• Journal of the Korean Ceramic Society
• /
• v.30 no.5
• /
• pp.404-410
• /
• 1993

The characterization and sintering behavior of ZnO powders prepared by precipitation method were investigated. ZnO powders were synthesized using the aqueous solutions of ZnCl2 and NH4OH as a precipitation agent, which were crystallized in the shape of plate-like. The grain growth of ZnO(0.68${\mu}{\textrm}{m}$, 1.3${\mu}{\textrm}{m}$ and 3.4${\mu}{\textrm}{m}$) has been studied for temepratures from 100$0^{\circ}C$ to 130$0^{\circ}C$, and the rate of densification was inversely proportional to the ZnO particle size. Densification proceeded slowly by diffusion mechanisms above at 100$0^{\circ}C$. In this work, the grain growth kinetic exponent(n) was 3. The temperature dependence of ZnO grain growth was plotted, and the activation energy of grain growth was 75~85Kcal/mol.

• Journal of the Korean Society of Safety
• /
• v.21 no.3 s.75
• /
• pp.22-30
• /
• 2006

On this study, we developed the electrostatic eliminator for charged particles in manufacturing process. The characteristics of the electrostatic eliminator were investigated, which is two kinds. The first one is Electrical Corona Discharged Type Ionizer. The second one is Photo Ionizer in using soft X-ray. From the experiment, we have obtained the following results. In case of Electrical Corona Discharged Ionizer, neutralization efficiency of charged particles were approximately saturated to 98% over 6.0kV, but as it is non-explosion proof, can not be used in flammable particle treatment process. While in case of photo Ionizer in using soft X-Ray, neutralization efficiency of charged particles were approximately 95%, and more its structure is explosion proof, could be used in flammable particle treatment process.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.154-159
• /
• 2002

최근의 공업제품의 제조에는 미분화기술이 많이 이용되고 있다. 전자공업의 발전 및 제품의 고 기능화에 수반되어, 전자제품은 충분한 강도를 가지면서 경량화, 가공 및 재활용의 용이함 등이 요구되고 있다. 개인단말기나 노트북 등의 전자기기 케이스의 재질은, Mg-Al합금이 많이 사용되어지고 있는데, Mg은 가장 가벼운 금속으로 전자파 차단성, 방열성 등에 뛰어난 반면, 발화 등의 반응위험성이 높으므로, Al과의 합금에 의해, 일정한 기계적 강도 및 반응의 안정화를 기하고 있다. 일반적으로 Mg-Al합금은 9:1의 배합비율로 제조되고 있으며, 완전히 불 활성화시키는 것은 Mg의 장점을 살릴 수 없기 때문에 실용상 어렵다. Mg 이외에도, Ta금속 분은 각종 전자기기의 부 재료로서, Zr은 원자력 등의 공업 부 재료로서 사용이 증가하고 있다.(중략)

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.311-312
• /
• 2009

By applying the vibrating mill modified slag cement on the concrete pile, the higher compressive strength was measured in spite of its smaller powder volume as comparing its compressive strength with existing products' one. As the result of SEM image observation, it was found that the strength was improved by the decreased size and abundance of pore along with increased cement hydrate in the dense structure.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.403-404
• /
• 2009

This study has investigated application of the industrial by-product of reject ash and recycled fine aggregate to consider the economical issue to high flowing CLSM(controled low-strength material). But this high flowing CLSM is required more binder, so it has been estimated the influence of reject ash content, use of recycled fine aggregate and crushed sand, and air content about properties of CLSM.

• Journal of the Korean Ceramic Society
• /
• v.36 no.2
• /
• pp.220-224
• /
• 1999

For the process control of silicon nitride gelcasting, the effect of MeOH on the apparent gel induction time of slip, drying rate, and mechanical property of gelcast body were investigated. The apparent gel induction time showed maximum at 10~20 vol% MeOH and the drying rate of gelcast body increased in the ranged of 25~40%. The gelcast body was still machinable in the 40% of MeOH, though the mechanical property and relative density slightly decreased with increasing the amount of MeOH.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04a
• /
• pp.3-8
• /
• 1998

This research is to examine the relationships between viscosity and fluidity according to binders in the super flowing concrete. And this research is described with respect to rheology concept, confined water ratio($\beta_p$) of binders in paste and mortar, also investigated experimentally the relationships between the relative flowing ratio ($\Gamma_m$) and the funneling velocity ratio($R_m$) on the mortar state according to the water binder ratio(W/B) and the dosage of the superplasticizer. From the confined water ratio tests, it is found that $\beta_p$ of the class C fly ash is higher than that of the class F fly and limestone in paste and mortar, therefore class F fly ash and limestone and super flowing concrete. The result of test, the optimum mix condition to the compactibility if satisfied when the replacement ratio is 30% and $K_p$ is 0.8 for the case of fly ash and limestone.

• Journal of Welding and Joining
• /
• v.20 no.4
• /
• pp.551-556
• /
• 2002

Solid particle erosion wear characteristics of high Cr white iron hardfacing were investigated using the erosion wear test method according with the ASTM G76-95. Wear experiments, where the blast angle, blast distance and blast pressure were selected as test variables, were planned and analyzed by response surface method (RSM to evaluate the wear loss statistically and quantitatively. The measured wear losses well coincided with the calculated ones by the experimental equation. The wear loss of high Cr cast iron hardfacing was increased with blasting pressure, but affected in a complicated way by the blasting angle and distance. Erosion wear of high Cr cast iron hardfacing could be well predicted by RSM analysis of wear variables.

• Journal of the Korean Ceramic Society
• /
• v.35 no.2
• /
• pp.107-114
• /
• 1998

ZnO powder as phosphor was prepared by precipitation method with zinc acetate and ammonia solution and the size and shapes of precipitates were examined with variation of pH and concentration of solution. Its cathodoluminesence properties was evaluated with various heat tratment condition. Optimum con-dition for uniform precipitates was 11.8 of pH and 0.4M of concentration. ZnO:Zn phosphor was obtained by heat treatment of precipitates in reduction atmosphere using ZnS powder. With addition of 20wt% ZnS and 1 hour firing at 1000$^{\circ}C$ the highest cathodoluminescence was obtained.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.3
• /
• pp.210-217
• /
• 2009

Insulated methods of compact bus duct has been applied a way of coating Epoxy powder. The problem which is caused by degradation during operation is very important in severe environment. Therefore, this study compared and verified many kind of properties ; electrical breakdown by thermal and water aging, v-t characteristic, arc discharge, mechanical properties, bending test and cross cut. Sample D was stable before the $T_g$ to be about $7{\sim}10 %$ decrease in the breakdown test according to temperature change. In case of V-t and arc discharge, it had been kept up suitable characteristic. Also, in case of electrical and mechanical characteristic, both sample D and A have excellent capacity.