• The Journal of Engineering Geology
• /
• v.11 no.1
• /
• pp.13-23
• /
• 2001

Rock slope near the road or railroad is affected by the outside temperature and iterative freezing-thawing process during winter and early spring. The purpose of this study is to analyze the stability of rock slope which is iniluenced by deterioration due to the freezing-thawing. Method of analysis is homogenization method which find the strength property of discontinuous rock mass and as a strength failure criterion, Drucker-Prager failure criterion is used, The deterioration property of real rock is obtained by a freezing-thawing labordtory test of tuff and this quantitative property is used as a basic data of stability analysis of rock mass. To evaluate the deterioration depth due to the freezing-thawing in the field rock slope, one dimensional heat conductivity equation is used and as a a result we can find the depth of which is affected by a temperature. After determined the freezing-thawing depth of model slope, the pattern of rock mass strength value of model rock slope which excess the limit of self-load is analyzed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.2
• /
• pp.169-177
• /
• 2015

Because technology of the sintering process is highly advanced, the gerotor used in the internal gear pumps of vehicles has advantages for manufacturing complex profiles and obtaining durability and minimization. However, it has been necessary to continuously improve the flow rate and noise of internal gear pumps for better fuel efficiency. The existing rotor was designed using a translation algorithm. This caused a discontinuity of the rotor profile, which had adverse effects on the performance. In this study, to improve the discontinuity of the profile, a new design program using a rotation and translation algorithm was developed, and two types of combined multiple profiles (three-ellipses and ellipse 1-involute-ellipse 2) were generated. Then, the performances (flow, flow rate, specific sliding, and pressure angle) of these profiles were calculated. On the basis of the calculation results for the performances, optimal designs of the two types were carried out and verified by comparing their performances with those of the existing rotor profiles.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.07a
• /
• pp.124-126
• /
• 2012

3차원 동영상은 수많은 응용분야에서 차세대 멀티미디어 콘텐츠로 큰 주목을 받고 있지만 2차원에서 3차원 콘텐츠로의 과도기인 현 시점에서 3차원 콘텐츠의 부족현상은 관련 산업분야의 큰 문제점으로 떠오르고 있다. 2D-to-3D 변환 기술은 높은 비용 없이 기존의 방대한 2차원 콘텐츠를 3차원 콘텐츠로 재사용하는 것이 가능하기 때문에 3차원 콘텐츠의 부족 문제를 해결할 수 있는 기술로 큰 관심을 끌고 있다. 본 논문에서는 블록 단위 초점 정보의 보간을 통한 새로운 초점 기반 3차원 변환 기법을 제안한다. 기존의 화소 단위 초점 측정치를 그대로 깊이 정보로 이용하는 경우나 분할 영역 단위 초점 측정치를 깊이 정보로 활용하는 경우는 이웃 화소간 깊이정보의 불연속성이 발생할 수 있지만 제안방식은 블록 초점 측청치의 보간수행으로 인해 이웃 화소 사이에서 뿐만 아니라 블록경계 혹은 영역경계에서도 특별할 스무딩필터 처리 없이도 화소간 깊이정보의 불연속성이 발생하지 않게 된다. 실험결과를 통해 제안한 방식이 기존의 방식들 보다 더 자연스러운 깊이 정보 추출 성능을 보여준다는 것을 알 수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.8
• /
• pp.566-573
• /
• 2019

In order to obtain high-quality images by motion compensation in the airborne synthetic aperture radar (SAR), accurate motion sensing in image acquisition section is necessary. Especially, reducing relative position error and discontinuity in motion sensing is important. To overcome the problem, we propose a pre-parametric error modeling (P-PEM) algorithm which is a real-time motion sensing algorithm for the airborne SAR in this paper. P-PEM is an extended version of parametric error modeling (PEM) method which is a motion sensing algorithm to mitigate the errors in the previous work. PEM estimates polynomial coefficients of INS error which can be assumed as a polynomial in the short term. Otherwise, P-PEM estimates polynomial coefficients in advance and uses at image acquisition section. Simulation results show that the P-PEM reduces relative position error and discontinuity effectively in real-time.

• Journal of Broadcast Engineering
• /
• v.24 no.1
• /
• pp.25-31
• /
• 2019

360 video is attracting attention as immersive media, and is also considered in VVC (Versatile Video Coding), which is being developed in JVET (Joint Video Expert Team) as a new video coding standard of post-HEVC. A 2D image projected from 360 video for its compression may has discontinuities between the projected faces and inactive regions, and they may cause the visual artifacts in the reconstructed video as well as decrease of coding efficiency. In this paper, we propose a method of efficient geometric padding to reduce these discontinuities and inactive regions in the projection format of SSP (Segmented Sphere Projection). Experimental results show that the proposed method improves subjective quality compared to the existing padding of SSP that uses copy padding with minor loss of coding gain.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.468-473
• /
• 2004

본 연구에서는 기존의 ㅡ자형, ㄴ자형, ㄷ자형 조파시스템이 경사진 방향으로 가동될 때 발생되는 에너지의 불연속성으로 인한 회절철상이나 구조물에서 반사된 파가 조파판에서 발생하는 재 반사 철상의 단점을 보완할 수 있도록 곡선형태의 조파판을 배치하여 수치실험을 행하였다. 조파판을 곡선형으로 배치시켜 실험 대상물에서부터 반사된 파가 가능한 조파판에 직각으로 부딪치도록 유도하였다. 편미분 격자생성기법을 도입하여 구성된 곡선형 격자망에서 Copeland(1985)의 완경사 방정식을 이용하여 수치해석 하였다. 우선, 1차원 실험영역에서 파를 생성하여 대상구조물에서 반사되어 돌아온 반사파 성분을 조파판에서 흡수하면서 입사파를 생성하는 현상을 재현하였다. 그 후, 실험영역을 2차원으로 확장시켜 조파판을 곡선형으로 배치하여 수치 실험하여 진행파와 회절파의 중첩으로 고안된 해석해와 수치 해를 비교하려다. 그 결과, 기존의 조파시스템에 비하여 에너지 불연속선에서의 회절 현상도 발생하지 않고 반사파 성분을 효율적으로 흡수하는데 효과적임을 알아냈다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.752-755
• /
• 2011

이종재료의 열전달문제 수치해석시 추가적으로 만족시켜야 하는 계면경계조건들의 존재와 계면경계로 인한 불연속면의 처리는 근사함수의 구성 뿐만 아니라 수치기법의 개발 자체를 어렵게 만든다. 본 논문에서는 계면경계의 불연속성을 모델링하는 특수한 함수를 포함하고 계면경계조건을 항상 만족시킬 수 있는 근사함수를 구성하고, 계면경계문제의 강형식을 직접 이산화하며 고속으로 해를 계산할 수 있는 이동최소제곱 차분법을 제시한다. 계면경계조건이 매입된 이동최소제곱 차분법으로 이종재료의 열전달문제를 해석한 결과, 높은 정확성과 효율성을 갖는 것을 확인할 수 있었다.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.549-557
• /
• 2022

Tunnel face mapping involves the determination of rock discontinuities or weak rock conditions where extra support might be required. In this study, we investigated the application of Lidar scanning and photogrammetry to quantitatively characterize discontinuities of the rock mass on the tunnel face during excavation. The 3D models of tunnel faces generated by using these methods enable accurate and automatic discontinuity measurement to overcome the limitations of manual mapping. The results of this study show that both photogrammetry and Lidar can be used to reconstruct the 3D model of the tunnel face, although the photogrammetric 3D model is less detailed than its counterpart produced by Lidar. Given acceptable accuracy and cost-effectiveness, photogrammetry can be a fast, reliable, and low-cost alternative to Lidar for acquiring 3D models and determining rock discontinuities on tunnel faces.

• Journal of the Korean Society of Safety
• /
• v.23 no.3
• /
• pp.87-92
• /
• 2008

A finite element method which is discontinuous in time is developed for the solution of the classical parabolic model of heat conduction problems. The approximations are continuous with respect to the space variables for each fixed time, but they admit discontinuities with respect to the time variable at each time step. The method is superior to other well-known approaches to these problems in that it allows a wider range of moving boundary value problems to be dealt with, such as are encountered in complex engineering operations like ground freezing. The method is applied to one-dimensional and two-dimensional heat conduction problems in this paper, although it could be extended to more higher dimensional problems. Several example problems are discussed and illustrated, and comparisons are made with analytical approaches where these can also be used.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.3
• /
• pp.381-390
• /
• 2001

In this paper, a new improved crack analysis technique by Element-Free Galerkin(EFG) method is proposed, in which the singularity and the discontinuity of the crack successfully described by adding enrichment terms containing a singular basis function to the standard EFG approximation and a discontinuity function implemented in constructing the shape function across the crack surface. The standard EFG method requires considerable addition of nodes or modification of the model. In addition, the proposed method significantly decreases the size of system of equation compared to the previous enriched EFG method by using localized enrichment region near the crack tip. Numerical example show the improvement and th effectiveness of the previous method.