• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.43-49
• /
• 2023

Hydrofluoric acid is a less acidic substance than hydrochloric acid, nitric acid, and sulfuric acid, but it is one of the most dangerous substances for humans. In recent years, it has become an indispensable substance in industries such as chemical plants and the semiconductor industry, and although it is a threat to the human body, its use is increasing for various purposes, and the amount of use is constantly increasing due to the expansion and development of the industry. The dangers of hydrogen fluoride have been highlighted since the 2012 accident, which led to a more than fivefold increase in management standards for handling facilities. Hydrogen fluoride converts to hydrofluoric acid when exposed to the air, which can be fatal to humans. This study simulates the effects of a release of a toxic substance in the workplace, even though a protection layer has been provided to minimize the damage caused by the released toxic substance, and recommend ways to control the risk to workers in the event of a release in the workplace.

• Journal of Sericultural and Entomological Science
• /
• v.26 no.2
• /
• pp.11-15
• /
• 1984

To save the labour reguired for separation of copulated moth during egg Production, some of the chemicals available at the market were on screen test for easy separation of copulated moth of silkworm. The obtained results are summarized as following. 1. In a separation ratio of copulated moth along with a treating time, TCTFE(Trichloro-trifluoroethane) completely separated the copulated moth in 10 minutes. The combinations of TCTFE plus Acetone (87.5 : 12.5 V/V) and TCTFE plus Acetic acid (50 : 50 V/V) take 25minutes for the complete separation of copulated moth. Use of Acetic acid solution only makes 100% separation of copulated moth in one hour and foully minutes and non$.$treatment shows only 47.5% of separation in three and half hours. On the other hand. There is no statistical significance between TCTFE Plus Acetone and control in the egg productivity. 2. The combination of TCTFE Plus Acetone (87.5 : 12.5 V/V) does not infuluence the egg productivity of the moth, showing 443 grains for an average number of egg per moth out of which 417 grains are for the number of fertilized eggs while control shows 452 grains for an avarage number of egg/moth and 428 grains for the number of fertilized eggs. However a sing1e use of TCTFE and Acetic acid shows less egg productivity and number of ferilized eggs per moth, respectively as compared to those of the control. In particular, a single use of acetic acid makes an increase of number of non-egg prodncible moth and it seems to be brought due to a chemical damage. 3. In a rearing test of the egg laid by the chemical treated moth, there are no differences among the treatments in all of the useful characters of the larvae; larval duration, survival rate, cocoon yield, single cocoon weight, single cocoon shell weight and cocoon shell ratio. In these regards, it is recognized that TCTFE can be practically used for the separation of copulated moth and the combination of TCTFE and Acetone promote its efiectiveness on the separation of copulated moth.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.4
• /
• pp.361-371
• /
• 2017

Purpose: We aimed to investigate the gene expression of human gingival fibroblasts on microgroove surface using DNA microarray. Materials and methods: Microgrooves were applied on grade II titanium discs to have 0/$0{\mu}m$ (NE0, control group), 60/$10{\mu}m$ (E60/10, experimental group) of respective width/depth by photolithography. The entire surface of the microgrooved Ti substrata was further acid etched and used as the two experimental groups in this study. Human gingival fibroblasts were cultured in the experimental group and the control group, and total RNA was extracted. The oligonucleotide microarray was performed to confirm the changes of various gene expression levels between experimental group and control group. Changes of gene expression level were determined at the pathway level by mapping the expression results of DNA chips, using the KEGG (Kyoto Encyclopedia of Genes and Genomes) pathway analysis. Results: Gene expression levels on E60/10 and NE0 were analyzed, there were 123 genes showing significant differences in expression more than 1.5 times on E60/10 microgrooved surface compared to NE0 surface, and 19 genes showing significant differences in expression more than 2 times. The KEGG pathway analysis confirmed the changes in gene expression levels under experimental conditions. Cell signaling, proliferation, and activity among the various gene expression results were identified. Conclusion: Microgrooved surfaces induce gene expression changes and related cell signaling. According to the results of this study, microgrooves can be used as the surface of various biomaterials which need to improve cell activity through gene expression changes and activation of cell signaling.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.247-251
• /
• 2004

반도체 소자의 제조에 있어 실리콘 표면에 성장한 자연산화막을 제거하기 위해 일반적으로 습식 세정 기술이 이용되어 왔다. 하지만 소자의 최소 선폭(design rule)이 nano급으로 고집적화 됨에 따라 contact hole 바닥의 자연산화막을 깨끗이 제거하는데 있어서 그 한계를 나타나고 있다. 이에 대한 효과적인 대안 공정으로 가스 건식 세정 기술이 연구되고 있다. 본 논문에서는 한 번에 50매 이상의 웨이퍼를 처리함으로써 생산성 측면에서 월등한 배치식 설비에서 원거리 플라즈마(remote plasma) 장치에서 2.450Hz의 마이크로웨이브(${\mu}$-wave)에 의해 형성시킨 수소라디칼과 $NF_3$ 가스를 이용하여 실리콘에 결함을 주지 않고 자연산화막을 선택적으로 제거하는 공정에 대해 고찰하였다. AFM을 이용한 표면분석, TEM을 이용한 물성분석, 그리고 ToF-SIMS 및 XPS를 이용한 화학 분석을 습식 및 건식 세정을 비교 평가한 결과, 건식 세정 공정이 실리콘 표면에 결함을 주지 않고 자연산화막을 제거 할 수 있음을 확인하였다. 산화막$(SiO_2)$, 질화막$(Si_3N_4)$, 그리고 다결정 실리콘(Poly-Si) 등의 각 막질별 식각 특성을 고찰하였으며, $NH_3$의 캐리어 가스인 $N_2$의 주입량을 조절함으로써 수소라디칼 형성 효율의 개선이 가능하였으며, 이로부터 게이트와 소스/드레인 사이를 절연하기 위해 이용되는 질화막의 식각 선택비를 2배 정도 개선할 수 있었다. nano급 소자에 실장하여 평가한 결과에서 불산(HF)에 의한 습식 세정 방식에 비하여 약 $20{\sim}50%$ 정도의 contact 저항 감소 효과가 있음이 확인되었다.두 소자 모두 $40mA/cm^2$ 에서 이상적인 화이트 발란스와 같은(0.33,0.33)의 색좌표를 보였다.epsilon}_0=1345$의 빼어난 압전 및 유전특성과 $330^{\circ}C$의 높은 $T_c$를 보였고 그 조성의 vibration velocity는 약4.5 m/s로 나타났다.한 관심이 높아지고 있다. 그러나 고 자장 영상에서의 rf field 에 의한 SAR 증가는 중요한 제한 요소로 부각되고 있다. 나선주사영상은 SAR 문제가 근원적으로 발생하지 않고, EPI에 비하여 하드웨어 요구 조건이 낮아 고 자장에서의 고속영상방법으로 적합하다. 본 논문에서는 고차 shimming 을 통하여 불균일도를 개선하고, single shot 과 interleaving 을 적용한 multi-shot 나선주사영상 기법으로 $100{\times}100$에서 $256{\times}256$의 고해상도 영상을 얻어 고 자장에서 초고속영상기법으로 다양한 적용 가능성을 보였다. 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을 알 수 있었다. 결론: 뇌활성화 과제 수행시에 동반되는 피험자의 머리 움직임에 의하여 도파민 유리가 과대평가되었으며 이는 이 연구에서 제안한 영상정합을 이용한 움직임 보정기법에 의해서 개선되었다. 답이 없는 문제, 문제 만들기, 일반화가 가능한 문제 등으로 보고, 수학적 창의성 중 특히 확산적 사고에 초점을 맞추어 개방형 문제가 확

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.2
• /
• pp.112-118
• /
• 2012

Purpose: The purpose of this study was to evaluate the difference in shear bonding strength between resin cements to dental materials when a universal primer (Monobond plus) was applied in place of a conventional primer. Materials and methods: Four groups of testing materials: gold alloy (Argedent Euro, n = 16), non precious metal (T-4, n = 20), zirconia (Cercon, n = 20) and glass ceramic (IPS e.max press, n = 20), were fabricated into discs, which were embedded in an acrylic resin matrix. The gold alloy specimens were airborne-particle abraded, 8 of the specimens were coated with Metal primer II, while the remaining 8 specimens were coated with Monobond plus. The non precious and zirconia specimen were airborne-particle abraded then, the control group received Alloy primer coating, while the other was coated with Monobond plus. Glass ceramic specimens were etched. 10 specimens were coated with Monobond-S and the remaining specimens were coated using Monobond plus. On top of the surface, Multilink N was polymerized in a disc shape. All of the specimens were thermal cycled before the shear bonding strength was measured. Statistical analysis was done with Two sample $t$-test or Mann-Whitney U test (${\alpha}$=.05). Results: There were no significant differences in bonding strength depending on the type of primer used in the gold alloy and glass ceramic groups ($P$>.05), however, the bonding strengths of resin cements to non precious metal and zirconia groups, were significantly higher when the alloy primer was used ($P$<.05). Conclusion: Within the limitations of this study, improvement of universal primers which can be applied to all types of restorations is recommended to precious metals and zirconia ceramics. But, the bond strengths of non precious metals and zirconia ceramics were significantly lower when compared to a 10-MDP primer. More research is needed to apply universal primers to all types of restorations.

• Journal of Wetlands Research
• /
• v.9 no.3
• /
• pp.1-12
• /
• 2007

In this study, the correlation of organic content with particle size and type of sediment was found out.Particle size, stratigraphic section and organic content of sediments sampled from Dalpo wetland was analyzed. Dalpo wetland consists of three wetlands, and the area of Dalpo wetland is about $31,295m^2$. The particle size analyses for sampled sediments of 7 points (3 points in wetland A, 3 points in wetland B and 1 point in wetland C) were tested. As results of the particle size analyses, the sediment particle size becomes larger as to the edge of the wetland. It is revealed in order of wetland A > wetland C > wetland B. Borehole surveys with horizontal distance in the major and minor axes of wetland A, the major and minor axes of wetland B and the major axis of wetland C were accomplished. Clayey peat deposit is distributed at 10~90 cm depth below ground surface in the major axis of wetland A. The clayey peat deposit was the most thick at the center of wetland A that horizontal distance is 100 m. As the depth below ground surface of clayey peat deposit is less than 27 cm in the wetland B, we can infer that the life for the wetland B is being finished. Sediment composition of wetland C is simple because wetland C is small scale, and clayey peat deposit is distributed at 10~34 cm depth below ground surface. Sediment sampled by borehole survey in the Dalpo wetland was cut at interval of 10 cm, then organic content was analyzed. Organic content of wetland A sediment showed more than 40% until 70 cm depth below ground surface, also sediment of wetland B is similar to wetland A until 10 cm depth below ground surface, but is showed within 20 % above 30 cm depth below ground surface. Organic content of wetland B is showed the lowest as organic content near the ground surface is about 40%. All of the three wetlands, organic content is showed higher at clayey peat deposit near to ground surface. This is caused by finer particles of the clayey peat deposit, also organic materials were supplied from dead vegetation. Organic content of the Dalpo wetland showed in order of wetland A > wetland C > wetland B. This result is caused by thickness of clayey peat deposit in sediment. Through this study, it was verified that organic content of the Dalpo wetland sediment was dominated by particle size of sediment and vegetation of the upper part.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.116-133
• /
• 2014

The memorial stones of Sumanotap were known to have been sequentially produced in 1719, 1773, 1874, 1653, 1874. However, after examining the chronological era (年號) and sexagesimal cycle (干支), it was found that the second and fourth memorial stones were both recorded in 1713. The reason why the records of the same period were divided into two is assumed that since the subject to repair was divided into main structure and flagpole of the temple, and it was recorded per each monk in charge and donator. On the fifth tablet of the memorial stone of Sumanotap contains all the names of monks who were in charge of repairing Sumanotap as well as the names of common donators. These people are not verified in detail though, through comparing the Buddhist names on the third memorial stone with Buddhist paintings and painting records, 12 monks were identified to be in the same names. Generally, they were active in Gangwon province, Gyeongsang province, Seoul and Gyeonggi province in the late 19th century and even after the Sumanotap repair, they took up other duties of various temples. The most notable name among the donators recorded in the memorial stones of Sumanotap was Kim Jwageun. He was the donator for the chest of gold and silver that was enshrined in the pagoda in 1874. His name was recorded with Mrs. Yang from Cheongsin and, at that time, was known just as a donator. However, actually, the donator was not Kim Jwageun but his mistress Mrs. Yang who used to be a gisaeng, called Na-hap and was from Naju. Kim Jwageun deceased in 1869 already. It is exceptional that Mrs. Yang who were the mistress of the prime minister Kim Jwageun personally participated in the Buddhist event in which king, queen, mothers of king and queen, noblewoman participated. Besides, the event of Sumanotap repair was carried out by royal family in order to celebrate the hundredth day of the prince, Sunjong and his grandfather, Heungseon Daewongun did not participate for political reason. In this situation, the domination of Mrs. Yang is considered remarkable. Meanwhile, the temples that frequently appeared among the 10 temples recorded in the memorial stone of Sumanotap are Gakhwa-sa temple in Bonghwa-gun, Gyeongsangbuk-do and Bodeok-sa temple in Yeongwolgun, Gangwon-do. Gakhwa-sa temple was a temple where the historical achievements were kept so was under the government's control. Bodeok-sa temple was the buddhist temple praying for the soul of the Danjong buried in the tomb and was managed by the government. Therefore, the face these two temples participated in the Sumanotap repair proves that Sumanotap was repaired by the supports form these two temples and the stature of Sumanotap at that time was as high as the temples where the historical achievements are store or the royal buddhist temples for praying for ancestors' souls.