• Korean Journal of Optics and Photonics
• /
• v.13 no.2
• /
• pp.98-104
• /
• 2002

We present a new self-calibration method to remove the systematic error of a 2-axis lateral shearing interferometer that has been specially designed for optical testing of aspheric optics. The method takes multiple measurements by rotating the test optics and extracts the systematic error by fitting the measured wavefronts into the Zernike polynomials. The method works with arbitrary azimuthal angles for test optics rotation, which offers an advantage of correcting the error induced by the non-orthogonality of the two axes of wavefront shearing as well as the error caused by the optical components of the interferometer system itself.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.13-17
• /
• 2024

A color sensor is an optical sensor used to take pictures of objects, including the human body, and reproduce them on a monitor. A color sensor quantifies the red, green, and blue light coming from an object and expresses it as a digital number, and can judge the state of the object by comparing the values ​​or the ratio.In this study, the standard colors displayed on the monitor were measured using a color sensor, and the magnitudes of the red, green, and blue components, or RGB values, were compared with the values ​​indicated by the computer. When measured with the TCS 34725 color sensor, even when the light generated by the computer consists of only one or two of red, green, and blue light, the color sensor detected all three components. Additionally, when the colors of two monitors with the same RGB values ​​were measured using a color sensor, different RGB values ​​were measured. These results can be attributed to the imperfection of the color filters used to express colors on the monitor and the imperfect optical characteristics of the photodiodes used in the color sensor. When photographing an object and judging its condition based on its color, you must use the same type of camera or smartphone.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.2
• /
• pp.87-92
• /
• 2009

Remote detecting system for a radiation contamination using a plastic scintillator and an optical fiber was developed. Using a commercially available silica optical fiber and a plastic scintillator, we tested then for a real possibility as a remote monitoring detector. Also, a plastic scintillator was developed by itself, and evaluated as a radiation sensor. The plastic scintillator was made of epoxy resin, a hardener and an organic scintillation material. The mixture rate of the epoxy resin, hardener and organic scintillator was fixed by using their emission spectrum, transmittance, intensity etc. In this study, in order to decrease the light loss of an incomplete connection between an optical fiber and a scintillator, the optical fiber was inserted into the scintillator during the fabrication process. The senor used a plastic optical fiber and was estimated for its detection efficiency by an optic fiber's geometric factor.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.285-290
• /
• 2001

There are some of the tools for measuring enterprise and group behavior on construction projects. Of these, performance is vital. But, because of imperfect factors, it came under attack. An enterprise can, however, improve it's problem with performance measurement. For this reason, it is essential tool for achieving objectives of an enterprise. Domestic construction industry must understand that what isn't measured, it not only can't manage it also can't improve. The objective of this study is to investigate the performance measurement tools and items in overseas construction projects(UK, Australia). Based on the data, the study suggests the considerable items, problems and restrictive factors as it is accepted on domestic construction industry.

• Journal of the Korean earth science society
• /
• v.32 no.6
• /
• pp.595-601
• /
• 2011

In this paper, I propose the algorithm that the location of a magnetic dipole can be detected from the magnetic gradient tensor. I induce the location vector of a vertically magnetizated dipole from the magnetic gradient tensor. Deficit of magnetic moment of magnetic dipole makes the induced location information incomplete. However, if the observation of magnetic gradient tensor would be collected on more points, the algorithm is able to catch the location of the magnetic dipole by clustering the solution of the proposed algorithm. For example, I show that the synthetic case of borehole observation of magnetic gradient tensor can find the source location successively by picking common solution area.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.7
• /
• pp.545-551
• /
• 2016

Surface temperature of supersonic wind tunnel model was measured using an infrared thermography technique. To measure the temperature quantitatively, various calibration techniques such as blackbody calibration which converts detected camera signal to temperature, distortion correction due to the camera lens and an imbalance of camera pose, and emissivity calibration which considers viewing angles to the model surface, were employed. Throughout the study, for the quantitative as well as qualitative surface temperature measurement, it was verified that the distortion correction must be considered even for the use of two-dimensional model in aerodynamics testing.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.243.2-243.2
• /
• 2014

기존의 저압 플라즈마에 비해 여러 장점을 가지는 중간압력 플라즈마 및 대기압 플라즈마는 수년전부터 많은 관심을 받고 있으며 다양한 응용분야에서 활발히 이용되고 있다. 기초과학으로서의 플라즈마 측면뿐만 아니라 플라즈마 응용의 결과들은 플라즈마의 특성에 따라 좌우되므로 플라즈마 진단 역시 최근 플라즈마 연구에 중요한 부분을 차지하고 있다. 일반적으로 플라즈마 내의 모든 화학적 반응 및 물리적 반응에 있어 전자가 결정적인 역할을 하기 때문에 플라즈마 내의 전자의 정보를 대표하는 지표인 전자온도($n_e$) 및 전자밀도($T_e$)의 측정이 중요하다. 본 연구에서는 대기압 플라즈마에서 중성원자와 전자의 상호작용에 의한 연속 방출광을 자외선-가시광 영역에서 측정하고, 이를 기반으로 $n_e$ 및 $T_e$를 측정하였다. 높은 압력에서 불완전 전리된 플라즈마는 이온화율이 낮고 중성원자의 밀도가 이온밀도보다 훨씬 높기 때문에 중성 제동복사(Neutral bremsstrahlung)의 방사도를 이용한 ne 및 Te의 측정이 가능하다. 특히 아르곤 대기압 플라즈마에서 측정된 연속 방출광 스펙트럼의 자외선 영역(280~450 nm)에서는 중성 제동복사에 의한 연속 방출광뿐만 아니라 수소분자에 의한 dissociative 연속 방출광이 함께 존재하는 것이 확인되어 최종적으로 두 연속 방출광을 고려하여 정확한 ne 및 Te를 측정할 수 있었다. 대기압 아르곤 축전결합방전에서 입력전력에 따라 전자온도는 2.5 eV로 유지되었으며, 전자밀도는 $(0.7-1.1){\times}10^{12}cm^{-3}$ 범위에서 $j_d{\propto}n_e{\propto}P_{rf}$ 관계를 따르며 변화하는 것이 관찰되었다.

• Survey Research
• /
• v.8 no.2
• /
• pp.1-19
• /
• 2007

This paper explores the extent to which property scale, in particular housing price is useful as the measure of an individual's economic status. Its main object is to compare the distributions of the measure of housing wealth and other objective or subject measures, i,e., reported income and subjective class identification. Additionally, their relations to other variables are examined. An analysis of distributions and cross-tables based upon national survey of 2005 family and the database of apartment price of Kookmin Bank are used. It is shown that the measure of housing wealth differs from other economic status measures in terms of distribution and the relations to other variables, such as attitude variables and consumption-related variables. Its results also suggest that the measure of housing wealth can be applied to various areas as a new measure of an individual's objective economic status, in such a way to improve applicability of social survey.

• Journal of Biosystems Engineering
• /
• v.29 no.2
• /
• pp.131-140
• /
• 2004

본 연구에서는 배아미, 현미, 가능성쌀들 및 진공을 요하는 식품의 품질을 보존하기 위해서 연속식 자동진공포장기를 국내 최초로 개발하였다. 배아미의 진공포장 성공률은 92.6%이었고, 실패율 7.4%에서 진공포장기 자체에서 불완전 테이핑의 밀봉작업으로 진공이 서서히 풀리는 경우가 5.5%, 그리고 진공하기 전 자동비닐포장기에서 포장시 봉지 윗부분 밀봉이 불완전해 1.9%가 진공이 풀렸다. 이에 개발한 자동진공포장기의 진공포장성공률은 약 94.5%수준이었다. 진공포장기로 진공시간에 따른 진공압력을 측정하였고, 배아미 2, 3, 5 kg를 진공포장하는데 소요되는 시간은 각각 6, 8, 11초이었다. 진공포장으로 처리한 배아미와 진공포장 처리하지 않은 배아미를 각각 3재월간 저장실험하여 백도, 함수율, 과산화물가, 산가를 저장기간별로 분석하였다. 그 결과, 백도는 진공처리가 2 감소, 비처리가 4 감소하였고, 함수율은 진공처리가 0.8%감소, 비처리가 1.3%감소, 과산화물가는 진공처리가 최대 1.89 meq/kg까지 서서히 증가하였고, 비처리가 3.45 meq/kg까지 급속히 증가하였다가 서서히 감소하였다. 산가 역시 진공처리가 최대 0.71 mg/g까지 서서히 증가하였고, 비처리의 경우는 0.98 mg/g까지 급속히 증가하였다. 그리고 현미의 진공포장에서도 산가 및 과산화물가 변화가 배아미 경우와 비슷하였다. 또한 진공포장 제품에 인위적으로 쌀벌레들을 넣은 경우 15일 지나면 산소부족으로 모두 사멸하였다. 따라서 개발한 진공포장기로 진공포장한 경우 배아미 및 현미의 품질을 잘 보존할 수 있었다.

• The Journal of the Korea Contents Association
• /
• v.15 no.4
• /
• pp.350-356
• /
• 2015

The aim of this study is to perform simulations to design the detector module with crystal array by Monte Carlo simulation. For this purpose, a small animal PET scanner, employing module with 1~8 crystal array discrimination scheme, was designed. The proposed scanner has an inner diameter of 100 mm with detector modules in crystal array. Each module is composed of a 5.0 mm LSO crystal with a $2.0{\times}2.0mm^2$ sensitive area with a pitch 2.1 mm and 10.0 mm thickness. The LSO crystals are attached to the SiPM which has a dimension of $2.0{\times}2.0mm^2$. The detector module with crystal array of the designed PET detector was simulated using the Monte Carlo code GATE(Geant4 Application for Tomographic Emission). The detector is enough compensation for the loss of data in sinogram due to gaps between modules. The results showed that the high sensitivity and effectively reduced the problem about the missing data were greatly improved by using the detector module with 1 crystal array.