• Geotechnical Engineering
• /
• v.14 no.1
• /
• pp.59-70
• /
• 1998

Samples of silty sands and hydraulic fill ground were investigated by dynamic triaxial teats in order to evaluate the liquefaction strengths. In the tests, (1) undisturbed and disturbed samples were prepared, (2) dynamic shear strengths were measured under isotropic and anisotropic condition, and (3) the test results were compared with the other results which were tested by domestic and foreign researchers. The liquefaction shear strengths under ismtropic test condition were presented in terms of the relative densities. The amount of silt under 30o hardly influenced on the liquefaction strength. In the test results of anisotropically consolidated samples the liquefaction strength was dependent on the magnitude of the effective consolidation ratio. These teat results show that the liquefaction strength of the silty sand in Korea went coast exists within the boundary of the values suggested by Seed and Peacock(1971).

• Journal of the Korean Society of Radiology
• /
• v.12 no.2
• /
• pp.261-269
• /
• 2018

The fractional anisotropy value of the basal ganglia fibers in the brain gray matter region was analyzed by Tract-Based Spatial Statics(TBSS) method after acquiring the diffusion tensor image to identify the presence or absence of brain white matter damage to smoking in male. As a result of measurement analysis, the fractional anisotropy measurement value was lower in smokers than non-smokers in all areas, and the FA value was statistically significant. smoking significantly affects all the anatomic micro structural changes in the brain gray matter and damages the nerve fiber tract. As a result, it can affects functional abnormalities related to the minute changes of the brain due to smoking.

• Journal of KSNVE
• /
• v.8 no.6
• /
• pp.1103-1112
• /
• 1998

A new time series method, directional ARMAX (dARMAX) model-based approach. is proposed for rotor dynamics identification. The dARMAX processes complex-valued signals, utilizing the complex modal testing theory which enables the separation of the backward and forward modes in the two-sided frequency domain and makes effective modal parameter identification possible, to account for the dynamic characteristics inherent in rotating machinery. This paper is divided into two parts : The dARMAX modeling, analysis. and fitting strategy are presented in the first part. whereas a evaluation of its performance characteristics based on both simulated and experimental data is presented in the second.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.681-686
• /
• 2004

Identification of asymmetry and anisotropy of rotor system is important for diagnosis of rotating machinery. Directional frequency response functions (dFRFs) are known to be powerful tool in effectively detecting the presence of asymmetry or anisotropy. In this paper, an estimation method of dFRFs for rotors is newly developed, when both asymmetry and anisotropy are present. The method transforms the finite degrees-of-freedom time-varying linear differential equation of motion to an infinite degree-of-freedom time-invariant linear one, employing the modulated coordinates. The validity of the method is demonstrated by numerical simulation with a simple rotor model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.304-309
• /
• 2003

A new modal analysis method for rotor systems with periodically time-varying parameters is proposed. The essence of method is to introduce modulated coordinates to derive the equivalent time-invariant equation. This paper presents a modal analysis method using modulated coordinates fur general rotors, of which rotating and stationary parts both possess asymmetric properties. The equation of motion with time-varying parameters is transformed to an infinite order matrix equation with the time-invariant parameters. A theory of modal analysis for the system is presented with the infinite order equation and a couple of reduced order equations. A numerical example with simple asymmetric rotor is provided to demonstrate the effectiveness of the proposed method

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.7-14
• /
• 2003

This study has investigated the feasibility of caissons for accelerating consolidation (C.A.C.) constructed in clays with anisotropic permeability by improving the former study on C.A.C. in isotropic clays. Analytical solutions for excessive pore water pressures of two-dimensional consolidation equation and average degrees of consolidation with varying time factors have been provided by considering anisotropic permeability. With varying anisotropic permeability ratios of 5, 10, and 50, consolidation times required for reaching the average degree of consolidation of 90% for C.A.C. at the section of $\xi$=0.1 are shorter than those for conventional caissons by 8, 13, and 47 times, respectively. C.A.C. is more effective in reducing consolidation time as anisotropic permeability ratio increases. This study provides also plots for average degrees of consolidation versus the width to depth ratios of analyzed sections and permeability ratios, which will enable engineers to determine easily average consolidation settlements.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.4
• /
• pp.35-42
• /
• 2012

This paper evaluates the effect of anisotropic conductivity on the seepage face and reliability index of an homogeneous dam with and without toe drain. The analysis are conducted under steady state saturated-unsaturated seepage condition using finite element method. Various anisotropic conductivity ratios were interpreted under such conditions as the vertical conductivity is reduced while the horizon conductivity is fixed. The shear strength of soil is defined by the modified Mohr-Coulomb failure criterion. The analysis results demonstrate that the length of seepage face and reliability index at the downstream and upstream of the dam increase with an increasing anisotropic ratio. These results of the seepage face and reliability index, however, depend on the total head difference between the upstream slope and downstream toe. The difference in seepage face and reliability index is attributed to the different equipotential head with different anisotropic ratios of the dam material.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.414-414
• /
• 2020

고전 천수방정식을 적용한 2차원 도시홍수 모델링에서는 지형의 정확한 반영을 위해 고해상도 격자가 요구되며 이는 많은 계산시간과 노력을 필요로 한다. 최근에는 다공성 천수방정식을 적용한 도시홍수해석으로 많은 계산 노력이 요구되는 도시홍수모델링의 한계를 극복한 연구가 많이 이루어지지고 있다. 이러한 연구는 도시 홍수에서 흐름이 공간적으로 변화할 때 불균일 공극이 존재하므로 격자의 크기를 다르게 하여 이러한 불균일성을 해결하고자 하는 등방성 천수모형의 적용에서 시작되었다. 하지만, 등방성 공극을 고려한 도시홍수 해석모형은 대표요소체적(REV)보다 더 큰 격자의 적용을 해야 하는 제한성을 가진다. 반면, 비등방성 공극은 대표요소체적의 적용이 필요하지 않아 불균일 공극의 크기에 관계없이 이론상으로는 동일한 해상도의 격자가 사용가능하긴 하지만, 실제 도시홍수 해석에서 중요하면서도 도전적인 연구이다. 본 연구에서는 도시홍수의 효율적 계산을 위해 비등방성 공극을 고려한 적분형 다공성 천수방정식을 기반으로 하는 2차원 도시홍수 해석모형을 개발하였다. 모형의 개발을 위해, 적용 격자내에서 도시지역의 건물이 차지하는 길이 및 면적을 산정하고 그 값을 2차원 천수방정식에 적용 가능하도록 체적공극(𝜙_j)와 면적공극(𝜓_k)을 2차원 고전 천수방정식에 추가하였다. 개발모형은 고전 천수방정식, 등방성 공극 고려(미분형 다공성) 천수방정식 및 비등방성 공극 고려(적분형 다공성) 천수방정식의 적용이 가능하여, 각 모형에 적합한 2차원 격자 생성, 각 모형의 매개변수를 보정 그리고 정확성, 효율성, 적용성이 비교 가능하다. 각 모형의 정확성과 효율성 비교를 위해 3가지의 오차 비교 (구조적 오차, 격자크기 오차, 공극 모형 오차), 계산시간 비교, 공간 변동성 검증을 위한 수심 종단형상 비교하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.41.2-41.2
• /
• 2014

고립된 은하주위의 위은하들의 편향된 낙하 운동을 보인다. 이 편향성을 결정하는 요소는 속도가위장의 비등방성인데 속도가위장의 단축으로 위은하들의 낙하가 일어나는 관측적 증거를 제시하고 이 편향성을 측정하여 은하단과 은하의 동력학적 질량을 결정한 후 궁극적으로 중력 법칙을 검증한다.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.6
• /
• pp.61-68
• /
• 2007

The problem on cyclic plate load tests was analyzed by finite element method using an anisotropic hardening constitutive model. The constitutive model was coded to user subroutine in ABAQUS. Using the result of the analysis, Young's moduli corresponding to various strain levels were evaluated by a back calculation method and were very similar to those of input. On the basis of the back calculation method plate loading tests were verified. As a result, deformation moduli could be evaluated practically from cyclic plate load tests with respect site conditions.