• Journal of KSNVE
• /
• v.9 no.6
• /
• pp.1210-1217
• /
• 1999

This paper presents schematic process of identifying the principal cause to make the vibration problem of rotating circular saws. In the tandem pencil slat saw lines, feeding of cedar blocks is often stopped because excessive motro current is required in a saw motor. These events are called "kick-offs" in technical reports. Research on saw behavior at kick-offs is required to understand are reduce the frequency and severity of kick-offs events. This research aims at finding out the principal cause of kick-offs, and evloving design improvements for high cutting performance with fewer and less severe kick-offs. Measurements of critical speed, cutting force, cutting temeprature and dynamic displacements are carried out to observe the instability mechanism and also to obtain saw design parameters for the numerical analyses. And the numerical analyses involving FEM and multiple scale method are utilized to show the possibility of the principal cause.pal cause.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.29-29
• /
• 1998

고체 추진제 연소불안정에 관한 해석은 준-정상 1차원 해석인 QSHOD(Quasi-Steady Homogcneous One-Dimension)에 의하여 단순화된 지배방정식을 이용하여 응축영역을 해석하는 것이 일반적이다. 이때 외부교란에 대한 기체영역과 표면반응 영역의 응답은 화학반응이 발생하지 않는 고체영역의 응답에 비하여 매우 빠르므로 준-정상적인 거동을 한다. 본 연구에서는 복사열전달에 의한 열속(heat flux)이 고체 추진제의 표면에 존재하며 이 중의 일부가 고체영역에서 흡수될 때 표면에서의 선형교란을 고려한 ZN(Zeldovich-Novozhilov) 방법을 이용하여 연소불안정 현상을 이론적으로 해석하여 연소불안정 현상을 설명할 수 있는 연소 응답함수를 구하였다. 본 연구에서 얻어진 응답함수를 해석함으로써, Zebrowski등$^{(5)}$ 에 의하여 얻어진 복사열 교란에 대한 응답함수가 과소 평가된 응답특성을 나타내고 있음을 알았다. 또한 응답함수의 고유불안정성을 판별하는 민감계수 r과 k의 영역의 해석으로부터 SOn등$^{(6)}$ 에 의하여 밝혀진 안정 경계선의 안정한 영역보다 본 연구에서 구한 안정 경계영역이 줄어드는 경향을 보여주고 있다. 이것은 (6)에서 과소 평가된 복사열전달의 영향을 수정한 결과 때문이다.

• Journal of the KSME
• /
• v.56 no.9
• /
• pp.54-57
• /
• 2016

로켓연소기는 수백 개의 분사기로 구성된 연소실에서 연소반응이 발생하게 된다. 이때 구조적인 특성으로 난류유동, 밀도, 온도 등의 변화가 매우 불균일한 3차원적인 분포를 가지게 된다. 이러한 불균일한 분포에 의해 발생되는 압력의 시간변화가 연소기의 고유진동수와 일치될 경우 공진이 발생하게 되어 폭발이 발생하게 된다. 이러한 현상을 연소불안정이라 하고 이글에서는 관련된 연구의 동향을 소개하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.3-6
• /
• 2003

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.1
• /
• pp.37-46
• /
• 1995

Along with the recent trend of complexity and long distance transmission in power system, dynamic analysis of stability considering the load characteristics is an important subject. In this paper, the influence of the induction motor loads on the power system voltage is investigated. The influence of the inductive load ratio and the inertia of induction motor on the voltage response of the power system are examined, and in the case of the high percentage of the induction motor load, induction motors in the power system can lead to transient voltage instability even under the system condition such as switching operation. The application of static condenser(SC) to prevent the transient voltage instability is introduced.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.6
• /
• pp.443-449
• /
• 2014

Thermoacoustic (TA) models have been widely used to predict combustion instability characteristics in a gas turbine lean premixed combustor. However, these techniques have shown some limitations in improving the model accuracy related to an over-simplification of the combustion system and flame geometry. Efforts were made in the current study to improve the limitations of the TA models. One strategy was to modify the actual flame location in the model, and another was to consider the heat release distribution through the flames. The modified TA model results show better accuracy in predicting the growth rate of instabilities compared with the previous results.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.3
• /
• pp.417-426
• /
• 1999

The some papers which deal with the dynamic instability for shell-like structures under the step load have been published, but there are few papers which treat the essential phenomenon of the dynamic buckling using the phase plane for investigating occurrence of chaos. In nonlinear dynamics, examining the characteristics of attractor on the phase plane and investigating the dynamic buckling process are very important thing for understanding why unstable phenomena are sensitively originated by various initial conditions. In this study, the direct and the indirect snap-buckling of shallow arches considering geometrical nonlinearity are investigated numerically and compared with the static critical load.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.975-979
• /
• 2011

Lean premixed gas turbine combustors were successful in meeting current NOx emission regulations. However, these combustors have been found to be susceptible to combustion instability. In this study, general mechanisms for combustion dynamics and instabilities in lean premixed gas turbine combustors are introduced. In addition, the flame transfer functions in the combustor are experimentally determined. The inputs to the flame transfer function are the imposed velocity fluctuations of the mixture. The key results of the measurements are reviewed.

• The KIPS Transactions:PartA
• /
• v.11A no.2
• /
• pp.203-206
• /
• 2004

Wegmann's method has been known as the most efficient one for the Theodorsen equation that is needed to solve conformal mapping. It was researched in the earlier studies (1). However divergence was revealed in some difficult problems by numerical experiment using Wegmann's method. We analyzed the cause of divergence and proposed an improved method by applying a low frequency pass filter to Wegmann's method. Numerical experiments using the improved method showed convergence for all divergent problems using the Wegmann's method. In this paper, we prove theroretically the cause of convergence in the Numerical experiment using the improved method by applying a low frequency pass filter to Wegmann's method. We make use of Fourier transforms in this theoretical proof of convergence.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.1
• /
• pp.18-27
• /
• 2003

To perform combined tests with propellant feeding system and engine, which were developed for KSR-III launcher, vertical test stand was organized and a series of hot-fire combustion tests were carried out with engines of several injector faceplate types. In hot-fire tests in vertical installation, combustion instabilities occurred right after ignition with an engine without baffle, and such combustion instabilities did not occur at ignition add during mainstage operation for an engine with STS or composite baffle. 1.regular and temporary pressure pulsations(popping) were detected during steady operation with a baffle engine, however a development to combustion instabilities with resonant mode was highly suppressed by baffle. With a series of tests, it was confirmed that the last developed engine, which has composite baffle, was operated successfully in KSR-III flight propulsion system.