Modified hyperbolic stress-strain model is used to analyze non-linearity of silty sands in terms of non-linear Degradation parameters f and g as a function of silt contents and Relative density Dr. Stress-strain curves were obtained from a series of triaxial tests on sands containing different amounts of silt. Initial shear modulus, which is used to normalize Degradation modulus of silty sands, was determined from resonant column test results. From the laboratory test results, it was observed that, as the Relative density increases, values of f decrease and those of g increase. In addition, it was found that values of f and g increase and decrease respectively as a Skeleton void ratio $(e_{sk})$ increases.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.11a
• /
• pp.261-266
• /
• 1998

손끝으로 물건을 문지르거나 잡아 질감을 느끼는 경우 나타나는 현상을 Hertzian 접촉이론을 응용하여 수학적인 모델링을 하였다. 물체표면에 손끝이 접촉하여 눌려지게되면 변형이 일어나게 되고 변형된 모양과 정도에 따라 촉감을 느끼게 .된다. 손끝은 점탄성체로서 누르는 변위에 따라 탄성계수와 점성계수 값이 비선형으로 변하게 되는 현상을 이론과 실험을 통하여 연구하였다. 특히 손끝이 직물을 누를 때 나타나는 현상을 측정하여 질감표현과의 관계를 분석하였다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1993.07a
• /
• pp.178-182
• /
• 1993

유속의 연직분포를 알기 위한 방안의 하나로 Galerkin 함수 전개모델에 대한 연구가 활발히 진행되어 왔다(Heaps, 1972； Davies, 1980； Cordon,1982； 최,1983；강등,1993). Galerkin 함수 이용 3차원 모델은 수직좌표상의 수평유속 성분을 수평좌표, 시간에 따라 변하는 계수 와 수심에 따라 변하는 함수군의 곱의 형태로 선형전개하며, 계수의 값은 Galerkin 방법을 써서구한다. (중략)

• Korean Journal of Materials Research
• /
• v.7 no.4
• /
• pp.339-346
• /
• 1997

회전 불밀에 있어서 볼의 운동을 비선형 spring과 비선형 deshpot로 구성된 Kelvin모델을 사용한 DEM(Distinct Element Method;개별요소법)에 의하여 2차원으로 해석하였다. 모델에 있어서 점성계수는 볼과 밀벽사이의 반발실험 데이타로 부터 결정하였다. 각볼의 동적인 운동은 비선형 점탄성과 Newton의 운동법칙를 기초로하여 모사되었다. 밀이 회전하는 동안 볼의 궤적과 동적인 운동은 실제 실험에 의한 밀내에서의 볼의 운동고 잘 일치하였다. 본 연구에서 제안된 모델 시뮬레이션은 회전 볼밀내의 실제의 3차원인 볼의 운동에 대한 해석에 중요한 단서가 될 수 있었다. 볼의 운동고 운동에너지는 회전 볼밀의 속도와 볼의 충진율에 의해 크게 영향을 받았다.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.1
• /
• pp.11-18
• /
• 1992

비선형성 및 측정할 수 없는 외란에 영향을 받은 무인잠수정의 깊이 조종을 위한 슬라이딩 모우드 조종기를 설계하였다. 먼저, 성형화 된 운동방정식을 기초로 하여 슬라이딩 표면계수를 수치행석으로 최적화 시켰으며, 이 설계된 슬라이딩 표면을 비선형 운동방정식에 적용하여, 그 특성을 고찰하었다. 마지막으로, 용이하게 설계된 슬라이딩 모우드 조종기를 비선형성과 외란을 갖는 NPS(Naval postgraduate School) 형태의 무인잠수정에 적용하여 얻어진 실험치의 동적 특성을 통해 슬라이딩 모우드의 강인성을 확인하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.6 no.3
• /
• pp.31-42
• /
• 1987

An ultrasonic pulse-echo diagnostic system for tissue characterization with the estimation of attenuation coefficients is developed and its performance has been examined by system implementation. The system divided into the ultrasonic generator, A/D converter, data communication, computer for signal processing. The methods for estimating the spatial distribution of acoustic attenuation coefficients using the moment analysis are proposed. The experimental results indicate the potential of the methods for tissue characterization.